එෆ්එස්පී චamp Tower 1K UPS User Manual

1. හැඳින්වීම

This manual provides essential information for the installation, operation, and maintenance of your FSP Champ Tower 1K Double-Conversion Uninterruptible Power Supply (UPS). The FSP Champ Tower 1K UPS is designed to provide reliable power protection for critical electronic equipment, ensuring continuous operation during power outages and protecting against various power disturbances. Please read this manual thoroughly before installation and operation to ensure proper use and maximize the lifespan of your unit.

2. ආරක්ෂිත උපදෙස්

Please adhere to the following safety precautions to prevent injury and damage to the UPS or connected equipment:

• විදුලි ආරක්ෂාව: The UPS contains hazardous voltagඋදාහරණයක් ලෙස ඒකකය විසුරුවා හැරීමට උත්සාහ නොකරන්න. සේවා සැපයීම සුදුසුකම් ලත් පුද්ගලයින් විසින් පමණක් සිදු කළ යුතුය.
• භූගත කිරීම: Always connect the UPS to a grounded AC power outlet.
• පරිසරය: Install the UPS in a well-ventilated area, free from excessive dust, humidity, and extreme temperatures. Avoid direct sunlight.
• දියර නිරාවරණය: Do not expose the UPS to rain or moisture. Do not place containers with liquids on or near the UPS.
• අධි බර: Do not overload the UPS. Ensure the total power consumption of connected equipment does not exceed the UPS'ss rated capacity.
• බැටරි හැසිරවීම: Batteries can present a risk of electrical shock and high short-circuit current. Observe proper precautions when working with batteries.
• හදිසි වසා දැමීම: Familiarize yourself with the location of the power button and the procedure for emergency shutdown.

3. පැකේජ අන්තර්ගතය

ඇසුරුම් ඉවත් කිරීමෙන් පසු, පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඇතුළත් කර ඇති බවත් හානි වී නොමැති බවත් කරුණාකර තහවුරු කරගන්න. කිසියම් අයිතමයක් අස්ථානගත වී හෝ හානි වී ඇත්නම්, වහාම ඔබේ අලෙවිකරු අමතන්න.

• එෆ්එස්පී චamp Tower 1K UPS Unit
• පරිශීලක අත්පොත (මෙම ලේඛනය)
• USB සන්නිවේදන කේබලය
• RS232 සන්නිවේදන කේබලය
• බල ආදාන කේබලය
• Output Power Cables (quantity may vary by region)

4. නිෂ්පාදන අවසන්view

4.1 ඉදිරිපස පුවරුව

රූපය 4.1: ඉදිරිපස view of the FSP Champ Tower 1K UPS. This image displays the front of the UPS unit, featuring a prominent blue LCD screen that shows real-time status information such as input/output voltage, load level, and battery status. Below the screen are control buttons labeled 'ON/MUTE', 'SELECT', and 'OFF/ENTER' for managing the UPS functions and navigating the display. The lower section of the front panel has ventilation grilles.

The front panel features an LCD display and control buttons for monitoring and managing the UPS. The LCD provides real-time information on input/output voltage, load level, battery status, and operational mode. The buttons allow for power control, menu navigation, and alarm muting.

4.2 පසුපස පුවරුව

රූපය 4.2: පසුපස view of the FSP Champ Tower 1K UPS. This image shows the back panel of the UPS, which includes several key connections. On the left, there is an 'INPUT' power connector (IEC C14) with a 'CIRCUIT BREAKER' button above it. To the right, there are three 'OUTPUT' power receptacles (IEC C13) for connecting protected devices. Above these, communication ports are visible: a USB port, an RS232 port, and an 'INTELLIGENT SLOT' for optional network management cards.

