Pymeter Reptile Heating Pad with PID Thermostat & Timer (Model PY-RHP812) Instruction Manual

1. හැඳින්වීම

This manual provides detailed instructions for the safe and effective use of your Pymeter Reptile Heating Pad with PID Thermostat & Timer. This device is designed to maintain a stable temperature in reptile terrariums, promoting the health and well-being of your pets. It features an integrated PID thermostat for precise temperature control and an adjustable timer function.

Figure 1: Pymeter Reptile Heating Pad with integrated thermostat and timer control unit.

2. වැදගත් ආරක්ෂක අනතුරු ඇඟවීම්

• Do not submerge the heat pad or control unit in water. This product is waterproof but not designed for immersion.
• Keep the heat pad away from water and flammable materials.
• Do not rest the terrarium tank directly on the power cord or plastic housing of the control unit.
• Always disconnect power and allow the heat pad to cool completely before folding or stacking it.
• Ensure the temperature probe is securely fixed at the desired monitoring location within the terrarium to prevent inaccurate readings and potential overheating or underheating.
• This product is intended for use with terrariums and similar enclosures. Do not use for purposes other than its intended design.

3. පැකේජ අන්තර්ගතය

සියලුම සංරචක පැකේජයේ ඇති බව තහවුරු කර ගන්න:

• Pymeter Reptile Heating Pad (8"x12")
• Integrated PID Thermostat and Timer Control Unit
• උෂ්ණත්ව පරීක්ෂණය
• Nano Traceless Strong Adhesive Tape
• උපදෙස් අත්පොත (මෙම ලේඛනය)

4. නිෂ්පාදන පිරිවිතර

Figure 2: Detailed specifications and dimensions of the heating pad and control unit.

5. පිහිටුවීම සහ ස්ථාපනය

Follow these steps to properly install your Pymeter Reptile Heating Pad:

1. මතුපිට සකස් කරන්න: Ensure the terrarium surface where the heat pad will be applied is clean, dry, and free of dust or debris.
2. Apply Adhesive Tape: Use the provided nano traceless strong adhesive tape to secure the heat pad to the desired location on the terrarium. The pad can be mounted on the sides or bottom of the tank. This adhesive allows for removal and reuse without leaving residue.
3. Position the Heat Pad: Place the heat pad on the exterior surface of the terrarium. For optimal heat distribution, ensure it is positioned where your reptile will benefit most from the warmth.
4. Install the Temperature Probe: Fix the temperature probe securely at the hot spot within the terrarium where you need to monitor or maintain the temperature. This is crucial for accurate temperature regulation. Avoid placing the probe directly on the heat pad's surface inside the tank, as this may lead to inaccurate readings.
5. සම්බන්ධක බලය: Plug the heat pad's power cord into a standard 120V power outlet.

රූපය 3: උදාample of heat pad installation on a terrarium side and probe placement.

Figure 4: The removable and reusable adhesive tape for secure mounting.

6. මෙහෙයුම් උපදෙස්

The Pymeter Reptile Heating Pad features an integrated PID thermostat and timer for precise control.

6.1 උෂ්ණත්වය සැකසීම

1. ඔබන්න TEMP button once to enter temperature setting mode. The current set temperature will flash on the display.
2. භාවිතා කරන්න UP සහ පහළට arrow buttons to adjust the desired temperature. The control range is 40°F to 131°F.
3. After setting, the device will automatically save the setting and exit the setting mode if no operation occurs within 2 seconds.

Figure 5: Thermostat control unit with temperature setting interface.

The PID control system ensures that the temperature is maintained within ±1°F of your set point, preventing large temperature swings and optimizing energy consumption by adjusting power output as needed.

Figure 6: PID control ensures stable temperature and energy efficiency.

6.2. ටයිමර් ශ්‍රිතය භාවිතා කිරීම

The default timer mode is always "ON". To select a timed operation:

• ඔබන්න TIME button to cycle through available timer settings: ON, 2 hours, 4 hours, 8 hours, 12 hours.
• Select the desired duration for the heat pad to operate. After the selected time, the heat pad will turn off.

7. නඩත්තුව සහ රැකවරණය

• පිරිසිදු කිරීම: The heat mat is made from premium PVC material, making it simple to clean. Wipe the surface with a damp cloth. Ensure the unit is unplugged and completely cool before cleaning. Do not use abrasive cleaners or immerse the unit in water.
• ගබඩා: When not in use, disconnect the power and allow the heat pad to cool. Store it flat or gently rolled to avoid damage to the internal heating elements. Avoid sharp folds.
• ඇලවුම් පටි: The nano traceless adhesive tape is reusable. If it loses stickiness, clean the surface of the tape and the terrarium.

Figure 7: The heat pad features a waterproof surface for easy cleaning.

8. දෝශ නිරාකරණය

9. වගකීම් සහ සහාය

This Pymeter Reptile Heating Pad comes with a වසර 2ක නිෂ්පාදකයාගේ වගකීමක් මිලදී ගත් දින සිට. මෙම වගකීම් සහතිකය සාමාන්‍ය භාවිතය යටතේ ද්‍රව්‍ය හා වැඩ කිරීමේ දෝෂ ආවරණය කරයි.

For warranty claims, technical support, or any questions regarding your product, please contact Pymeter customer service. Please have your model number (PY-RHP812) and purchase information ready when contacting support.

නිෂ්පාදකයා: PYMETER