SCHEPPACH BC-PS150-X 20V IXES Cordless 6-inch Chainsaw User Manual

1. නිෂ්පාදන අවසන්view

The SCHEPPACH BC-PS150-X 20V IXES Cordless 6-inch Chainsaw is a compact and lightweight tool designed for efficient pruning, trimming, and cutting tasks. It is part of the Scheppach IXES 20V battery system, allowing for interchangeable use of batteries and chargers across compatible tools. This chainsaw features a maintenance-free brushless motor, automatic chain lubrication, and a quick chain tensioning system for ease of use and extended tool life.

Figure 1: The SCHEPPACH BC-PS150-X cordless chainsaw, shown without battery, featuring its compact design and 6-inch guide bar.

ප්රධාන ලක්ෂණ:

• පහසු හැසිරවීම සඳහා සංයුක්ත සහ සැහැල්ලු නිර්මාණය.
• 6-inch ProCut guide bar and chain for a maximum cutting thickness of 150 mm.
• Maintenance-free brushless motor for high efficiency and extended lifespan.
• Automatic chain lubrication for continuous operation.
• Automatic chain tensioning for quick and easy adjustments.
• Softgrip handle with integrated safety switch for secure operation.
• Hand guard and chain guard for enhanced user safety.
• Compatible with the Scheppach IXES 20V battery system (battery and charger sold separately).
• Cutting speed up to 6.8 m/s for rapid task completion.

Figure 2: Diagram illustrating the benefits of the brushless motor technology, including maintenance-free operation, longer lifespan, reduced thermal load, maximum efficiency, and extended battery runtimes.

2. සැකසීම සහ එකලස් කිරීම

Before initial use, ensure all components are present and undamaged. This unit is supplied without a battery and charger, which must be purchased separately from the Scheppach IXES 20V series.

2.1 බැටරි ස්ථාපනය

1. Ensure the chainsaw is switched off and the safety switch is engaged.
2. Align the battery pack with the battery slot at the base of the chainsaw handle.
3. ආරක්ෂිතව ක්ලික් කරන තුරු බැටරිය ස්ලොට් එකට ලිස්සා යවන්න.
4. ඉවත් කිරීමට, බැටරි මුදා හැරීමේ බොත්තම ඔබා බැටරිය පිටතට ලිස්සා යවන්න.

Figure 3: The Scheppach IXES 20V battery system, illustrating compatibility with various tools. Ensure to use a compatible 20V IXES battery with this chainsaw.

2.2 Chain and Guide Bar Installation (if not pre-assembled)

Refer to the detailed instructions in the separate assembly guide for precise steps on installing the guide bar and chain. Ensure the chain is correctly oriented and seated in the guide bar groove.

2.3 දාම ආතතිය

The chainsaw features an automatic chain tensioning system. However, it is important to periodically check the tension. The chain should be snug against the guide bar but still allow for manual movement. If adjustment is needed, use the tensioning knob as shown.

රූපය 4: සමීප රූපය view of the chainsaw demonstrating the automatic chain tensioning mechanism, which can be quickly and easily adjusted using the knob.

2.4 දාම ලිහිසි කිරීම

The chainsaw is equipped with an automatic chain lubrication system. Before each use, ensure the oil reservoir is filled with appropriate chain oil. Regular lubrication is crucial for optimal performance and chain longevity.

Figure 5: Image showing the automatic chain lubrication system, highlighting the oil filler cap for uninterrupted operation.

3. මෙහෙයුම් උපදෙස්

3.1 ආරක්ෂිත පූර්වාරක්ෂාවන්

• ආරක්ෂිත කණ්නාඩි, අත්වැසුම් සහ ශ්‍රවණ ආරක්ෂණය ඇතුළුව සුදුසු පුද්ගලික ආරක්ෂක උපකරණ (PPE) සැමවිටම පැළඳ ගන්න.
• වැඩ කරන ප්‍රදේශය අවට සිටින අයගෙන්, විශේෂයෙන් ළමයින්ගෙන් සහ සුරතල් සතුන්ගෙන් නිදහස් බව සහතික කර ගන්න.
• Inspect the chainsaw for any damage before each use. Do not operate if damaged.
• Maintain a firm grip on the chainsaw with both hands during operation.
• Be aware of kickback potential and always cut with caution.
• The integrated hand guard and chain guard are designed for your safety. Do not remove or modify them.

