VTech IS8151

VTech IS8151 සුපිරි දිගු දුර DECT 6.0 රැහැන් රහිත දුරකථන පරිශීලක අත්පොත

මාදිලිය: IS8151

හැඳින්වීම

This manual provides detailed instructions for the setup, operation, and maintenance of your VTech IS8151 Super Long Range DECT 6.0 Cordless Phone system. Please read this manual thoroughly to ensure proper use and to take full advantage of all available features, including Bluetooth Connect to Cell and Smart Call Blocker.

පැකේජයේ අන්තර්ගතය

ඔබේ පැකේජයේ පහත අයිතම අඩංගු බව තහවුරු කරන්න:

VTech IS8151 Cordless Phone System components

Image: The VTech IS8151 cordless phone system, showing the base unit and a handset.

සැලසුම

1. බැටරිය ස්ථාපනය කිරීම

  1. ජංගම දුරකථනයේ පිටුපස බැටරි කොටසේ කවරය විවෘත කරන්න.
  2. බැටරි පැක් ප්ලග් එක මැදිරිය තුළ ඇති ජැක් එකට ආරක්ෂිතව සම්බන්ධ කරන්න.
  3. Place the battery pack with the label UP and tuck the wires neatly inside the compartment.
  4. Slide the battery compartment cover back into place until it clicks.

2. මූලික ඒකකය සම්බන්ධ කිරීම

  1. Plug the small end of the AC adapter into the power jack on the back of the base unit.
  2. Plug the large end of the AC adapter into a wall outlet not controlled by a wall switch.
  3. දුරකථන රැහැන් ලණුවේ එක් කෙළවරක් මූලික ඒකකයේ පිටුපස ඇති TEL LINE ජැක් එකට සම්බන්ධ කරන්න.
  4. දුරකථන රැහැන් ලණුවේ අනෙක් කෙළවර දුරකථන බිත්ති ජැක් එකකට සම්බන්ධ කරන්න.

3. Handset ආරෝපණය කිරීම

Place the handset in the base unit or charger with the display facing up. The CHARGE light on the handset will illuminate, indicating proper charging. Allow at least 16 hours for the battery to fully charge before initial use.

VTech IS8151 Handset in charging cradle

Image: A VTech IS8151 handset placed in its charging cradle, connected to the base unit.

මෙහෙයුම් උපදෙස්

ඇමතුම් ලබා ගැනීම සහ ලබා ගැනීම

බ්ලූටූත් සෛලයට සම්බන්ධ කරන්න

This feature allows you to connect your cellular phone(s) to the VTech IS8151 system via Bluetooth, enabling you to make and receive cell calls using your cordless handsets. You can pair up to two cell phones or one cell phone and a Bluetooth headset.

  1. Pairing a Cell Phone:
    • On the base unit, press and hold සෛල 1 or සෛල 2 until the Bluetooth light flashes.
    • Enable Bluetooth on your cell phone and search for available devices.
    • Select "VTech IS8151" from the list. If prompted, enter the PIN (usually 0000).
    • Once paired, the corresponding CELL light on the base unit will turn solid.
  2. ජංගම දුරකථන ඇමතුම් ලබා ගැනීම/ලබා ගැනීම: භාවිතා කරන්න සෛල 1 or සෛල 2 buttons on the handset or base to initiate or answer calls through your paired cell phone.
  3. හඬ සහකාර ප්‍රවේශය: ඔබා අල්ලාගෙන සිටින්න හඬ button on the handset to activate Siri, S Voice, or Google Now on your paired cell phone.
Diagram showing VTech IS8151 connecting to cell phones and landline

Image: An illustration demonstrating how the VTech IS8151 system connects to both cellular and landline services, allowing calls from either source.

ස්මාර්ට් කෝල් බ්ලෝකර්

The Smart Call Blocker helps filter robocalls and unwanted calls. It allows important calls to pass through while blocking nuisance callers.

Close-up of VTech IS8151 handset with Call Block button highlighted

රූපය: සමීප ඡායාරූපයක් view of the VTech IS8151 handset, highlighting the "CALL BLOCK" button for easy identification.

ඩිජිටල් පිළිතුරු පද්ධතිය

The integrated digital answering system records up to 22 minutes of messages, announcements, and memos. A voice guide assists with setup.

VTech IS8151 base unit with answering machine controls and message counter

Image: The VTech IS8151 base unit, showing the digital answering system controls and the LED message counter.

වෙනත් විශේෂාංග

VTech IS8151 showing long range capability with house diagram

Image: A diagram illustrating the VTech IS8151's super long range capability, extending coverage far beyond a typical home.

VTech IS8151 handset and base with large screens and backlit keypad

Image: A close-up of the VTech IS8151 handset and base unit, highlighting their large, easy-to-read screens and backlit keypads.

Man wearing headset connected to VTech IS8151 handset with belt clip

Image: A man using a headset connected to the VTech IS8151 handset, which is attached to his belt with a clip, demonstrating hands-free use and portability.

VTech IS8151 base unit and handset with power backup icon

Image: The VTech IS8151 base unit and handset, with an icon indicating the power backup feature for use during outages.

නඩත්තු කිරීම

දෝෂගවේෂණය

If you experience issues with your VTech IS8151 phone system, try the following common solutions:

For more detailed troubleshooting, please refer to the comprehensive user manual or contact VTech customer support.

පිරිවිතර

වෙළඳ නාමයවීටෙක්
ආදර්ශ අංකයIS8151
නිෂ්පාදන මානයන්අඟල් 9.11 x 6.14 x 7.28
අයිතමයේ බරරාත්තල් 1.8 කි
බැටරි1 නිෂ්පාදන විශේෂිත බැටරියක් අවශ්‍යයි (ඇතුළත්)
දුරකථන වර්ගයරැහැන් රහිත
පිළිතුරු පද්ධති වර්ගයඩිජිටල්
ගැළපෙන උපාංගCell Phones, Bluetooth Headsets
වර්ණයරිදී/කළු
ද්රව්යප්ලාස්ටික්
බලශක්ති ප්රභවයරැහැන්ගත විදුලි
ඩයලර් වර්ගයද්විත්ව යතුරු පුවරුව

වගකීම් තොරතුරු

VTech products are manufactured with high-quality components and are designed to provide reliable performance. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official VTech webවෙබ් අඩවිය. මිලදී ගැනීම පිළිබඳ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

පාරිභෝගික සහාය

If you require assistance with your VTech IS8151 Cordless Phone, please consult the full user manual for comprehensive instructions and advanced features. You can also visit the official VTech support website or contact their customer service department for technical support and service inquiries. Contact information is typically found in the Quick Start Guide or on the VTech webඅඩවිය.