1. හැඳින්වීම
This manual provides detailed instructions for the safe and correct installation and use of the Meliconi Slimstyle Plus 400 S Fixed Wall TV Mount. This mount is designed for televisions ranging from 40 to 82 inches, supporting VESA patterns 200x200, 300x300, and 400x400. It is suitable for installation on both solid walls and plasterboard walls (with specific weight limitations). Please read all instructions carefully before beginning installation.
2 ආරක්ෂිත තොරතුරු
- සියලුම උපදෙස් කියවන්න: Ensure you understand all installation steps and safety warnings before proceeding.
- බර ධාරිතාව: Do not exceed the maximum load capacity of 50 kg (110 lbs) for solid walls or 35 kg (77 lbs) for plasterboard walls.
- රූපවාහිනී ප්රමාණය: This mount is compatible with TVs from 40 to 82 inches.
- VESA අනුකූලතාව: Verify your TV's VESA mounting pattern (distance between mounting holes on the back of the TV) matches 200x200, 300x300, or 400x400 mm.
- බිත්ති වර්ගය: Ensure the wall structure can safely support the combined weight of the mount and your television. If unsure, consult a qualified professional.
- මෙවලම්: ස්ථාපනය අතරතුර සුදුසු මෙවලම් භාවිතා කරන්න සහ ආරක්ෂිත ආම්පන්න පළඳින්න.
- දරුවන්: ස්ථාපන ප්රදේශයෙන් දරුවන් ඈත් කරන්න.
3. පැකේජ අන්තර්ගතය
Carefully unpack the box and ensure all components are present and undamaged. Refer to the image below for typical package contents.
Image 3.1: Meliconi Slimstyle Plus 400 S packaging. The package typically includes the wall plate, TV brackets, mounting hardware (screws, anchors, washers), and an instruction manual.
Typical contents include:
- Wall Plate (main mount component)
- TV Brackets (attach to the back of the TV)
- Mounting Hardware (screws, wall anchors, washers, spacers)
- උපදෙස් අත්පොත
4. නිෂ්පාදන අවසන්view සහ මානයන්
The Meliconi Slimstyle Plus 400 S is a fixed wall mount designed for a sleek, low-profile installation. The mount features the Fast Block locking system for secure TV attachment and EVA foam protectors to safeguard your TV.
Image 4.1: The Meliconi Slimstyle Plus 400 S fixed wall TV mount.
Refer to the technical drawing below for detailed dimensions:
Image 4.2: Technical drawing showing the dimensions of the Meliconi Slimstyle Plus 400 S mount. Maximum width is approximately 40 cm (15.7 inches) and maximum height is approximately 40 cm (15.7 inches) for the TV mounting arms. The mount depth is very slim, approximately 1.5 cm (0.6 inches) without spacers and 3 cm (1.2 inches) with included spacers.
5. ස්ථාපන මාර්ගෝපදේශය
5.1. ඔබ ආරම්භ කිරීමට පෙර
- රූපවාහිනී අනුකූලතාව පරීක්ෂා කරන්න: Confirm your TV's size (40-82 inches) and VESA pattern (200x200, 300x300, or 400x400 mm).
- Determine Wall Type: Identify if your wall is solid (concrete, brick) or plasterboard. This affects the type of anchors and drilling required.
- Locate Studs (for plasterboard): For plasterboard walls, it is crucial to mount the bracket to a vertical wooden or metal stud for maximum security.
- නිෂ්කාශනය: Ensure there are no electrical wires, water pipes, or other obstructions in the drilling area.
5.2. අවශ්ය මෙවලම්
- පැන්සල
- මිනුම් පටිය
- මට්ටම
- සරඹ
- Drill Bits (appropriate for wall type and anchor size)
- ඉස්කුරුප්පු නියනක් (පිලිප්ස් හිස)
- Stud Finder (for plasterboard walls)
5.3. පියවරෙන් පියවර ස්ථාපනය
- රූපවාහිනී වරහන් රූපවාහිනියට අමුණන්න:
- ඔබේ රූපවාහිනී මුහුණ මෘදු, පිරිසිදු මතුපිටක් මත ප්රවේශමෙන් තබන්න.
- Align the TV brackets with the VESA mounting holes on the back of your TV.
- Select the correct screws and washers from the provided hardware kit that fit your TV's mounting holes. Use spacers if necessary to ensure the brackets are flush and cables are not pinched.
- Securely fasten the TV brackets to the TV. Do not overtighten.
- Mark Wall Drilling Positions:
- Determine the desired height for the top of your TV.
