Poly Wall Mount for TC10 Instruction Manual

හැඳින්වීම

The Poly Wall Mount for TC10 is designed to provide a secure, elegant, and professional way to position your Poly TC10 device. This mount ensures optimal visibility and accessibility for the TC10, making it an ideal solution for various environments where the TC10 needs to be wall-mounted.

ආරක්ෂිත තොරතුරු

• Always ensure the mounting surface is structurally sound and can support the weight of the mount and the Poly TC10 device.
• ස්ථාපනය සඳහා සුදුසු මෙවලම් සහ දෘඩාංග භාවිතා කරන්න. විශ්වාස නැත්නම්, සුදුසුකම් ලත් වෘත්තිකයෙකුගෙන් විමසන්න.
• හුස්ම හිරවීම වැළැක්වීම සඳහා කුඩා කොටස් සහ ඇසුරුම් ද්‍රව්‍ය ළමයින්ගෙන් ඈත් කරන්න.
• Do not overtighten screws, as this may damage the mount or the mounting surface.
• Ensure all cables are routed safely to prevent tripping hazards or damage.

පෙට්ටියේ ඇති දේ

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න.

• Wall mount for TC10
• Mounting hardware (screws, anchors - specific types may vary based on package)

සැකසුම සහ ස්ථාපනය

Follow these steps to properly install your Poly Wall Mount for TC10.

අවශ්‍ය මෙවලම් (ඇතුළත් කර නැත):

• සරඹ
• ඉස්කුරුප්පු නියනක් (පිලිප්ස් හිස නිර්දේශ කෙරේ)
• පැන්සල
• මට්ටම

ස්ථාපන පියවර:

1. ස්ථානය තෝරන්න: Select a suitable wall location for the Poly TC10, ensuring it is at an appropriate height for interaction and visibility. Consider proximity to power outlets and network connections for the TC10.
2. විදුම් ලකුණු සලකුණු කරන්න: Hold the wall mount against the desired location on the wall. Use a pencil to mark the positions for drilling through the mounting holes on the bracket. Use a level to ensure the marks are aligned horizontally.
3. සරඹ නියමු සිදුරු: Using an appropriate drill bit size for your wall anchors (if applicable) and screws, drill pilot holes at the marked points.
4. Insert Anchors (if needed): If drilling into drywall or other hollow surfaces, insert wall anchors into the pilot holes until flush with the wall surface.
5. Attach Mount to Wall: Align the wall mount with the drilled holes (and anchors). Insert the provided screws through the mount's holes and into the wall/anchors. Tighten the screws securely with a screwdriver, but do not overtighten.
6. Mount Poly TC10: Carefully align the Poly TC10 device with the mounted bracket. Gently slide or click the TC10 into place on the wall mount, ensuring it is securely seated and locked. Refer to the Poly TC10's own manual for specific attachment instructions if necessary.
7. කේබල් කළමනාකරණය: Route any necessary cables (power, network) for the TC10 neatly behind or alongside the mount to maintain a clean and professional appearance.

Image: Poly TC10 securely mounted on a wall using the Poly Wall Mount.

කන්ද ක්‍රියාත්මක කිරීම

The Poly Wall Mount is a passive accessory designed to hold the Poly TC10. Its operation is integrated with the use of the TC10 device itself.

• Once the TC10 is securely mounted, it is ready for use as per its own operational guidelines.
• The mount provides a stable and fixed position for the TC10, allowing for consistent interaction.
• Ensure the TC10 is properly seated in the mount at all times to prevent accidental dislodgement.

නඩත්තු කිරීම

To ensure the longevity and appearance of your wall mount:

• Clean the mount periodically with a soft, dry cloth.
• උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්‍රාවක භාවිතා කිරීමෙන් වළකින්න, මන්ද මේවා නිමාවට හානි කළ හැකිය.
• සවි කරන ඉස්කුරුප්පු තද සහ ආරක්ෂිත බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.

දෝෂගවේෂණය

පිරිවිතර

වගකීම් සහ සහාය

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Poly website. For technical support or further assistance, please contact Poly customer service through their official support channels.

Official Poly Webඅඩවිය: www.poly.com