ProLine 116-502 Gas Ball Valve

1. නිෂ්පාදන අවසන්view

The ProLine 116-502 Gas Ball Valve is a forged brass valve designed for reliable shut-off in natural gas or LP gas applications. It features a durable 1-piece body construction and convenient 3/8-inch flare x flare connections. The valve is equipped with a chrome-plated ball and a quarter-turn lever handle for easy operation. This product is CSA 3-88 certified, ensuring compliance with safety and performance standards for gas appliances.

This image displays the ProLine 116-502 Gas Ball Valve, featuring a brass body, a yellow quarter-turn lever handle, and 3/8-inch flare connections on both ends. The valve is designed for gas applications.

2 ආරක්ෂිත තොරතුරු

අවවාදයයි: නුසුදුසු ස්ථාපනය, ගැලපීම, වෙනස් කිරීම, සේවා හෝ නඩත්තු කිරීම දේපල හානි, තුවාල හෝ මරණයට හේතු විය හැක. මෙම උපකරණ ස්ථාපනය කිරීමට හෝ සේවා කිරීමට පෙර ස්ථාපනය, මෙහෙයුම් සහ නඩත්තු උපදෙස් හොඳින් කියවන්න.

• Always ensure gas supply is turned off before installation or maintenance.
• Installation must be performed by a qualified professional in accordance with all local codes and regulations.
• Use appropriate tools and personal protective equipment.
• Check for leaks after installation using a non-corrosive leak detection solution.
• Do not use open flames to check for gas leaks.
• This valve is intended for natural gas or LP gas applications only. Do not use for other media.

3. පිහිටුවීම සහ ස්ථාපනය

This section provides general guidelines for the installation of the ProLine 116-502 Gas Ball Valve. Always refer to local plumbing and gas codes for specific requirements.

3.1 පූර්ව ස්ථාපන චෙක්පත්

1. Verify that the valve model 116-502 is suitable for your specific gas application (natural gas or LP gas).
2. Ensure the connection sizes (3/8-inch flare) match your existing piping.
3. Inspect the valve for any visible damage before installation. Do not install a damaged valve.
4. Gather all necessary tools, including wrenches, pipe thread sealant (if applicable for other connections in the system), and leak detection solution.

3.2 ස්ථාපන පියවර

1. Turn off Gas Supply: Locate the main gas shut-off valve and turn off the gas supply to the area where the valve will be installed.
2. සම්බන්ධතා සකස් කරන්න: Ensure the flare connections on your gas lines are clean and free of debris.
3. සම්බන්ධක කපාටය: Align the valve with the gas lines. Hand-tighten the flare nuts onto the valve's flare connections.
4. සම්බන්ධතා තද කරන්න: Using appropriate wrenches, carefully tighten the flare nuts. Do not overtighten, as this can damage the flare connections. Refer to manufacturer's recommendations for torque specifications if available, or tighten until snug and then an additional quarter to half turn.
5. Restore Gas Supply: Slowly turn the main gas supply back on.
6. කාන්දුවීම් සඳහා පරීක්ෂා කරන්න: Apply a non-corrosive leak detection solution to all new connections. Bubbles indicate a leak. If a leak is detected, turn off the gas supply immediately, re-tighten the connection, and re-test. Repeat until no leaks are present.

4. මෙහෙයුම් උපදෙස්

The ProLine 116-502 Gas Ball Valve is designed for simple on/off operation.

• To Open the Valve: Rotate the yellow lever handle 90 degrees (a quarter-turn) so that it is parallel with the gas flow direction.
• To Close the Valve: Rotate the yellow lever handle 90 degrees (a quarter-turn) so that it is perpendicular to the gas flow direction.

The quarter-turn design allows for quick and easy visual confirmation of the valve's open or closed status.

5. නඩත්තු කිරීම

The ProLine 116-502 Gas Ball Valve is designed for long-term, maintenance-free operation under normal conditions. Regular inspection is recommended.

• වරින් වර පරීක්ෂා කිරීම: Visually inspect the valve and connections periodically for any signs of corrosion, damage, or leaks.
• කාන්දුවීම් පරීක්ෂා කිරීම්: If you suspect a leak, perform a leak check using a non-corrosive leak detection solution.
• පිරිසිදු කිරීම: Clean the exterior of the valve with a damp අවශ්‍ය නම් රෙදි. සැර රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
• පරිශීලක-සේවා කළ හැකි කොටස් නොමැත: This valve contains no user-serviceable parts. Do not attempt to disassemble or repair the valve. If the valve is damaged or malfunctioning, it must be replaced by a qualified professional.

6. දෝශ නිරාකරණය

This section addresses common issues that may arise with gas ball valves. Always prioritize safety and consult a professional for any complex issues.

• Gas Leak Detected:
  • රෝග ලක්ෂණය: Smell of gas, or bubbles when leak detection solution is applied.
  • ක්‍රියාව: Immediately turn off the main gas supply. Re-check all connections for proper tightening. If the leak persists, do not attempt further repairs. Contact a qualified gas technician.
• Valve Difficult to Turn:
  • රෝග ලක්ෂණය: Lever handle is stiff or hard to rotate.
  • ක්‍රියාව: Do not force the handle. Excessive force can damage the valve. If the valve is new, it may be slightly stiff initially. If it becomes stiff over time, it may indicate internal wear or debris. The valve should be replaced by a qualified professional.
• ගෑස් ප්‍රවාහයක් නොමැත:
  • රෝග ලක්ෂණය: Appliance not receiving gas, even with valve in open position.
  • ක්‍රියාව: Ensure the valve handle is fully parallel to the pipe (open position). Check other shut-off valves in the system and the main gas supply. If the issue persists, contact a qualified gas technician.

7. පිරිවිතර

8. වගකීම් තොරතුරු

For specific warranty details regarding the ProLine 116-502 Gas Ball Valve, please refer to the official ProLine website or contact their customer service directly. Warranty terms typically cover manufacturing defects under normal use and service.

9. පාරිභෝගික සහාය

If you have any questions, require technical assistance, or need to report an issue with your ProLine 116-502 Gas Ball Valve, please contact ProLine customer support through their official channels. Always provide the model number (116-502) when seeking support.

සාමාන්‍ය විමසීම් සඳහා, ඔබට පිවිසිය හැක්කේ ProLine brand page on Amazon.