SMARTGEN HGM1791 Genset පාලක පරිශීලක අත්පොත

1. නිෂ්පාදන අවසන්view

The SMARTGEN HGM1791 Genset Controller is designed for single unit automation and monitoring control of gensets. It facilitates both manual and automatic start/stop operations based on remote signals. The controller continuously monitors and protects genset operation by collecting and analyzing critical data such as generation voltage, current, water temperature, and oil pressure. It provides fault indications and supports timely maintenance actions. The user interface features an LCD display with Chinese and English language options and intuitive touch-button operation. Parameters and delay values can be adjusted via the front panel or through PC software connected via a USB port.

රූපය 1: Front panel of the SMARTGEN HGM1791 Genset Controller. It features a central LCD screen displaying various parameters like voltage, frequency, current, power, and engine status. Below the screen are three distinct buttons: a red 'Stop' button, a central 'Auto' button with a fan icon, and a green 'Start' button. The text 'AUTO START MODULE' is visible at the bottom.

2 ප්රධාන ලක්ෂණ

• සංදර්ශකය: 128x64 LCD with backlight, supporting Chinese and English interfaces.
• කල්පැවැත්ම: Hard screen acrylic material for screen protection; silicone panel and buttons for enhanced temperature adaptation.
• බල සැපයුම: DC (8~35)V range, compatible with 12V or 24V starting batteries.
• Generator Monitoring: Measures and displays single-phase voltage, ධාරාව, ​​සංඛ්‍යාතය, බලය සහ බර ප්‍රතිශතයtage.
• එන්ජින් අධීක්ෂණය: Precision measurement and display of oil pressure, temperature, fuel level, total running time, battery voltage, engine speed, and accumulated start times.
• ආරක්ෂාව: Integrated genset fault protection and display functions.
• මෙහෙයුම් ආකාර: Three distinct modes: Manual, Auto, and Stop.
• සංවේදක අනුකූලතාව: Compatible with multiple user-defined temperature, pressure, and fuel level sensors.
• Crank Disconnection: Multiple configurable crank disconnection conditions (engine speed sensor, oil pressure, generator frequency).
• ආදාන/ප්‍රතිදාන වරාය: 3 configurable input ports (digital or sensor); 2 fixed relay outputs (fuel, start); 3 configurable output ports (common alarm, preheat, idle control).
• පරාමිති වින්‍යාසය: Parameters can be set and modified via the front panel or PC software (Type-C USB port), with settings retained upon power loss.
• නිර්මාණය: Modular design, self-extinguishing ABS plastic enclosure, pluggable terminal blocks, embedded installation, compact size.

3. පිහිටුවීම

3.1 ස්ථාපනය

The HGM1791 controller is designed for embedded installation. Ensure adequate space for mounting and access to the rear connections. The modular design with pluggable terminal blocks simplifies wiring.

3.2 රැහැන් සම්බන්ධතා

1. බල සැපයුම: Connect the DC (8~35)V power supply to the designated terminals. Ensure correct polarity.
2. Engine Sensors: Connect engine sensors (oil pressure, water temperature, fuel level, speed sensor) to the appropriate input ports. The controller supports various sensor types, which can be user-defined.
3. Generator Connections: Connect the generator voltage, current, and frequency inputs as per the wiring diagram.
4. ප්‍රතිදාන පාලනය කරන්න: Connect the fuel relay, start relay, and configurable output ports (e.g., common alarm, preheat, idle control) to the respective genset components.
5. දුරස්ථ ආරම්භය/නැවැත්වීම: If using remote start functionality, connect the remote start signal to the designated input.

3.3 මූලික වින්‍යාසය

After wiring, power on the controller. Use the front panel buttons or connect to a PC via the Type-C USB port and use the provided software to configure parameters such as sensor types, alarm thresholds, and operational delays. Refer to the detailed wiring diagram and software manual for specific parameter settings.

4. මෙහෙයුම් උපදෙස්

The HGM1791 controller features three primary operating modes: Manual, Auto, and Stop. These modes are selected using the dedicated buttons on the front panel.

