1. හැඳින්වීම
This manual provides instructions for the proper use and maintenance of AK Interactive AK Real Colors RC818 Pure Blue RAL 5005 lacquer-based paint. AK Real Colors are formulated for scale modeling, offering excellent coverage and a smooth finish. This product is a 17ml bottle of Pure Blue RAL 5005.
Image 1: AK Interactive AK Real Colors RC818 Pure Blue RAL 5005 paint swatch, displaying the color and product branding.
2. සැකසීම සහ සකස් කිරීම
2.1 මතුපිට සකස් කිරීම
Ensure the model surface is clean, dry, and free of dust, grease, or mold lines. A primer is recommended for optimal adhesion and color vibrancy, especially on bare plastic or resin.
2.2 තීන්ත සකස් කිරීම
Before each use, shake the paint bottle thoroughly for at least one minute to ensure pigments are evenly mixed. The paint should be consistently mixed to achieve uniform color and performance.
2.3 Thinning (for Airbrush Application)
AK Real Colors are designed for airbrush application and typically require thinning. Use AK Interactive's specific lacquer thinner or a high-quality lacquer thinner. A common starting ratio is 1 part paint to 1-2 parts thinner, but this can vary based on airbrush nozzle size, desired coverage, and air pressure. Test on a scrap piece before applying to your model.
3. Operating and Application
3.1 Airbrush Application
- වායු පීඩනය: Maintain an air pressure between 15-25 PSI (1.0-1.7 bar), adjusting as needed for desired flow and atomization.
- දුර: Hold the airbrush approximately 5-10 cm (2-4 inches) from the surface.
- Coats: Apply paint in thin, even coats. Allow each coat to dry to the touch before applying the next. Multiple thin coats will provide a smoother finish and better control than one thick coat.
- වියළීමේ කාලය: Lacquer paints dry quickly. They are typically touch-dry within minutes and fully cured within a few hours, depending on humidity and temperature.
3.2 Brush Application
While primarily designed for airbrush, AK Real Colors can be brush-painted for small details. Thin the paint slightly with lacquer thinner to improve flow and reduce brush marks. Apply in thin layers, allowing each layer to dry completely.
4. නඩත්තු කිරීම
4.1 Airbrush Cleaning
Clean your airbrush immediately after use with a dedicated lacquer cleaner or general-purpose airbrush cleaner suitable for lacquers. Disassemble and clean thoroughly to prevent paint from drying inside the airbrush, which can cause clogging and damage.
4.2 බුරුසු පිරිසිදු කිරීම
Clean brushes immediately after use with lacquer thinner or a suitable brush cleaner. Rinse thoroughly and reshape the bristles before storing.
4.3 ගබඩා කිරීම
Store paint bottles upright in a cool, dark place away from direct sunlight and extreme temperatures. Ensure the cap is tightly sealed to prevent evaporation and drying of the paint.
5. දෝශ නිරාකරණය
5.1 Airbrush Clogging
- හේතුව: Insufficient thinning, dried paint in the nozzle, or too low air pressure.
- විසඳුම: Increase thinning ratio, thoroughly clean the airbrush, or increase air pressure.
5.2 Poor Coverage or Uneven Finish
- හේතුව: Paint too thin, too thick, or applied from too far away.
- විසඳුම: Adjust thinning ratio, apply closer to the surface, or apply more thin coats.
5.3 Rough or Grainy Finish
- හේතුව: Paint drying in the air before reaching the surface (overspray), or paint applied too dry.
- විසඳුම: Reduce air pressure, apply closer to the surface, or slightly increase thinning.
6. පිරිවිතර
- නිෂ්පාදන නම: AK Real Colors Pure Blue RAL 5005
- ආදර්ශ අංකය: AK-RC818
- පරිමාව: මිලි ලීටර් 17 යි
- තීන්ත වර්ගය: Lacquer-based
- භාවිතය: Indoor, Outdoor (for models)
- වර්ණ කේතය: RAL 5005
Image 2: AK Interactive AK Real Colors RC818 Pure Blue RAL 5005 equivalences chart, showing cross-references to other paint brands and the previous Real Colors reference (RC010).
7 ආරක්ෂිත තොරතුරු
Always work in a well-ventilated area. Avoid prolonged skin contact and wear appropriate protective gloves. Use eye protection to prevent accidental splashes. Do not ingest. Keep out of reach of children and pets. This product is flammable; keep away from heat, sparks, and open flames. Refer to the product's Safety Data Sheet (SDS) for detailed safety information.
8. වගකීම් සහ සහාය
For information regarding product warranty, technical support, or further inquiries, please visit the official AK Interactive webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
