Einhell Professional Sliding Table Saw TP-CC 10 T User Manual

1. හැඳින්වීම

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell Professional Sliding Table Saw TP-CC 10 T. Please read these instructions carefully before using the product and keep them for future reference. Understanding and following these guidelines will ensure optimal performance and extend the lifespan of your tool.

2. ආරක්ෂිත උපදෙස්

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This table saw is designed for cutting wood and wood-like materials. Do not use it for other purposes.

• වැඩ ප්රදේශයේ ආරක්ෂාව: වැඩ කරන ප්‍රදේශය පිරිසිදුව හා හොඳින් ආලෝකමත්ව තබා ගන්න. අවුල් සහගත හෝ අඳුරු ප්‍රදේශ අනතුරු වලට ආරාධනා කරයි. දැවෙන ද්‍රව, වායූන් හෝ දූවිලි වැනි පුපුරන සුලු වායුගෝලයන් තුළ බල මෙවලම් ක්‍රියාත්මක නොකරන්න.
• විදුලි ආරක්ෂාව: බල මෙවලම් පේනු අලෙවිසැලට ගැළපිය යුතුය. කිසි විටෙකත් ප්ලග් එක කිසිම ආකාරයකින් වෙනස් නොකරන්න. පස් සහිත හෝ බිම් සහිත මතුපිට සමඟ ශරීර ස්පර්ශයෙන් වළකින්න.
• පුද්ගලික ආරක්ෂාව: Always wear eye protection, hearing protection, and a dust mask. Do not overreach. Keep proper footing and balance at all times. Dress properly; avoid loose clothing or jewelry.
• බල මෙවලම් භාවිතය සහ රැකවරණය: බල මෙවලමට බල නොකරන්න. ඔබගේ යෙදුම සඳහා නිවැරදි බල මෙවලම භාවිතා කරන්න. කිසියම් ගැලපීමක් කිරීමට, උපාංග වෙනස් කිරීමට හෝ බල මෙවලම් ගබඩා කිරීමට පෙර බල ප්‍රභවයෙන් ප්ලග් එක විසන්ධි කරන්න.
• විශේෂිත මේස කියත් ආරක්ෂාව: Ensure the blade guard is always in place and functioning correctly. Never reach into the blade area while the saw is running. Use push sticks or push blocks when cutting small pieces.

3. නිෂ්පාදන අවසන්view

The Einhell Professional Sliding Table Saw TP-CC 10 T is a powerful tool designed for precise woodworking. It features a 2000 W motor, a 254 mm carbide-tipped saw blade, and a sliding table for handling larger workpieces. Key components include a flexible parallel stop, an adjustable angle stop, and an efficient dust extraction system.

සමස්තයක් වශයෙන් view of the Einhell Professional Sliding Table Saw TP-CC 10 T, highlighting its key features like the special saw blade, parallel stop, sliding table, and angle stop.

ප්රධාන ලක්ෂණ:

• Sliding Table: Facilitates precise cutting of larger workpieces.
• සමාන්තර නැවතුම: Mountable on both sides, with two positions on the right side, and a foldable extension for narrow cuts.
• කෝණ නැවතුම: Solid aluminum construction with 15° increment adjustment, attachable to the sliding table.
• කියත් තලය: 254 mm carbide-tipped blade, tiltable up to 45° and height adjustable.
• මෘදු ආරම්භක කාර්යය: Protects the motor and fuses during startup.
• දූවිලි නිස්සාරණ වරාය: For connecting a wet/dry vacuum cleaner to maintain a clean workspace.
• ශක්තිමත් නිර්මාණය: Solid steel frame with rubberized feet for stability and low vibration.
• Transport Handles & Storage: Multiple handles and integrated holders for accessories and mounting parts for easy transport.

4. පිහිටුවීම

Before initial use, ensure all components are present and undamaged. Refer to the packaging list for verification.

4.1. ඇසිරීම සහ එකලස් කිරීම

1. Carefully remove the table saw and all accessories from the packaging.
2. Place the saw on a stable, level surface.
3. Attach any necessary feet or stands if not pre-assembled.

4.2. කියත් තලය සවි කිරීම

• කියත බල ප්‍රභවයෙන් විසන්ධි කර ඇති බවට වග බලා ගන්න.
• බ්ලේඩ් ආරක්ෂකයා ඉවත් කරන්න.
• Use the provided tools to loosen the blade retaining nut and remove the old blade (if applicable).
• Install the new 254 mm carbide-tipped blade, ensuring the rotation direction matches the arrow on the saw.
• Securely tighten the retaining nut and reattach the blade guard.

