1. හැඳින්වීම
The M-VAVE SK2 is an isolated power supply unit designed for guitar effect pedals. It provides stable and low-noise power to multiple pedals simultaneously, ensuring optimal performance. This unit features independent power outputs and overcurrent protection for each channel, enhancing reliability and safety for your equipment.
Image 1.1: M-VAVE SK2 Isolated Guitar Pedal Power Supply.
2. විශේෂාංග
- 10 Isolated 9V DC Outputs: Provides clean and stable power to individual pedals, minimizing noise and interference. Each output delivers 300mA.
- 1 USB 5V Output: Dedicated 5V 1A USB output for powering compatible devices or charging.
- Independent Overcurrent Protection: Each output channel is equipped with independent overcurrent protection. If one channel experiences a short circuit, other channels remain operational.
- LED තත්ත්ව දර්ශක: Blue LED lights indicate the operational status of each channel. An LED will turn off if its corresponding channel experiences an overcurrent condition.
- Noise Reduction Circuit Design: Engineered to minimize unwanted noise, contributing to a superior audio experience.
- කල් පවතින ඉදිකිරීම්: Made from lightweight and robust aluminum alloy.
රූපය 2.1: ඉවරයිview of the 11 independent power supply interfaces.
Image 2.2: Short circuit protection with LED indicators for normal operation and short circuit.
3. පැකේජ අන්තර්ගතය
සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:
- M-VAVE SK2 Isolated Guitar Pedal Power Supply Unit
- Power Adapter (DC 12V 2A input)
- 10 x DC Power Cables (for connecting pedals)
Image 3.1: M-VAVE SK2 unit with its accessories.
4. පිහිටුවීම
- බල ඇඩැප්ටරය සම්බන්ධ කරන්න: Plug the provided DC 12V 2A power adapter into the 'DC IN' port on the M-VAVE SK2 unit. Connect the other end of the adapter to a suitable power outlet.
- Connect Effect Pedals: Use the included DC power cables to connect your guitar effect pedals to the 10 isolated 9V DC outputs. Ensure the polarity of the cables matches your pedals' requirements (center negative is standard for most guitar pedals).
- USB උපාංග සම්බන්ධ කරන්න (විකල්ප): If needed, connect a USB-powered device to the 5V 1A USB output port.
- බල ගැන්වීම: Once all connections are secure, the blue LED indicators on the M-VAVE SK2 unit will illuminate, indicating that power is being supplied to the connected channels.
5. මෙහෙයුම
The M-VAVE SK2 operates automatically once connected to power and your pedals. Each blue LED light corresponds to an output channel. When a channel is functioning correctly, its LED will be lit. In the event of an overcurrent or short circuit on a specific channel, its corresponding LED light will turn off, indicating a fault without affecting the operation of other channels.
6 ආරක්ෂිත තොරතුරු
- Use only the provided power adapter. Using an incorrect adapter may damage the unit or connected devices.
- ඒකකය ජලය, තෙතමනය හෝ අධික උෂ්ණත්වයන්ට නිරාවරණය නොකරන්න.
- ඒකකය බිම හෙළීමෙන් හෝ දැඩි බලපෑම්වලට ලක් කිරීමෙන් වළකින්න.
- Do not attempt to open or modify the unit. Refer servicing to qualified personnel.
- ක්රියාත්මක වන අතරතුර ඒකකය වටා නිසි වාතාශ්රය සහතික කරන්න.
7. දෝශ නිරාකරණය
- No power to a pedal:
- Check if the LED indicator for that specific output channel is off. If it is, disconnect the pedal from that output and check the pedal for faults. The LED turning off indicates an overcurrent or short circuit on that channel. Reconnect the pedal only after resolving the issue.
- No power to any pedal:
- Ensure the power adapter is securely connected to both the M-VAVE SK2 unit and a working power outlet. Verify that the power adapter itself is functional.
- Unwanted noise in the audio signal:
- While the SK2 features noise reduction, external factors can still introduce noise. Ensure all cables are properly shielded and connected. Test pedals individually to identify if a specific pedal is generating noise. Check for ground loops in your setup.
8. පිරිවිතර
| පරාමිතිය | වටිනාකම |
|---|---|
| ආදර්ශ අංකය | SK2 |
| බල ආදානය | DC 5V-12V (via 12V 2A adapter) |
| DC ප්රතිදාන නාලිකා | 10 x DC 9V 300mA (isolated) |
| USB Output Channel | 1 x USB 5V 1A |
| නිෂ්පාදන මානයන් (L x W x H) | 4 x 1.9 x 6 අඟල් (158 x 50 x 25 මි.මී.) |
| අයිතමයේ බර | රාත්තල් 1.15 (ග්රෑම් 225) |
| ඉදිකිරීම් ද්රව්ය | ඇලුමිනියම් මිශ්ර ලෝහය |
| සිසිලන ක්රමය | වාතය |
| ගැළපෙන උපාංග | Guitar Effect pedals |
Image 8.1: Dimensions of the M-VAVE SK2 unit.
Image 8.2: Top and side view of the M-VAVE SK2 unit.
9. නඩත්තු කිරීම
- පිරිසිදු කිරීම: ඒකකයේ බාහිර පිරිසිදු කිරීම සඳහා මෘදු වියළි රෙද්දක් භාවිතා කරන්න. දියර පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න.
- ගබඩා: භාවිතයේ නොමැති විට සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ඒකකය ගබඩා කරන්න.
- කේබල් කළමනාකරණය: හානි වළක්වා ගැනීම සඳහා විදුලි රැහැන් ඇඹරී හෝ ආතතියට පත් නොවන බවට වග බලා ගන්න.
10. වගකීම් සහ සහාය
The M-VAVE SK2 Isolated Guitar Pedal Power Supply comes with a one-year warranty from the date of purchase. For any product-related issues or support inquiries, please contact M-VAVE customer service. When contacting support, provide your purchase details and a clear description of the issue.
