AM ARROWMAX Electric Engraving Pen User Manual

1. හැඳින්වීම සහ අවසන්view

The ARROWMAX Electric Engraving Pen (Model AM-230312) is a versatile, cordless rotary tool designed for fine work such as engraving, sanding, grinding, polishing, and carving on various materials including metal, wood, glass, and plastic. It features a high-performance hollow-core motor, an OLED display for status, and magnetic charging for convenience. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

Figure 1: ARROWMAX Electric Engraving Pen and accessories.

2. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• 1 x ARROWMAX Electric Engraving Pen
• 30 x Engraving Bits
• 12 x Polishing Bits
• 1 x ගබඩා බෑගය
• 1 x පරිශීලක අත්පොත
• 1 x USB Charging Cable (Magnetic)

Figure 2: Complete set of included components.

3. නිෂ්පාදන ලක්ෂණ

The ARROWMAX Electric Engraving Pen is equipped with several features designed for precision and ease of use:

• Hollow-Core Motor: Provides 3 times the torque of a regular motor for enhanced precision.
• OLED සංදර්ශකය: Shows battery status, selected mode, and rotation direction.
• චුම්බක ආරෝපණය: Convenient and secure charging directly in the storage case.
• සකස් කළ හැකි වේගය: Four RPM modes (15000, 20000, 25000, 30000 RPM) for various tasks.
• ද්විපාර්ශ්වික භ්රමණය: Easily switch between forward and reverse rotation.
• ඇලුමිනියම් මිශ්‍ර ලෝහ ශරීරය: සුවපහසු හැසිරවීම සඳහා කල් පවතින සහ ergonomic නිර්මාණය.
• ඉක්මන්-වෙනස් චක්: Allows for easy bit changes without additional tools.

Figure 3: Key features of the ARROWMAX Engraving Pen.

Figure 4: Adjustable speed settings.

Figure 5: OLED display indicators.

4. පිහිටුවීම

1. මූලික ගාස්තුව: Before first use, fully charge the engraving pen. Connect the magnetic USB charging cable to the pen's magnetic charging port and a suitable USB power source (e.g., computer USB port, USB wall adapter). The OLED display will indicate charging status. A full charge takes approximately 90 minutes and provides up to 120 minutes of uninterrupted work.
2. බිට් එකක් තෝරා ගැනීම: Choose the appropriate engraving or polishing bit for your task. The kit includes 30 engraving bits and 12 polishing bits suitable for various materials and applications.
3. බිට් එකක් ඇතුළු කිරීම:
   • Unscrew the chuck at the tip of the pen counter-clockwise.
   • Insert the desired bit into the collet. Ensure the bit is fully seated.
   • Tighten the chuck clockwise until the bit is securely held. Ensure it is tightened firmly to prevent the bit from dislodging during operation.
   

   Figure 6: Inserting a bit into the chuck.

5. මෙහෙයුම් උපදෙස්

1. Power On/Off and Rotation Direction:
   • Press the Power button (marked with a circle and vertical line) to turn the pen on. The OLED display will activate.
   • Press the Power button again to switch between clockwise and anti-clockwise rotation. The display will show the current direction.
   • To turn off the pen, press and hold the Power button for a few seconds.
2. සීරුමාරු වේගය:
   • Press the Gear Adjustment button (marked with a 'G' or gear icon) to cycle through the four available RPM modes (15000, 20000, 25000, 30000 RPM).
   • Select the appropriate speed based on the material and task. Lower speeds are suitable for delicate work, while higher speeds are for more aggressive material removal.
3. භාවිත ඉඟි:
   • Always wear appropriate safety glasses to protect your eyes from debris.
   • Hold the pen firmly but comfortably. The ergonomic design allows for precise control.
   • Apply light and consistent pressure. Excessive force can damage the bit, the material, or the tool.
   • For engraving, use a steady hand and guide the bit smoothly along your desired path.
   • For polishing, use the appropriate polishing bits and compounds, moving the tool in small, circular motions.
   • Practice on scrap materials before working on your final project.

Figure 7: Engraving a 3D printed object.

Figure 8: Polishing a metal piece.

Figure 9: Sanding or carving wood.

6. නඩත්තු කිරීම

• පිරිසිදු කිරීම: After each use, wipe down the engraving pen with a soft, dry cloth to remove dust and debris. For stubborn residue, a slightly damp අභ්‍යන්තර කොටස් වලට තෙතමනය ඇතුළු නොවන බවට වග බලා ගනිමින් රෙදි භාවිතා කළ හැකිය.
• බිට් සත්කාරය: Clean bits regularly. Use a small brush to remove accumulated material. Store bits in their designated slots within the aluminum case to prevent damage and loss.
• ගබඩා: Store the engraving pen and all accessories in the provided aluminum case in a cool, dry place, away from direct sunlight and extreme temperatures.
• බැටරි සත්කාර: To prolong battery life, avoid fully discharging the battery frequently. Charge the pen when the battery indicator is low. If storing for an extended period, charge the battery to about 50% every few months.

7. දෝශ නිරාකරණය

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or the official ARROWMAX webවෙබ් අඩවිය. ඕනෑම වගකීම් හිමිකම් පෑමක් සඳහා මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

Manufacturer: Freemax Technology Company Limited (IMPORT)

Contact information (from product box image):

• ලිපිනය: ෆ්ලැට් සී, 2/එෆ්, ඉන්ෆොටෙක් සෙන්ටර්, 21 හන්ග් ටු පාර, ක්වුන් ටොං, හොංකොං
• දුරකථන: +852 3590 9790
• විද්‍යුත් තැපෑල: hello@arrowmax-rc.com

රූපය 10: නිෂ්පාදකයාගේ විස්තර සහිත නිෂ්පාදන ඇසුරුම්.