හැඳින්වීම
This manual provides essential information for the safe and effective installation, operation, and maintenance of your HELLA 2JA 959 037-801 Warning Light. Please read this manual thoroughly before use and retain it for future reference.
ආරක්ෂිත තොරතුරු
නිෂ්පාදනයට තුවාල හෝ හානි වැළැක්වීම සඳහා සෑම විටම පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:
- Ensure the vehicle's power supply is disconnected before installation.
- නිවැරදි රැහැන් ඇදීම සහ සවි කිරීම සහතික කිරීම සඳහා සුදුසුකම් ලත් පුද්ගලයින් විසින් ස්ථාපනය සිදු කළ යුතුය.
- නිෂ්පාදිතය කිසිදු ආකාරයකින් වෙනස් නොකරන්න, මෙය වගකීම් සහතිකය අවලංගු කර ආරක්ෂාවට තර්ජනයක් විය හැකිය.
- මෙහෙයුම් පරිමාව බව තහවුරු කරන්නtage of the vehicle matches the product's specifications (9-33V).
- Securely mount the warning light to prevent detachment during vehicle operation.
නිෂ්පාදනය අවසන්view
The HELLA 2JA 959 037-801 is an LED warning light designed for various automotive applications. It features a robust construction and a green lens, providing a clear flashing warning signal.
Figure 1: HELLA 2JA 959 037-801 Warning Light. This image displays the rectangular warning light with a prominent green LED lens in the center, flanked by yellow end caps.
ප්රධාන ලක්ෂණ:
- LED තාක්ෂණය: Energy-efficient and long-lasting illumination.
- Flashing Warning Signal: Designed for clear visibility and safety.
- පුළුල් වෙළුමtagඊ පරාසය: Operates on 9-33V DC systems.
- ශක්තිමත් ආරක්ෂාව: IP 6K6 and IP 6K7 rated for dust and water ingress.
- ප්රතිලෝම ධ්රැවීයතා ආරක්ෂාව: Safeguards against incorrect wiring.
- නැවත සකස් කළ හැකි: Functionality can be adjusted as needed.
පිරිවිතර
| ගුණාංගය | වටිනාකම |
|---|---|
| ආදර්ශ අංකය | 2 ජේඒ 959 037-801 |
| OEM Reference Number | 2 ජේඒ 959 037-801 |
| වෙළුමtagඊ පරාසය | 9-33 V |
| බලශක්ති පරිභෝජනය | 9 ඩබ්ලිව් |
| සැහැල්ලු නිර්මාණය | LED |
| සැහැල්ලු කාර්යය | Flashing warning signal |
| කාච වර්ණය | කොළ පාටයි |
| සවිකිරීමේ වර්ගය | බෝල්ට් කර ඇත |
| කේබල් දිග | 2500 මි.මී |
| මානයන් (L x W x D) | 20.8 cm x 177 mm x 31 mm (Length x Width x Depth) |
| උස | 100 මි.මී |
| බර | කිලෝ ග්රෑම් 0.5 කි |
| Protection Type (IP Code) | IP 6K6, IP 6K7 |
| Test Mark | EMC, Fulfils ECE norm: R10 |
| ප්රතිලෝම ධ්රැවීයතා ආරක්ෂාව | ඔව් |
| නැවත වැඩසටහන්ගත කළ හැකි | ඔව් |
සැකසුම සහ ස්ථාපනය
- ස්ථාපනය සඳහා සූදානම් වන්න:
- Ensure the vehicle's ignition is off and the battery is disconnected to prevent electrical shock or short circuits.
- Choose a suitable mounting location that provides clear visibility for the warning light and allows for secure bolted mounting.
- ආලෝකය සවි කිරීම:
- The warning light is designed for bolted mounting. Use appropriate fasteners (not included) to secure the unit firmly to the chosen surface.
- Ensure the mounting surface is flat and strong enough to support the light and withstand vehicle vibrations.
- රැහැන් සම්බන්ධතා:
- The light comes with a 2500 mm cable. Connect the positive (+) wire to a switched power source within the 9-33V range.
- Connect the negative (-) wire to a suitable vehicle ground.
- The unit features reverse polarity protection, but correct wiring is always recommended.
- Ensure all connections are secure and insulated to prevent corrosion and short circuits.
- අවසාන පරීක්ෂාව:
- Once mounted and wired, reconnect the vehicle battery.
- Test the warning light to ensure it functions correctly, emitting a clear flashing signal.
මෙහෙයුම් උපදෙස්
The HELLA 2JA 959 037-801 Warning Light is designed for straightforward operation.
- සක්රිය කිරීම: The warning light will activate when power is supplied to its connected circuit. This is typically controlled by a switch in the vehicle's cabin.
- Flashing Signal: Upon activation, the LED light will emit a flashing warning signal.
- නැවත වැඩසටහන්කරණය: This unit can be reprogrammed. Refer to specific HELLA programming tools and software for details on how to adjust flash patterns or other functionalities. This typically requires specialized equipment and knowledge.
නඩත්තු කිරීම
The HELLA 2JA 959 037-801 Warning Light requires minimal maintenance due to its durable design and LED technology.
- පිරිසිදු කිරීම: Periodically clean the lens with a soft, damp cloth and mild soap solution to ensure maximum light output. Avoid abrasive cleaners or solvents.
- පරීක්ෂාව: Regularly check the mounting bolts for tightness and inspect the wiring for any signs of wear, damage, or corrosion.
- හානිය: If the housing or lens is damaged, the unit's IP rating may be compromised. Replace damaged units promptly.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ආලෝකය දැල්වෙන්නේ නැහැ. | No power supply, faulty wiring, blown fuse, incorrect voltage. | Check power connections, vehicle fuse box, and ensure voltage is within 9-33V. Verify wiring for continuity. |
| ආලෝකය දැල්වෙයි හෝ අඳුරු වේ. | Loose connection, insufficient voltage, damaged wiring. | Inspect all wiring connections for tightness. Check vehicle's electrical system for stable voltagඊ ප්රතිදානය. |
| Light pattern is incorrect or inconsistent. | Internal fault, incorrect reprogramming. | If recently reprogrammed, verify the programming steps. If not, contact HELLA technical support for assistance. |
| කාචය ඇතුළත තෙතමනය. | Compromised seal due to damage or improper installation. | Inspect the unit for cracks or damage. Ensure mounting is secure and not causing stress on the housing. Replace if seal is compromised. |
වගකීම් සහ සහාය
For warranty information and technical support, please refer to the official HELLA website or contact your authorized HELLA distributor. Keep your purchase receipt as proof of purchase.