Figure 6: The chainsaw equipped with a hand guard, emphasizing safe handling during operation.

Figure 7: Close-up of the safety switch on the chainsaw handle, which must be engaged before starting the tool.

3.2 ආරම්භ කිරීම සහ නැවැත්වීම

1. To start: Press and hold the safety switch, then squeeze the trigger.
2. To stop: Release the trigger. The chain will stop immediately.

3.3 කැපුම් ශිල්පීය ක්‍රම සහ යෙදුම්

The SCHEPPACH BC-PS150-X is versatile for various cutting tasks:

• Pruning Branches: Ideal for trimming branches from trees and shrubs. Ensure stable footing and clear the area around the branch.
• Cutting Firewood: Suitable for cutting smaller logs and firewood. Secure the workpiece to prevent movement.
• General Woodworking: Can be used for cutting planks, square timber, and round timber for various manual work and DIY projects.

Figure 8: The chainsaw in use for pruning a tree branch, demonstrating its suitability for garden maintenance.

Figure 9: The chainsaw being used to cut a log for firewood, showcasing its capability for processing smaller timber.

Figure 10: The chainsaw cutting a wooden plank, illustrating its versatility for various woodworking tasks.

Figure 11: Icons depicting common applications for the chainsaw, including cutting shrubs, bushes, and branches.

4. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ දම්වැල් කියතෙහි ආයු කාලය සහ ආරක්ෂිත ක්‍රියාකාරිත්වය සහතික කරයි.

4.1 පිරිසිදු කිරීම

• After each use, remove the battery and clean the chainsaw thoroughly.
• Use a brush or compressed air to remove sawdust, chips, and debris from the guide bar, chain, and motor housing.
• දැන්වීම සමඟ බාහිර පෘෂ්ඨයන් පිස දමන්නamp රෙදි. දරුණු රසායනික ද්රව්ය හෝ උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න.

4.2 දාම සහ මාර්ගෝපදේශක බාර් රැකවරණය

• Regularly check the chain for sharpness. A dull chain reduces cutting efficiency and increases kickback risk. Sharpen or replace the chain as needed.
• Ensure the automatic lubrication system is functioning and the oil reservoir is filled.
• Inspect the guide bar for wear, especially on the rails. Rotate the guide bar periodically to ensure even wear.

4.3 ගබඩා කිරීම

• දම්වැල් කියත වියළි, ​​ආරක්ෂිත ස්ථානයක, දරුවන්ට ළඟා විය නොහැකි ස්ථානයක ගබඩා කරන්න.
• Always remove the battery before storing for extended periods.
• Use the provided chain guard to protect the chain and prevent accidental contact.

5. දෝශ නිරාකරණය

මෙම කොටසේදී ඔබේ දම්වැල් කියත සමඟ ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සාකච්ඡා කෙරේ.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Scheppach customer support.

6. තාක්ෂණික පිරිවිතර

රූපය 12: අවසන්view of the Scheppach IXES 20V battery platform, highlighting the compatibility of one battery for all devices within the system.

7. වගකීම් සහ සහාය

7.1 වගකීම් තොරතුරු

Specific warranty details for the SCHEPPACH BC-PS150-X chainsaw are typically provided with the product packaging or can be found on the official Scheppach webවෙබ් අඩවිය. ඕනෑම වගකීම් හිමිකම් පෑමක් සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

7.2 පාරිභෝගික සහාය

For technical assistance, spare parts, or any questions regarding your Scheppach product, please contact Scheppach customer service. Contact information can usually be found on the manufacturer's webඅඩවියේ හෝ නිෂ්පාදන ලේඛනවල.

You can visit the official Scheppach webවැඩි විස්තර සඳහා අඩවිය: www.scheppach.com