1. හැඳින්වීම
The FCOB CCT Dual White RF Remote RC02RFB is designed for controlling CCT (Correlated Color Temperature) LED strips. This remote features 2.4GHz RF wireless transmission, allowing for 4-zone group control, brightness adjustment, and color temperature tuning. It is compatible with various FCOB CCT controllers, providing a convenient solution for managing your LED lighting.
2. පැකේජ අන්තර්ගතය
කරුණාකර ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:
- 1x RC02RFB Remote Control
- 1x RF Remote Bracket
- 2x Screws for Bracket Installation
- 1x Double-sided Adhesive for Bracket Installation
- 1x RC02RF Remote Control Manual (this document)
Note: 3A batteries are required for the remote control and are not included in the package.
Image: The FCOB CCT Remote RC02RFB, shown alongside its wall-mount bracket and two screws for installation.
3. නිෂ්පාදන අවසන්view
3.1 Remote Control Layout and Functions
Image: A detailed diagram illustrating each button and feature on the FCOB CCT Remote RC02RFB, including ON/OFF, color temperature slider, brightness controls, dynamic modes, and zone selection.
- මාස්ටර් සක්රිය / අක්රිය: Power on or off all linked devices.
- Color Temp Adjust Slider: Touch to dim brightness from 1% to 100% and adjust color temperature.
- නියමුවා එල්amp: දර්ශක ආලෝකය.
- Cold-Warm White Switching: Press to cycle through cool white, nature white, and warm white.
- දීප්තිය +/-: දීප්තිය වැඩි කිරීම හෝ අඩු කිරීම.
- Dynamic Modes (M): Press to switch between various dynamic lighting modes.
- 100%/60%/30% Brightness: Shortcut buttons for specific brightness levels.
- වේගය +/-: ගතික මාදිලිවල වේගය සකසන්න.
- Zone ON/(un)link Button (1-4): Turn on a specific zone or initiate linking/unlinking.
- Zone OFF/Night Light Mode: Turn off a specific zone or activate night light mode.
4. පිහිටුවීම
4.1 බැටරි ස්ථාපනය
The RC02RFB remote control requires 3A batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, ensuring correct polarity.
4.2 Linking Instructions
To link the remote control to an FCOB CCT controller:
- Disconnect the LED controller from its power supply for 10 seconds.
- Reconnect the LED controller to the power supply.
- Within 3 seconds of reconnecting power, short press the desired zone button (1, 2, 3, or 4) on the remote control 3 times.
- The LED strip connected to the controller will blink slowly 3 times, indicating successful linking.
Image: Visual guide for linking the remote control to an LED strip controller, detailing power cycling and button presses.
Important: If the LED strip does not blink slowly, linking has failed. Please repeat the above steps. A light that has already been linked cannot be linked again to the same zone.
4.3 Unlinking Instructions
To unlink the remote control from an FCOB CCT controller:
- Disconnect the LED controller from its power supply for 10 seconds.
- Reconnect the LED controller to the power supply.
- Within 3 seconds of reconnecting power, short press the previously connected zone button (1, 2, 3, or 4) on the remote control 5 times.
- The LED strip connected to the controller will blink quickly 10 times, indicating successful unlinking.
Image: Visual guide for unlinking the remote control from an LED strip controller, detailing power cycling and button presses.
Important: If the LED strip does not blink quickly, unlinking has failed. Please repeat the above steps. A light that hasn't been linked does not need to be unlinked.
5. Installation of Remote Bracket
The included remote bracket allows for convenient storage and access to your remote control. You can install it using either screws or double-sided adhesive.
5.1 Installation with Screws
- Choose a suitable location on a wall or surface.
- Mark the positions for the two screws using the bracket as a template.
- අවශ්ය නම් නියමු සිදුරු හාරන්න.
- Secure the bracket to the surface using the provided screws.
5.2 Installation with Double-Sided Adhesive
- Ensure the installation surface is smooth, clean, and dry.
- Peel off the protective backing from one side of the double-sided adhesive.
- Apply the adhesive firmly to the back of the remote bracket.
- Peel off the remaining protective backing and press the bracket firmly onto the desired surface.
Image: Illustrations demonstrating how to install the remote control bracket using either screws or double-sided adhesive.
6. මෙහෙයුම් උපදෙස්
6.1 බල පාලනය
ඔබන්න ON button to turn on all linked LED strips. Press the අක්රියයි button to turn off all linked LED strips.
6.2 දීප්තිය ගැලපීම
- Touch Slider: Gently touch and slide your finger along the color temperature adjust slider to dim the brightness from 1% to 100%.
- Brightness +/- Buttons: ඔබන්න දීප්තිය + දීප්තිය වැඩි කිරීමට සහ දීප්තිය - දීප්තිය අඩු කිරීමට.
- Preset Brightness Buttons: භාවිතා කරන්න 100%, 60%, හෝ 30% buttons for quick brightness level selection.
6.3 වර්ණ උෂ්ණත්වය ගැලපීම
Use the touch slider to adjust the color temperature of your CCT LED strips. Slide towards the yellow side for warmer white light and towards the blue side for cooler white light. You can also press the සීතල-උණුසුම් සුදු මාරු කිරීම button to cycle through cool white, nature white, and warm white presets.
