Amerec AI Series Comfort-Flo 3/4" Steam Head with Insulator (Model 8816-38) User Manual

1. හැඳින්වීම

Welcome to the user manual for your Amerec AI Series Comfort-Flo 3/4" Steam Head with Insulator. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your steam head. Please read these instructions thoroughly before installation and use to ensure a safe and pleasurable steam bath experience.

2. නිෂ්පාදන අවසන්view

ප්රධාන ලක්ෂණ

• Integral reservoir for a scented steam bath (aromatherapy).
• 3/4 Inch NPT Connection for standard plumbing.
• 180 Degree steam dispersion pattern for even heat distribution.
• Safe operation with an internal Ryton plastic insulator, preventing the exterior metal surface from reaching high temperatures.
• Reduces the time required to reach the desired room temperature.

පැකේජයේ අන්තර්ගතය

• ComfortFlo steam head
• ඉස්ටියල්
• Installation and Operation manual (this document)

නිෂ්පාදන රූපය

This image displays the Amerec AI Series Comfort-Flo 3/4 inch Steam Head with its insulator. The steam head is designed for efficient steam dispersion and includes a reservoir for aromatherapy.

3 ආරක්ෂිත තොරතුරු

වැදගත් ආරක්ෂක උපදෙස්

• ස්ථාපනය කිරීමට සහ භාවිතා කිරීමට පෙර සියලුම උපදෙස් හොඳින් කියවන්න.
• Ensure proper grounding of the steam generator system.
• Do not block the steam outlet during operation.
• Keep children and pets away from the steam head and steam plume.
• Steam is extremely hot; avoid direct contact with the steam plume to prevent burns.
• Installation should be performed by a qualified electrician and plumber in accordance with local codes and regulations.
• Never operate the steam head if it appears damaged or is not functioning correctly.

4. සැකසුම (ස්ථාපනය)

ස්ථාපන අවශ්යතා

• A dedicated 3/4 Inch NPT connection point for the steam head.
• Ensure adequate clearance around the steam head for proper steam dispersion and maintenance.
• Install in a location that allows for safe steam dispersion, away from direct contact with bathers.

ස්ථාපන පියවර

1. Identify the steam outlet pipe in your steam room where the steam head will be installed.
2. Apply an appropriate thread sealant (e.g., PTFE tape or pipe dope) to the 3/4 inch NPT male threads on the steam head.
3. Carefully thread the steam head onto the steam outlet pipe, ensuring a secure and watertight connection. Do not overtighten.
4. Position the steam head to allow for 180-degree steam dispersion without obstruction.
5. Verify all connections are tight and leak-free before operating the steam generator.

5. මෙහෙයුම් උපදෙස්

මූලික මෙහෙයුම

1. Ensure the steam generator is properly connected, filled with water, and powered on (refer to your specific steam generator manual for details).
2. Turn on the steam generator according to its operating instructions.
3. After a short warm-up period, steam will begin to emit from the Comfort-Flo steam head.
4. Adjust steam duration and temperature via your steam generator's control panel as desired.

Using the Fragrance Reservoir

1. Locate the integral fragrance reservoir on the top of the steam head.
2. Carefully add a few drops of your preferred aromatherapy fragrance oil into the reservoir. Do not overfill.
3. The heat from the steam will naturally diffuse the fragrance into the steam room, enhancing your steam bath experience.
4. Clean the reservoir regularly to prevent residue buildup.

6. නඩත්තු කිරීම

Cleaning the Steam Head

Regularly inspect the steam head for mineral buildup or blockages to ensure optimal performance.

1. Ensure the steam generator is turned off and has completely cooled down before attempting any cleaning.
2. Wipe the exterior of the steam head with a soft, damp රෙදි.
3. For stubborn mineral deposits, use a mild descaling solution specifically designed for steam equipment, applying it carefully to avoid contact with the steam outlet. Follow the descaling solution manufacturer's instructions.
4. පිරිසිදු කිරීමෙන් පසු පිරිසිදු ජලයෙන් හොඳින් සෝදන්න.

Insulator Care

The internal Ryton plastic insulator is crucial for preventing the exterior of the steam head from reaching high temperatures. Do not attempt to remove or modify the insulator. If you suspect damage to the insulator or if the exterior of the steam head becomes excessively hot during operation, discontinue use immediately and contact Amerec customer support.

7. දෝශ නිරාකරණය

පොදු ගැටළු සහ විසඳුම්

For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact Amerec customer support for further assistance.

8. පිරිවිතර

නිෂ්පාදන පිරිවිතර

• ආකෘතිය: 8816-38
• ද්රව්ය: Stainless Steel (exterior), Ryton plastic (insulator)
• සම්බන්ධතාවය: අඟල් 3/4 NPT
• Steam Dispersion: අංශක 180
• Dimensions (Steam Head): Width: 3 Inch, Depth: 1 1/2 Inch, Height: 2 1/8 Inch
• නිෂ්පාදන මානයන් (සමස්ත): අඟල් 1.5 x 3 x 2.18
• බර: රාත්තල් 3
• වර්ණය: බ්රෂ්ඩ් ලෝකඩ
• ඇතුළත් සංරචක: Steam head and insulator

9. වගකීම් සහ සහාය

වගකීම් තොරතුරු

Amerec products are manufactured to high-quality standards. For specific warranty details pertaining to your Comfort-Flo Steam Head, please refer to the warranty card included with your steam generator or visit the official Amerec webවෙබ් අඩවිය. ඕනෑම වගකීම් හිමිකම් පෑමක් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගැනීම වැදගත් වේ.

පාරිභෝගික සහාය

For technical assistance, replacement parts, or warranty inquiries, please contact Amerec customer support. Our team is available to help you with any questions or concerns.

Webඅඩවිය: www.amerec.com

දුරකථනය: Please refer to Amerec's official webවත්මන් සම්බන්ධතා අංක සහ ක්‍රියාත්මක වන වේලාවන් සඳහා අඩවිය.