YUHANUS 125KHZ RFID ID Cards Keypad Panel User Manual

1. හැඳින්වීම

The YUHANUS 125KHZ RFID ID Cards Keypad Panel is a robust access control system designed for secure entry management. It supports up to 1000 user cards and a unique PIN, offering multiple access methods including ID card, PIN, or a combination of both. Constructed from fire-resistant ABS material, this keypad ensures durability and safety. It features full programming directly from the keypad, an anti-tamper alarm, and supports an external doorbell chime. This manual provides detailed instructions for installation, operation, and maintenance.

2 ආරක්ෂිත තොරතුරු

• ස්ථාපනය සහ ක්රියාත්මක කිරීමට පෙර සියලු උපදෙස් ප්රවේශමෙන් කියවන්න.
• Ensure power is disconnected before wiring to prevent electrical shock.
• This device is designed for indoor use or protected outdoor environments. Avoid direct exposure to water or extreme weather conditions.
• Only use the specified power supply (DC 12V).
• ඒකකය ඔබම විසුරුවා හැරීමට හෝ අලුත්වැඩියා කිරීමට උත්සාහ නොකරන්න. සේවාව සඳහා සුදුසුකම් ලත් පුද්ගලයින් අමතන්න.

3. පැකේජ අන්තර්ගතය

• 1x YUHANUS 125KHZ RFID ID Keypad Panel
• 10x 125KHZ ID Keyfobs
• සවි කරන ඉස්කුරුප්පු සහ බිත්ති ප්ලග්
• පරිශීලක අත්පොත (මෙම ලේඛනය)

Image: Included 125KHZ ID Keyfobs

4. නිෂ්පාදන අවසන්view

The keypad panel features a numeric keypad, status indicator LEDs, and a doorbell button. The rear panel includes wiring terminals and an anti-tamper ස්විචය.

රූපය: ඉදිරිපස view of the Keypad Panel

Image: Keypad Panel with External Doorbell Connection

Image: Anti-Tamper Switch (Internal)

5. පිරිවිතර

Image: Product Dimensions

6. පිහිටුවීම

6.1 සවි කිරීම

1. Choose a suitable mounting location, typically near the door to be controlled. Ensure it is protected from direct weather exposure if installed outdoors.
2. Mark the drilling points for the mounting screws using the backplate as a template.
3. අවශ්‍ය නම් සිදුරු විද බිත්ති පේනු ඇතුළු කරන්න.
4. පසුතලය බිත්තියට සවි කරන්න.

6.2 රැහැන්

වැදගත්: Disconnect all power before performing any wiring connections.

Image: Wiring Terminal Block

Image: Wiring Diagram of the Access Control System

Refer to the wiring diagram above and the terminal block image for connections. Common connections include:

• +12V සහ GND: Connect to a DC 12V power supply.
• NO/PUSH, COM, NC: Connect to your electric lock (e.g., magnetic lock, electric strike).
• විවෘත: Connect to an exit button.
• BELL, BELL: Connect to an external doorbell chime.

6.3 ආරම්භක බල-අප්

1. After completing all wiring, apply DC 12V power to the unit.
2. The keypad will emit a beep, and the indicator lights will flash, indicating successful power-up.
3. The default Master Code is typically 123456. It is highly recommended to change this immediately after initial setup.

7. මෙහෙයුම් උපදෙස්

7.1 ක්‍රමලේඛන මාදිලිය

To enter programming mode: Press * then enter the Master Code (default: 123456) then press #. The red LED will illuminate.

To exit programming mode: Press *. The red LED will turn off.

7.2 ප්‍රධාන කේතය වෙනස් කරන්න

1. ක්‍රමලේඛන මාදිලිය ඇතුල් කරන්න.
2. ඔබන්න 0.
3. Enter your new 6-digit Master Code.
4. ඔබන්න # තහවුරු කිරීමට.
5. ක්‍රමලේඛන මාදිලියෙන් පිටවන්න.

7.3 Adding User Cards/PINs

පද්ධතිය පරිශීලකයින් 1000ක් දක්වා සහය දක්වයි.

1. ක්‍රමලේඛන මාදිලිය ඇතුල් කරන්න.
2. ඔබන්න 1 to add a user.
3. For Card Only Access: Present the ID card to the keypad. The keypad will beep, and the card is added.
4. For PIN Only Access: Enter a 4-6 digit PIN, then press #. Repeat the PIN and press # තහවුරු කිරීමට නැවතත්.
5. For Card + PIN Access: Present the ID card, then enter a 4-6 digit PIN, then press #. Repeat the PIN and press # තහවුරු කිරීමට නැවතත්.
6. To add more users, repeat step 3 or 4.
7. ක්‍රමලේඛන මාදිලියෙන් පිටවන්න.

7.4 Deleting User Cards/PINs

1. ක්‍රමලේඛන මාදිලිය ඇතුල් කරන්න.
2. ඔබන්න 2 to delete a user.
3. To Delete by Card: Present the ID card to the keypad. The keypad will beep, and the card is deleted.
4. To Delete by PIN: Enter the 4-6 digit PIN, then press #.
5. To delete more users, repeat step 3 or 4.
6. ක්‍රමලේඛන මාදිලියෙන් පිටවන්න.

7.5 Accessing the Door

Image: User Interacting with Keypad

• Card Only: Present your registered ID card to the keypad. The green LED will flash, and the door will unlock.
• PIN Only: Enter your registered 4-6 digit PIN, then press #. The green LED will flash, and the door will unlock.
• Card + PIN: Present your registered ID card, then enter your 4-6 digit PIN, then press #. The green LED will flash, and the door will unlock.

7.6 Doorbell Function

Press the doorbell button (bell icon) on the keypad to activate the external doorbell chime (if connected).

Image: Doorbell Button

7.7 ප්‍රති-ටීampඑර් එලාම්

If the keypad is forcibly removed from its mounting location, the built-in anti-tamper switch will trigger a loud alarm. To silence the alarm, re-secure the keypad or enter the Master Code.

8. නඩත්තු කිරීම

• Clean the keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Regularly check wiring connections for any signs of wear or damage.
• Ensure the keypad is securely mounted to prevent accidental tampering.

9. දෝශ නිරාකරණය

• යතුරු පෑඩය ප්‍රතිචාර නොදක්වයි: Check power supply connections. Ensure DC 12V is correctly applied.
• Door does not unlock:
  • Verify the ID card or PIN is correctly registered.
  • Check wiring to the electric lock. Ensure COM, NO/PUSH, NC connections are correct for your lock type.
  • Confirm the power supply is adequate for both the keypad and the lock.
• විරෝධී ටීamper alarm triggers unexpectedly: Ensure the keypad is firmly attached to its mounting surface and the anti-tampස්විචය නිසි ලෙස සම්බන්ධ කර ඇත.
• Cannot enter programming mode: Double-check the Master Code. If forgotten, a factory reset may be required (refer to advanced programming instructions, not covered in this basic manual).

10. වගකීම් සහ සහාය

වගකීම් තොරතුරු හෝ තාක්ෂණික සහාය සඳහා, කරුණාකර ඔබේ සිල්ලර වෙළෙන්දා හෝ නිෂ්පාදකයා සෘජුවම අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.