Pulsar 2,400W Portable Gas-Powered Quiet Inverter Generator

හැඳින්වීම

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Pulsar GD240N portable inverter generator. Please read this manual thoroughly before operating the generator to ensure proper usage and longevity of the product.

ප්රධාන ලක්ෂණ:

• 2400W starting watts, 1800W running watts
• Type A & Type C USB ports
• සුපිරි නිහඬ මෙහෙයුම
• Three-in-one switch for simplified control
• Parallel capability to combine with another unit for increased power output
• Enhanced fuel efficiency

ආරක්ෂිත තොරතුරු

අන්තරාය: කාබන් මොනොක්සයිඩ් උවදුර

Using a generator indoors WILL KILL YOU IN MINUTES. Generator exhaust contains poisonous carbon monoxide gas that can cause unconsciousness or DEATH. Operate in well-ventilated, outdoor areas away from open windows or doors. Point exhaust away from occupied areas. Do not run generator in enclosed areas (e.g., not in house or garage). Move to fresh air and get medical help if sick, dizzy, or weak.

Always ensure the generator is placed on a level surface and away from any flammable materials. Keep children and pets away from the operating unit.

පැකේජයේ අන්තර්ගතය

Your Pulsar GD240N generator package includes the following items:

• Pulsar GD240N Portable Inverter Generator
• හිමිකරුගේ අත්පොත
• තෙල් පුනීලය
• Basic Tool Kit (screwdriver)

සැලසුම

එන්ජින් ඔයිල් එකතු කිරීම

Before starting the generator for the first time, you must add engine oil. The generator is shipped without oil.

1. Locate the oil fill cap on the side of the generator.
2. Remove the side panel by unscrewing the two screws.
3. තෙල් පිරවුම් පියන / ඩිප්ස්ටික් ඉවත් කරන්න.
4. Using the provided funnel, carefully add 5W-30 engine oil until it reaches the upper mark on the dipstick. The oil capacity is approximately 0.33 - 0.35 US Quarts (11.2 oz).
5. Replace the oil fill cap and secure the side panel.

Image: Locating the oil fill cap and adding 5W-30 engine oil to the Pulsar GD240N inverter generator.

ඉන්ධන එකතු කිරීම

ඔක්ටේන් ශ්‍රේණිගත කිරීම 87 හෝ ඊට වැඩි නැවුම්, ඊයම් රහිත පෙට්‍රල් පමණක් භාවිතා කරන්න. E85 ඉන්ධන භාවිතා නොකරන්න.

1. උත්පාදක යන්ත්‍රය සමතලා මතුපිටක ඇති බවත් එන්ජිම ක්‍රියා විරහිත කර සිසිල් බවත් සහතික කර ගන්න.
2. ඉන්ධන තොප්පිය ගලවන්න.
3. Carefully fill the fuel tank (capacity 1.18 Gallons) with gasoline, leaving a small air gap at the top to allow for fuel expansion.
4. ඉන්ධන පියන ආරක්ෂිතව ප්‍රතිස්ථාපනය කරන්න.

පාලනය කරයිview

Familiarize yourself with the control panel located on the front of the generator:

• එන්ජිම මාරු: A three-in-one switch for OFF, RUN, and CHOKE positions.
• පරිසර ප්‍රකාර ස්විචය: Activates or deactivates Eco mode for improved fuel efficiency and quieter operation under light loads.
• AC 120V 20A අලෙවිසැල්: Two standard household outlets.
• AC 120V 30A අලෙවිසැල: For higher power demands (e.g., RVs).
• USB Ports: Includes Type A and Type C ports for charging electronic devices.
• DC 12V අලෙවිසැල: For 12-volt DC appliances.
• Circuit Breaker/Reset Button: Resets the circuit in case of an overload.
• Parallel Connection Ports: Allows connection of two compatible generators for increased power.
• දර්ශක පහන්: Displays status for Low Oil, Overload, and Output.

රූපය: විස්තරාත්මක view of the Pulsar GD240N control panel, showing AC outlets, USB ports, DC 12V outlet, and various switches and indicator lights.

