CORE 10 Person Lighted with Awning

CORE 10 Person Instant Cabin Tent with LED Lights Instruction Manual

Model: 10 Person Lighted with Awning

වෙළඳ නාමය: CORE

1. හැඳින්වීම සහ අවසන්view

This manual provides detailed instructions for the setup, operation, maintenance, and care of your CORE 10 Person Instant Cabin Tent with LED Lights. This tent features an instant hub technology for quick setup, integrated LED lighting, and H20 Block Technology for weather protection.

CORE 10 Person Instant Cabin Tent set up in an outdoor environment with an awning extended.

Image 1.1: The CORE 10 Person Instant Cabin Tent fully assembled.

2 ආරක්ෂිත තොරතුරු

3. පැකේජ අන්තර්ගතය

සැකසුම ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

All components of the CORE 10 Person Instant Cabin Tent laid out on the ground, including the tent body, rainfly, poles, stakes, and carry bag.

Image 3.1: All included components of the tent.

4. සැකසුම් උපදෙස්

The CORE Instant Cabin Tent is designed for a quick and easy setup, typically within 2 minutes.

  1. Unfold the Tent: Lay the tent body flat on your chosen campබිම ඒකාකාරව පැතිරී ඇති බව සහතික කරමින්, අඩවිය.
  2. කණු දිගු කරන්න: Extend the pre-attached poles until they are fully straight.
  3. Lock Poles into Place: Lift the center hub and extend each leg of the tent until the poles click and lock into their upright position. This forms the tent's frame.
  4. Rainfly අමුණන්න: Drape the rainfly over the tent. Secure it by attaching the buckles or clips on the rainfly to the corresponding points on the tent body. Extend and stake out the attached guylines for added stability and weather protection.
  5. Stake the Tent: Secure the tent corners and all guylines to the ground using the provided tent stakes. Ensure stakes are angled away from the tent for maximum hold.
  6. Optional Room Divider: If desired, attach the room divider inside the tent to create two separate rooms.

5. මෙහෙයුම් උපදෙස්

5.1. Built-in LED Lighting System

The tent features integrated LED lights within the ceiling poles, controlled by a wall-mounted switch.

  1. බැටරි ස්ථාපනය කරන්න: Open the battery compartment (located near the light switch) and insert 4D batteries (not included), ensuring correct polarity.
  2. Locate Switch: The wall-mounted light switch is accessible from both the inside and outside of the tent.
  3. මාදිලිය තෝරන්න: Press the switch to cycle through the three lighting modes: ඉහළ (brightest illumination), අඩුයි (reduced brightness), and රාත්රී ආලෝකය (soft, ambient glow). The light-diffusing fabric ensures even illumination.
Close-up of the CORE tent's wall-mounted LED light switch, showing the power and mode buttons.

Image 5.1: LED light control switch.

CORE 10 Person Instant Cabin Tent illuminated at night under a starry sky, showcasing the built-in LED lighting.

Image 5.2: Tent interior illuminated by LED lights.

5.2. Adjustable Ventilation

The tent is equipped with lower air intake vents to draw in cool air and a mesh ceiling to allow hot air to escape, promoting air circulation. Adjust window and door coverings as needed to optimize airflow.

5.3. කාමර බෙදුම්කරු

Utilize the included room divider to create two distinct living or sleeping areas within the tent for added privacy.

5.4. Electrical Cord Access Port

An electrical cord access port is provided for convenient and safe routing of power cords into the tent. Ensure the port is fully zipped when not in use to maintain weather protection.

Close-up of the electrical cord access port on the CORE tent, showing a power cord passing through.

Image 5.3: Electrical cord access port.

6. නඩත්තුව සහ රැකවරණය

7. ගබඩා කිරීම

After cleaning and ensuring the tent is completely dry, fold it neatly and place it into the carry bag. Store the tent in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing heavy items on top of the tent bag.

8. දෝශ නිරාකරණය

9. පිරිවිතර

විශේෂාංගයපිරිවිතර
වෙළඳ නාමයCORE
මාදිලියේ නම10 Person Lighted with Awning
නිෂ්පාදන මානයන් (L x W x H)168" x 120" x 78"
බිම් ප්රදේශයවර්ග අඩි 140
පදිංචිය10 පුද්ගලයා
එකලස් කිරීමේ වේලාව2 Minutes (Instant Setup)
ද්රව්යPolyester (Tent Body, Floor, Rainfly)
කණු ද්‍රව්‍ය වර්ගයAlloy Steel (Pre-Attached)
ජල ප්‍රතිරෝධක තාක්ෂණය1200mm (H20 Block Technology)
ජල ප්රතිරෝධක මට්ටමවතුර කාන්දු නොවන
දොරවල් ගණන2
කාමර ගණන2 (with included divider)
සාක්කු ගණන3
ඍතුඍතු 3 (වසන්ත, ගිම්හාන, සරත්)
Power Source for Lights4D Batteries (not included)
UPC810007488608
Diagram showing the dimensions of the CORE 10 Person Instant Cabin Tent: 168 inches long, 120 inches wide, and 78 inches high.

Image 9.1: Tent dimensions diagram.

10. වගකීම් සහ සහාය

This CORE tent is covered by a වසර 1ක සීමිත වගකීමක් මිලදී ගත් දින සිට. මෙම වගකීම් සහතිකය සාමාන්‍ය භාවිතය යටතේ ද්‍රව්‍ය හා වැඩ කිරීමේ දෝෂ ආවරණය කරයි.

For warranty claims, technical support, or replacement parts, please contact CORE customer service. Keep your proof of purchase for warranty validation.

For further assistance, please visit the official CORE webවෙබ් අඩවිය හෝ ඔබේ මිලදී ගැනීමේ ලියකියවිලි සමඟ සපයා ඇති සම්බන්ධතා තොරතුරු වෙත යොමු වන්න.