හැඳින්වීම
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Remco 5500 Series ProFlo Demand Pump, model 5537-1E1-65C. This professional-grade pump is designed for various agricultural and industrial spraying applications, offering reliable performance and durability.
ආරක්ෂිත තොරතුරු
Please read and understand all safety instructions before operating the pump. Failure to follow these guidelines may result in injury or damage to the equipment.
- විදුලි ආරක්ෂාව: Ensure the pump is connected to a 115 VAC power source. Use appropriate wiring (14 AWG leads) and ensure all electrical connections are secure and protected.
- උෂ්ණත්ව සීමාවන්: The maximum liquid temperature should not exceed 140°F (60°C). The maximum motor temperature is 180°F (82°C), but for optimal performance and motor life, the motor surface temperature should not exceed 150°F (66°C). The motor is not equipped with thermal protection.
- රසායනික අනුකූලතාව: This pump is compatible with common agricultural chemicals such as herbicides, fertilizers, and insecticides. Always verify chemical compatibility before use to prevent damage to pump components.
- පීඩනය: The pump operates at 60 PSI (4.1 Bar) on demand. Ensure your system can handle this pressure.
- සවි කිරීම: Securely mount the pump using the integrated bracket to prevent vibration and movement during operation.
නිෂ්පාදනය අවසන්view
The Remco 5500 Series ProFlo Demand Pump is a robust 5-chamber diaphragm pump designed for demanding applications. It features a sealed 115 VAC electric motor and durable components for long, continuous duty cycles.
රූපය 1: Remco 5500 Series ProFlo Demand Pump. This image displays the pump with its silver motor housing, black pump head, and black mounting bracket. A label on the motor housing indicates the model number 5537-1E1-65C, flow rate of 5.3 GPM, 115 VAC voltage, and 60 PSI pressure rating. A power cord is visible extending from the motor.
ප්රධාන ලක්ෂණ:
- වෘත්තීය ශ්රේණියේ ගුණාත්මකභාවය
- 5.3 GPM (20.06 LPM) Flow Rate
- 60 PSI (4.1 Bar) On-Demand Operation
- ඇමරිකා එක්සත් ජනපදයේ නිෂ්පාදිත
- අඩි 6 විදුලි රැහැන්
- Chemically compatible with common agricultural chemicals
- 100% Factory Tested
- Completely Sealed Motor
- Low Heat and Power Consumption
- Superior Vertical Priming (up to 14 feet / 4.0 meters)
සැලසුම
- සවි කිරීම: Securely fasten the pump to a stable surface using the integrated mounting bracket. Ensure the pump is positioned to allow for proper ventilation and access for connections.
- ජලනල සම්බන්ධතා: Connect your inlet and outlet lines to the 1/2" FNPT threaded ports. Use appropriate fittings and sealants to ensure leak-free connections. The pump is self-priming up to 14 feet (4.0 meters) vertically.
- විදුලි සම්බන්ධතාවය: Connect the 14 AWG wire leads to a dedicated 115 VAC power supply. Ensure the power source is fused and protected according to local electrical codes. Verify correct polarity.
- පද්ධති ප්රාථමිකකරණය: Before initial operation, ensure the pump and lines are filled with liquid to facilitate priming.
මෙහෙයුම
The Remco 5500 Series pump operates in demand mode, meaning it will run when there is a demand for fluid and shut off when the system pressure reaches 60 PSI. This allows for efficient operation and reduced power consumption.
- පොම්පය ආරම්භ කිරීම: Once all connections are secure and the system is primed, apply power to the pump. The pump will start when a flow demand is detected.
- අධීක්ෂණය: Observe the pump during operation for any unusual noises, leaks, or excessive heat.
- රාජකාරි චක්රය: The pump is designed for intermittent duty cycles. While it can withstand long cycles, continuous operation at maximum load may reduce its lifespan. Monitor motor temperature to ensure it stays below 150°F (66°C).
- Dry Run Capability: The pump has dry run capability, meaning it can operate without fluid for short periods without damage. However, prolonged dry running should be avoided.
නඩත්තු කිරීම
Regular maintenance ensures the longevity and optimal performance of your Remco pump.
- පිරිසිදු කිරීම: Periodically inspect the pump for dirt, debris, or chemical residue. Clean the exterior with a damp රෙදි.
- සම්බන්ධතා: Regularly check all plumbing and electrical connections for tightness and signs of wear or corrosion.
- ශීත ඍතුකරණය: If operating in freezing conditions, ensure the pump and lines are completely drained or protected with appropriate antifreeze solutions to prevent damage.
- Chemical Residue: After using corrosive or sticky chemicals, flush the pump with clean water to prevent buildup and ensure proper valve function.
දෝෂගවේෂණය
This section provides general guidance for common issues. For complex problems, contact Remco customer support.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| පොම්පය ආරම්භ නොවේ | No power, loose electrical connection, faulty switch. | Check power supply, verify connections, test switch. |
| අඩු ප්රවාහය හෝ පීඩනය | Clogged inlet filter, air leak in suction line, worn diaphragm, low voltage. | Clean filter, check for leaks, inspect diaphragm, verify voltage. |
| පොම්පය අඛණ්ඩව ක්රියාත්මක වේ | පද්ධතියේ කාන්දුවක්, දෝෂ සහිත පීඩන ස්විචයක්, පද්ධතිය තුළ වාතය. | Check for leaks, inspect pressure switch, bleed air from system. |
| අධික ශබ්දය හෝ කම්පනය | Loose mounting, cavitation (air in line), debris in pump. | Tighten mounting, ensure proper priming, inspect for debris. |
පිරිවිතර
| වෙළඳ නාමය | Remco |
| ආදර්ශ අංකය | 5537-1E1-65C |
| පොම්ප වර්ගය | 5 Chamber Diaphragm Pump |
| මාදිලිය | ඉල්ලුම |
| වෙළුමtage | 115 VAC |
| උපරිම ප්රවාහ අනුපාතය | 5.3 ජීපීඑම් (20.06 එල්පීඑම්) |
| පීඩන සැකසීම | 60 PSI (4.1 බාර්) |
| Fluid Port | 1/2" FNPT threaded Ports |
| කපාට | විටොන් |
| ප්රාචීරය | සැන්ටොප්රීන් |
| වයර් ඊයම් | 14 AWG - 6" or 12" 2-Pin Mold / Custom Connection |
| ස්වයං-ප්රාථමිකකරණය | Up to 14' (4.0 m) vertically |
| රාජකාරි සයිකල් | අතරමැදි |
| Dry Run Capability | ඔව් |
| උපරිම දියර උෂ්ණත්වය | 140°F (60°C) |
| Max Motor Temperature | 180°F (82°C) (Surface temp should not exceed 150°F / 66°C) |
| UPC | 816624019041 |
| ඇතුළත් සංරචක | පොම්පය |
වගකීම් සහ සහාය
For information regarding product warranty, technical support, or replacement parts, please contact Remco directly through their official website or customer service channels. Keep your purchase receipt and model number (5537-1E1-65C) handy for faster service.
You can visit the Remco store on Amazon for more information: Remco Store