Detail of the special saw blade, 254 mm diameter with 24 teeth, designed for efficient cutting.

4.3. Attaching the Parallel Stop

• The parallel stop can be mounted on either side of the saw table.
• Slide the parallel stop into the guide rail and secure it at the desired position using the locking mechanism.
• For narrow cuts, the parallel stop can be positioned closer to the blade using its foldable extension.

The parallel stop, which can be mounted on both sides of the table for versatile cutting operations.

4.4. Positioning the Angle Stop

• Insert the angle stop into the T-slot on the sliding table.
• Adjust the angle to the desired setting (from -60° to +60° with 15° increments) and lock it in place.

Angle stop adjustable from -60° to +60°.

4.5. දූවිලි නිස්සාරණය සම්බන්ධ කිරීම

• Connect a suitable wet/dry vacuum cleaner to the 36 mm/63.5 mm dust extraction port on the saw.
• Ensure a secure connection to minimize dust exposure.

The 36 mm/63.5 mm dust extraction port, designed for connecting an Einhell wet/dry vacuum cleaner to keep the work area clean.

5. මෙහෙයුම් උපදෙස්

Always ensure the saw is stable and the workpiece is properly supported before making any cuts.

5.1. Adjusting Blade Height and Angle

• Use the handwheel to adjust the blade height. The blade should extend slightly above the workpiece.
• To adjust the blade angle for bevel cuts, loosen the locking mechanism and tilt the blade up to 45 degrees. Securely lock it in place before cutting.

The saw blade, showing its ability to tilt up to 45 degrees and its height adjustment mechanism.

5.2. Using the Sliding Table

• For cross-cutting or cutting larger panels, place the workpiece on the sliding table.
• Ensure the workpiece is firmly against the angle stop or a suitable jig.
• Push the sliding table smoothly and steadily through the blade.

The sliding table feature, which can be locked in place for precise cuts.

5.3. Rip Cutting with the Parallel Stop

• Set the parallel stop to the desired width of cut.
• Ensure the workpiece is flat on the table and firmly against the parallel stop.
• Feed the workpiece slowly and evenly into the blade, using a push stick for the final portion of the cut.

A user operating the table saw, demonstrating its use for cutting a wooden plank, emphasizing safety with protective eyewear and mask.

6. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ මේස කියතෙහි ආයු කාලය සහ ආරක්ෂිත ක්‍රියාකාරිත්වය සහතික කරයි.

6.1 පිරිසිදු කිරීම

• පිරිසිදු කිරීමට පෙර සෑම විටම කියත් විසන්ධි කරන්න.
• Remove sawdust and debris from the table, blade guard, and motor housing using a brush or vacuum cleaner.
• Clean the sliding table and guide rails to ensure smooth operation.

6.2. තල රැකවරණය

• Inspect the saw blade regularly for sharpness and damage. Replace dull or damaged blades immediately.
• සුදුසු තල පිරිසිදු කරන්නෙකු භාවිතයෙන් තලයෙන් දුම්මල සහ තාරතාව පිරිසිදු කරන්න.

6.3. සාමාන්ය පරීක්ෂණය

• සියලුම ඉස්කුරුප්පු සහ ගාංචු වල තද බව පරීක්ෂා කරන්න.
• කිසියම් හානියක් සඳහා විදුලි රැහැන පරීක්ෂා කරන්න.
• Ensure all moving parts operate smoothly. Lubricate as necessary according to the product's specific guidelines (if provided in a full manual).

Integrated supports for storing accessories and mounting parts, ensuring a tidy workspace.

7. දෝශ නිරාකරණය

මෙම කොටස ඔබේ මේස කියත සමඟ ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු ආමන්ත්‍රණය කරයි.

8. පිරිවිතර

Technical data for the Einhell Professional Sliding Table Saw TP-CC 10 T.

9. වගකීම් සහ සහාය

Your Einhell Professional Sliding Table Saw TP-CC 10 T comes with a 3-Year Professional Warranty upon online registration. This warranty covers manufacturing defects and ensures the quality and longevity of your product.

9.1. වගකීම් ලියාපදිංචිය

To activate your 3-year professional warranty, please register your product online on the official Einhell website within the specified period after purchase. Refer to the product packaging or the Einhell website for detailed registration instructions.

9.2. පාරිභෝගික සහාය

For technical assistance, spare parts, or warranty claims, please contact Einhell customer support. You can find contact information on the official Einhell website or through your local dealer. When contacting support, please have your model number (TP-CC 10 T) and serial number ready.

The comfortable handle for easy and quick transport of the table saw.