මෙහෙයුම් උපදෙස්

Generator ආරම්භ කිරීම

1. උත්පාදක යන්ත්‍රයට ප්‍රමාණවත් තෙල් සහ ඉන්ධන ඇති බවට වග බලා ගන්න.
2. ඉන්ධන කපාටය 'ON' ස්ථානයට හරවන්න.
3. Move the engine switch to the 'CHOKE' position (if the engine is cold).
4. එන්ජිම ආරම්භ වන තුරු රිකොයිල් ආරම්භක හසුරුව තදින් අදින්න.
5. Once the engine starts, gradually move the engine switch to the 'RUN' position.
6. Allow the generator to warm up for a few minutes before connecting electrical loads.

Image: The side of the Pulsar GD240N generator showing the engine switch in the 'RUN' position.

පරිසර මාදිලිය

The Eco Mode switch allows the generator to adjust engine speed based on the load, optimizing fuel consumption and reducing noise levels. For light loads, switch to 'ON' for quieter and more efficient operation. For heavy loads or when starting high-demand appliances, switch to 'OFF' to ensure full power is available.

උපාංග සම්බන්ධ කිරීම

Connect your electrical devices to the appropriate outlets on the control panel. Ensure that the total wattagසම්බන්ධිත උපාංගවල e උත්පාදක යන්ත්‍රයේ ධාවන බලය ඉක්මවා නොයයි.tagඅධික ලෙස පැටවීම වැළැක්වීම සඳහා e (1800W).

සමාන්තර ක්රියාකාරිත්වය

The Pulsar GD240N is equipped with parallel connection ports, allowing you to link two compatible Pulsar inverter generators together to double your power output. Refer to the parallel kit's instruction manual for detailed connection procedures.

නඩත්තු කිරීම

Regular maintenance is crucial for the optimal performance and longevity of your generator. Always ensure the engine is off and cool before performing any maintenance.

එන්ජින් ඔයිල් වෙනස් කිරීම

Change the engine oil after the first 20 hours of use or the first month, whichever comes first. Subsequent oil changes should be performed every 100 hours or every 6 months.

1. තෙල් කාණු ප්ලග් එක යට සුදුසු භාජනයක් තබන්න.
2. Remove the oil drain plug and the oil fill cap to allow the oil to drain completely.
3. Once drained, replace the oil drain plug.
4. Refill with fresh 5W-30 engine oil as described in the 'Adding Engine Oil' section.

Spark Plug Access

The spark plug is accessible for inspection and replacement. Remove the spark plug cover to access the spark plug. Inspect the spark plug for wear and proper gap. Replace if necessary.

Spark Arrestor

The generator is equipped with a spark arrestor, making it US Forestry approved. Regularly inspect and clean the spark arrestor to prevent carbon buildup, which can restrict exhaust flow and affect performance. Refer to the owner's manual for detailed cleaning instructions.

රූපය: පසුපස view of the Pulsar GD240N generator, highlighting the exhaust port and spark arrestor.

දෝෂගවේෂණය

If your generator experiences issues, consult the following common troubleshooting tips:

දර්ශක පහන්

• අඩු තෙල් ආලෝකය: If illuminated, check and add engine oil. The generator may shut down automatically to prevent engine damage.
• අධි බර ආලෝකය: If illuminated, the generator is overloaded. Disconnect some devices and press the reset button.
• නිමැවුම් ආලෝකය: A green light indicates normal power output.

පොදු ගැටළු

• එන්ජිම ආරම්භ නොවේ: Check fuel level, oil level, spark plug, and ensure the engine switch is in the correct position.
• බල ප්‍රතිදානයක් නැත: Check for tripped circuit breakers, ensure the generator is not overloaded, and verify all connections.

පිරිවිතර

වගකීම් සහ සහාය

වගකීම් තොරතුරු

This Pulsar GD240N inverter generator comes with a 2-Year Manufacturer's Warranty. Please retain your proof of purchase for warranty claims.

පාරිභෝගික සහාය

For technical assistance, warranty inquiries, or to order replacement parts, please contact Pulsar Products customer support. Refer to the official Pulsar webසම්බන්ධතා විස්තර සඳහා වෙබ් අඩවිය හෝ ඔබේ මිලදී ගැනීමේ ලියකියවිලි.