Image: A user adjusting the color temperature on the remote, demonstrating the transition from warm white to cool white light.
6.4 ගතික මාදිලි
ඔබන්න M button to cycle through various pre-programmed dynamic lighting modes. Use the වේගය + සහ වේගය- buttons to adjust the speed of the selected dynamic mode.
6.5 Zone Control and Grouping
The RC02RFB remote supports controlling up to 4 independent zones. Each zone can control one or multiple linked controllers.
- Zone ON: Press the corresponding zone button (1, 2, 3, or 4) to turn on the lights in that specific zone.
- Zone OFF/Night Light: Press the corresponding zone button (1, 2, 3, or 4) again to turn off the lights in that zone or activate night light mode if supported by the controller.
The remote features auto-transmitting and auto-sync functions. One controller can transmit signals to another controller within 30 meters (98 feet), extending the effective control distance. This allows for independent control of individual areas without device limits.
Image: A visual representation of the 4-zone wireless control capability, demonstrating how one remote can manage LED controllers across different areas of a home.
Image: An illustration detailing the auto-transmitting and auto-sync features, where one controller relays signals to others, extending the control range.
7. ගැළපුම
The RC02RFB remote control is designed to work with FCOB CCT controllers. Compatible controllers include, but are not limited to:
- C02RF Controller
- C02W Controller
- WB5 Controller
- LM051 Controller
- LM052 Controller
- LM053 Controller
It supports 5050SMD, 3528SMD, 5630SMD CCT FCOB COB CCT 3-wire (+ WW CW) LED strips. Please note that this remote requires a compatible controller to function.
Image: The FCOB CCT remote displayed with several compatible CCT controllers (C02W, C02RF, WB5, LM051, LM052, LM053) and an illuminated LED strip, illustrating system compatibility.
8. දෝශ නිරාකරණය
- දුරස්ථ පාලකය ප්රතිචාර නොදක්වයි: බැටරි නිවැරදිව ස්ථාපනය කර ඇති බවත් ප්රමාණවත් ආරෝපණයක් ඇති බවත් සහතික කර ගන්න. අවශ්ය නම් බැටරි ප්රතිස්ථාපනය කරන්න.
- Linking failure: If the LED strip does not blink as expected during linking, repeat the linking steps carefully. Ensure the remote is within close proximity to the controller during the linking process.
- අතරමැදි පාලනය: Check for obstructions between the remote and the controller. Ensure the remote is within the specified 98-foot (30-meter) control range.
- Incorrect color temperature/brightness: Verify that the remote is correctly linked to the desired zone. Adjust settings using the touch slider and dedicated buttons.
9. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| වෙළඳ නාමය | FCOB |
| ආදර්ශ අංකය | RC02RFB-Z |
| අයිතමයේ බර | අවුන්ස 3.52 කි |
| පැකේජ මානයන් | අඟල් 5.91 x 5.91 x 0.79 |
| Power Source (Controller) | AC/DC (Remote uses batteries) |
| අවශ්ය බැටරි | Yes (3A batteries, not included) |
| විශේෂ ලක්ෂණය | රැහැන් රහිත |
| සම්බන්ධතා තාක්ෂණය | Radio Frequency (2.4GHz) |
| පාලන පරාසය | අඩි 98 (මීටර් 30) දක්වා |
| ගැළපෙන උපාංග | C02RF, C02W, LM051, LM052, LM053, WB5 Controllers |
9.1 බලශක්ති කාර්යක්ෂමතා තොරතුරු
Image: The energy label for FCOB CCT products, indicating an energy efficiency class of F and an energy consumption of 42 kWh per 1000 hours.
For more details, visit the EPREL database: https://eprel.ec.europa.eu/qr/1552759
10. ආරක්ෂිත තොරතුරු සහ අනතුරු ඇඟවීම්
10.1 General Attention
- ගබඩා උෂ්ණත්වය: -40℃ සිට +80℃ දක්වා
- මෙහෙයුම් උෂ්ණත්වය: -25℃ සිට +60℃ දක්වා
- ස්ථාපන මතුපිට: Must be smooth, clean, and dry.
- LED Components: The part of LED components cannot be fixed on the surface of a sharp edge.
- LED තීරුව: The strip cannot be collided or crushed. The strip can be cut following the cutting lines only.
10.2 Packaging Warning
Image: A close-up of the product packaging, displaying caution regarding moisture and electrostatic sensitive devices, and a warning about the plastic bag being a suffocation hazard.
CAUTION! THIS BAG CONTAINS MOISTURE ELECTROSTATIC SENSITIVE DEVICES!
WARNING! To avoid the danger of suffocation, keep this plastic bag away from babies and children. Do not use this bag in cribs, beds, baby strollers, or playpens. This bag is not a toy.
11. වගකීම් සහ සහාය
For technical support, warranty information, or other inquiries, please contact the manufacturer:
- නිෂ්පාදකයා: SHENZEN CHAOGUOSE Technology Co., Limited
- උපකාරක ඊමේල්: support@fcob.com
- Webඅඩවිය: www.fcob.com
- ලිපිනය: 201, 2F, C-C2, Chuangfu Tech Park, Beihuan Rd, Shiyan St, Baoan District, Shenzhen, Guangdong, China
- EC නියෝජිත: Like Sun GmbH, Planckstr. 59, 45147 Essen