4.1 නැවතුම් මාදිලිය

ඔබන්න නවත්වන්න button (red circle icon) to place the controller in Stop mode. In this mode, the genset will shut down if running, and will not start automatically or manually. This mode is typically used for maintenance or when the genset is not required.

4.2 අත්පොත ප්‍රකාරය

ඔබන්න ආරම්භ කරන්න button (green 'I' icon) to initiate a manual start sequence. The genset will attempt to start and run continuously until manually stopped or a fault occurs. This mode is useful for testing or specific operational requirements.

4.3 ස්වයංක්‍රීය ප්‍රකාරය

ඔබන්න ඔටෝ button (fan icon) to activate Auto mode. In this mode, the controller will automatically start and stop the genset based on a remote start signal or other configured conditions. The controller will also monitor the genset and initiate protective shutdowns if faults are detected. This is the typical operating mode for unattended operation.

4.4 සංදර්ශක සංචාලනය

The LCD display shows various genset parameters and status information. Use the navigation buttons (if present, typically arrow keys or similar) to scroll through different screens and view detailed data such as voltage, current, frequency, engine speed, oil pressure, and temperature.

5. නඩත්තු කිරීම

Regular maintenance ensures the longevity and reliable operation of your HGM1791 Genset Controller and the connected genset.

• පිරිසිදු කිරීම: Keep the controller's front panel clean and free from dust and debris. Use a soft, dry cloth. Avoid abrasive cleaners or solvents.
• සම්බන්ධතා: සියලුම රැහැන් සම්බන්ධතා තද බව සහ විඛාදන සලකුණු සඳහා වරින් වර පරීක්ෂා කරන්න. ලිහිල් සම්බන්ධතා නිසා වරින් වර ක්‍රියාත්මක වීමට හෝ දෝෂ ඇති විය හැක.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: නිෂ්පාදකයා පරීක්ෂා කරන්න website for any available firmware updates for the controller. Updates can improve performance or add new features.
• පාරිසරික තත්ත්වයන්: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent damage to the electronic components.
• බැටරි පරීක්ෂාව: Verify the health of the genset's starting batteries, as the controller relies on a stable power supply.

6. දෝශ නිරාකරණය

මෙම කොටස පොදු ගැටළු සඳහා මග පෙන්වීමක් සපයයි. සංකීර්ණ ගැටළු සඳහා, සුදුසුකම් ලත් සේවා පුද්ගලයින් අමතන්න.

6.1 Controller Not Powering On

• බල සැපයුම පරීක්ෂා කරන්න: Verify that the DC power supply (8~35V) is connected correctly and providing the specified voltage.
• ෆියුස් පරීක්ෂාව: Inspect any inline fuses on the power supply line for continuity.
• රැහැන් ඇදීම: Ensure all power wiring connections are secure.

6.2 Genset Fails to Start

• මෙහෙයුම් ආකාරය: Confirm the controller is in Manual or Auto mode.
• Remote Start Signal: In Auto mode, verify that the remote start signal is active.
• එන්ජින් දෝෂ: Check the controller display for any active fault codes (e.g., low oil pressure, high temperature, overspeed). Address the underlying engine issue.
• Fuel/Battery: Ensure adequate fuel supply and a charged starting battery for the genset.
• Crank Disconnection: Verify crank disconnection conditions are correctly configured and not preventing start.

6.3 සාවද්‍ය කියවීම්

• සංවේදක ක්රමාංකනය: Check if sensors are correctly calibrated and configured in the controller's parameters.
• සංවේදක සම්බන්ධතා: Inspect sensor wiring for damage or loose connections.
• සංවේදක වර්ගය: Ensure the correct sensor type is selected in the controller's settings for each input.

7. පිරිවිතර

8. වගකීම් සහ සහාය

Specific warranty details for the SMARTGEN HGM1791 Genset Controller are not provided within the product information. For warranty claims, technical support, or service inquiries, please contact SMARTGEN directly or refer to the documentation included with your purchase. It is recommended to retain your proof of purchase for warranty purposes.