- Hold the wall plate against the wall at the desired position. Use a level to ensure it is perfectly horizontal.
- Mark the drilling points through the holes on the wall plate with a pencil.
- සිදුරු සිදුරු:
- Using the appropriate drill bit for your wall type (e.g., masonry bit for concrete, wood bit for studs), drill holes at the marked positions.
- For solid walls, insert the plastic wall anchors into the drilled holes. Tap gently with a hammer if needed until flush with the wall surface.
- For plasterboard walls, ensure you are drilling into a vertical stud. Use appropriate stud-specific anchors if not directly into a stud, but direct stud mounting is highly recommended for safety. The mount is suitable for plasterboard walls with a thickness from 12.5mm to 25mm.
- බිත්ති තහඩුව සවි කිරීම:
- බිත්ති තහඩුව විදින ලද සිදුරු සමඟ පෙළගස්වන්න.
- Insert the mounting screws through the wall plate and into the anchors (for solid walls) or directly into the studs (for plasterboard).
- Tighten all screws firmly until the wall plate is securely fixed to the wall. Do not overtighten.
- බිත්ති තහඩුවේ රූපවාහිනිය එල්ලන්න:
- With assistance, carefully lift the TV (with attached brackets) and hook the TV brackets onto the top edge of the wall plate.
- Gently lower the TV until the brackets fully engage with the wall plate. Ensure the TV is centered and level.
- Secure TV with Fast Block System:
- Locate the Fast Block locking mechanism on the TV brackets.
- Engage the Fast Block system to securely lock the TV to the wall plate. This prevents accidental dislodgement.
- Verify that the TV is firmly attached and cannot be easily lifted off the mount.
6. මෙහෙයුම
Once installed, the Meliconi Slimstyle Plus 400 S is a fixed mount, meaning it does not offer swivel or tilt adjustments beyond any initial slight tilt. The primary operation involves securely attaching and detaching your TV.
- Attaching the TV: As described in the installation steps, hook the TV brackets onto the wall plate and engage the Fast Block locking system.
- Detaching the TV: To remove the TV, disengage the Fast Block locking system. With assistance, carefully lift the TV upwards and away from the wall plate.
7. නඩත්තු කිරීම
- පිරිසිදු කිරීම: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- වරින් වර පරීක්ෂා කිරීම්: Periodically check all screws and connections to ensure they remain tight and secure. Do not overtighten.
- හානිය: If any part of the mount appears damaged, do not use it. Contact customer support for assistance.
8. දෝශ නිරාකරණය
- රූපවාහිනිය මට්ටමේ නැත: Ensure the wall plate was installed perfectly level. If not, you may need to adjust the wall plate's position.
- කන්ද ලිහිල් බවක් දැනේ: Re-check all mounting screws on both the wall plate and the TV brackets. Ensure they are securely tightened. Verify the Fast Block system is engaged. If the wall anchors are loose, professional assistance may be required.
- රූපවාහිනිය නොගැලපේ: Double-check your TV's VESA pattern and weight against the mount's specifications. Ensure you are using the correct screws and spacers.
9. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආදර්ශ අංකය | 480957 |
| අනුකූල රූපවාහිනී ප්රමාණ | 40" සිට 82" දක්වා |
| VESA අනුකූලතාව | 200x200, 300x300, 400x400 mm |
| Maximum Load Capacity (Solid Wall) | 50 kg (රාත්තල් 110) |
| Maximum Load Capacity (Plasterboard Wall) | 35 kg (රාත්තල් 77) |
| සවිකිරීමේ වර්ගය | ස්ථාවර වෝල් කන්ද |
| චලන වර්ගය | ස්ථාවර |
| උපරිම ඇල කෝණය | 12 Degrees (slight downward tilt) |
| ද්රව්ය | ලෝහ |
| වර්ණය | කළු |
| නිෂ්පාදන මානයන් | 0.91 x 18.03 x 4.69 inches (approximate, mount only) |
| අයිතමයේ බර | රාත්තල් 3.74 කි |
10. වගකීම් සහ සහාය
The Meliconi Slimstyle Plus 400 S TV mount is 100% Made in Italy and certified by TÜV SÜD, ensuring high quality and reliability. For specific warranty details, please refer to the documentation included with your purchase or visit the official Meliconi webඅඩවිය.
For technical support, missing parts, or any questions regarding the installation or operation of your Meliconi TV mount, please contact Meliconi customer service through their official webවෙබ් අඩවිය හෝ ඔබේ නිෂ්පාදන ඇසුරුම්වල සපයා ඇති සම්බන්ධතා තොරතුරු.