The rear panel provides all necessary connections for power input, protected power output, and communication interfaces:

• ආදාන බල සම්බන්ධකය: UPS එක උපයෝගිතා බල ප්‍රභවයට සම්බන්ධ කරයි.
• ප්රතිදාන භාජන: සම්බන්ධිත උපකරණවලට බැටරි-ආධාරක සහ සර්ජ්-ආරක්ෂිත බලය සපයන්න.
• පරිපථ බිඳිනය: UPS සඳහා අධි බර ආරක්ෂාව සපයයි.
• USB Port: For connecting to a computer for monitoring and shutdown software.
• RS232 වරාය: අධීක්ෂණය සහ පාලනය සඳහා අනුක්‍රමික සන්නිවේදන වරාය.
• බුද්ධිමත් තව්: For optional SNMP or relay cards to enhance network management capabilities.

5. ස්ථාපනය

1. ඇසිරීම: Carefully unpack the UPS and inspect for any shipping damage.
2. ස්ථානගත කිරීම: Place the UPS on a flat, stable surface in a clean, well-ventilated area. Ensure adequate clearance around the unit for airflow.
3. මූලික ආරෝපණය: Before initial use, connect the UPS to a grounded AC outlet and allow it to charge for at least 8 hours without any load connected. This ensures optimal battery performance.
4. සම්බන්ධක උපකරණ:
   • Connect your critical equipment (computers, monitors, network devices) to the UPS output receptacles.
   • Do not connect laser printers or strip heaters to the UPS output, as their high power draw can overload the unit.
5. සන්නිවේදන සම්බන්ධතා: Connect the USB or RS232 cable from the UPS to your computer for monitoring and automatic shutdown capabilities. Install the provided monitoring software (if applicable) on your computer.

6. මෙහෙයුම

6.1 UPS බල ගැන්වීම

1. Ensure the UPS is connected to a utility power source and has completed its initial charge.
2. Press and hold the 'ON/MUTE' button on the front panel for approximately 2 seconds until you hear a beep. The UPS will start and the LCD display will illuminate.
3. The UPS will perform a self-test and then enter online mode, providing power to connected equipment.

6.2 Powering Off the UPS

1. If the UPS is supplying power from the battery (during a power outage), first shut down all connected equipment gracefully.
2. Press and hold the 'OFF/ENTER' button on the front panel for approximately 2 seconds until you hear a beep. The UPS will shut down.
3. To completely remove power, disconnect the UPS from the AC utility outlet.

6.3 LCD සංදර්ශක සහ පාලන බොත්තම්

The LCD display provides critical status information. Use the 'SELECT' button to cycle through different display parameters (e.g., input voltagඊ, ප්රතිදාන වෙළුමtage, battery capacity, load percentage). The 'ON/MUTE' button can also be used to mute audible alarms during certain events.

7. නඩත්තු කිරීම

• බැටරි සත්කාර: To maintain optimal battery life, ensure the UPS is connected to AC power continuously. Avoid frequent deep discharges. Perform a battery calibration test (if available via software) periodically.
• පිරිසිදු කිරීම: Keep the UPS clean and free of dust. Use a dry cloth to wipe the exterior. Do not use liquid cleaners or solvents. Ensure ventilation openings are clear.
• බැටරි ආදේශනය: Batteries are consumable items and will eventually require replacement. Refer to the manufacturer's guidelines for battery replacement procedures. This should only be performed by qualified service personnel.
• ගබඩා: If storing the UPS for an extended period, ensure it is fully charged, then disconnect it from AC power. Recharge the UPS every 3-6 months to prevent battery degradation.

8. දෝශ නිරාකරණය

This section addresses common issues you might encounter with your UPS. If the problem persists after attempting these solutions, contact technical support.

9. පිරිවිතර

10. වගකීම් සහ සහාය

FSP products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official FSP webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact FSP customer support through their official channels. Contact information can typically be found on the FSP webඅඩවියේ හෝ නිෂ්පාදන ඇසුරුම්වල.

සබැඳි සම්පත්: For additional information, software downloads, and FAQs, please visit the FSP Official Store on Amazon or the main FSP webඅඩවිය.