1. හැඳින්වීම
This manual provides detailed instructions for the safe and efficient use of your Rongta RPP30 Portable Bluetooth Thermal Printer. Please read this manual thoroughly before operating the device and keep it for future reference. The RPP30 is a compact and versatile thermal printer designed for mobile printing applications, offering both Bluetooth and USB connectivity.
2. නිෂ්පාදන අවසන්view
The Rongta RPP30 is a portable thermal printer capable of printing on 80mm wide thermal paper. It features a compact design, a built-in battery, and multiple connectivity options for convenience.
2.1 පැකේජයේ අන්තර්ගතය
ඇසුරුම් ඉවත් කිරීමෙන් පසු, සියලුම අයිතම ඇති බවට වග බලා ගන්න:
- Rongta RPP30 Portable Thermal Printer
- USB කේබලය
- බල ඇඩැප්ටරය
- Battery (may be pre-installed)
- Thermal Paper Roll (starter roll)
- පරිශීලක අත්පොත (මෙම ලේඛනය)
Image: The Rongta RPP30 printer shown with its included accessories: a USB cable, a power adapter, and a starter thermal paper roll.
2.2 මුද්රණ යන්ත්ර සංරචක
Familiarize yourself with the main parts of your printer:
රූපය: කෝණික view of the Rongta RPP30 printer, highlighting its compact design, front display, and control buttons.
- බල බොත්තම: මුද්රණ යන්ත්රය සක්රිය හෝ අක්රිය කිරීමට භාවිතා කරයි.
- පෝෂක බොත්තම: කඩදාසි අතින් ඉදිරියට ගෙන යයි.
- තත්ව දර්ශක: LEDs or display for power, battery, and error status.
- කඩදාසි මැදිරිය: Area for loading thermal paper rolls.
- USB Port: පරිගණකයක් ආරෝපණය කිරීම සහ සම්බන්ධ කිරීම සඳහා.
- බල ආදානය: Connects to the power adapter for charging.
3. පිහිටුවීම
3.1 බැටරිය ආරෝපණය කිරීම
- බල ඇඩැප්ටරය මුද්රණ යන්ත්රයේ බල ආදාන තොටට සම්බන්ධ කරන්න.
- බල ඇඩැප්ටරය සුදුසු බිත්ති අලෙවිසැලකට සම්බන්ධ කරන්න.
- The charging indicator light will illuminate. Allow the printer to charge fully before its initial use (typically 2-3 hours).
3.2 තාප කඩදාසි පැටවීම
- Open the paper compartment cover. This is usually done by pressing a release button or latch located on the side or top of the printer.
- Insert a new thermal paper roll into the compartment. Ensure the paper feeds from the bottom of the roll and the leading edge is straight.
- කැපුම් දාරය හරහා කඩදාසි කුඩා ප්රමාණයක් ඇද දමන්න.
- Close the paper compartment cover firmly until it clicks securely into place.
Image: The Rongta RPP30 printer with its top cover open, revealing the internal mechanism for loading a thermal paper roll. The orange lever indicates the release mechanism.
3.3 ධාවක ස්ථාපනය (USB සම්බන්ධතාවය සඳහා)
For printing via USB from a computer, you may need to install the appropriate printer driver. Drivers are typically provided on a CD included with the printer or can be downloaded from the official Rongta website. Follow the on-screen instructions during the installation process.
3.4 බ්ලූටූත් යුගල කිරීම
- Ensure the printer is powered on and within range of your mobile device.
- On your mobile device (smartphone, tablet), navigate to the Bluetooth settings menu.
- Initiate a search for available devices. The printer will typically appear as "RPP30" or a similar identifier.
- Select the printer from the list to begin the pairing process. If prompted for a PIN, enter "0000" or "1234" (these are common default PINs).
- Once successfully paired, the printer is ready for Bluetooth printing.
4. මෙහෙයුම් උපදෙස්
4.1 බල ගැන්වීම සක්රිය / අක්රිය කිරීම
- බල ගැන්වීමට: ඔබා අල්ලාගෙන සිටින්න බල බොත්තම for a few seconds until the power indicator light illuminates.
- බලය අක්රිය කිරීමට: ඔබා අල්ලාගෙන සිටින්න බල බොත්තම again until the power indicator light turns off.
4.2 Printing via Bluetooth
- Ensure the printer is powered on and successfully paired with your mobile device.
- Open the printing application on your mobile device (e.g., POS software, label printing app).
- Within the application's settings, select the Rongta RPP30 as the target printer.
- Initiate the print command from your application.
4.3 USB හරහා මුද්රණය කිරීම
- ලබා දී ඇති USB කේබලය භාවිතයෙන් ඔබේ පරිගණකයට මුද්රණ යන්ත්රය සම්බන්ධ කරන්න.
- Verify that the printer drivers are correctly installed on your computer.
- ඔබේ පරිගණකයෙන් මුද්රණය කිරීමට අවශ්ය ලේඛනය හෝ යෙදුම විවෘත කරන්න.
- Select the Rongta RPP30 from your list of available printers and send the print job.
5. නඩත්තු කිරීම
5.1 මුද්රණ ශීර්ෂය පිරිසිදු කිරීම
To maintain optimal print quality, it is recommended to clean the print head regularly, especially if printouts appear faded, unclear, or have streaks.
- Turn off the printer and disconnect the power adapter to prevent accidental operation.
- කඩදාසි මැදිරි කවරය විවෘත කරන්න.
- Gently wipe the thermal print head (the dark strip located inside the compartment) with a cotton swab lightly dampඅයිසොප්රොපයිල් මධ්යසාර සමඟ එකතු කර ඇත.
- Allow the print head to dry completely for a few minutes before closing the cover and powering on the printer.
5.2 බැටරි සත්කාර
- Charge the battery fully before its first use to optimize battery life.
- Avoid completely discharging the battery frequently, as this can reduce its lifespan.
- If the printer will be stored for an extended period, charge the battery to approximately 50% and store it in a cool, dry place. Recharge the battery every 3-6 months to prevent deep discharge.
- Always use only the original or manufacturer-approved power adapter and battery to prevent damage.
5.3 කඩදාසි හැසිරවීම
- Use high-quality thermal paper specifically designed for thermal printers to ensure optimal print results and prolong the life of the print head.
- Store thermal paper in a cool, dry place, away from direct sunlight, heat, and moisture, which can degrade its quality.
- Avoid using wrinkled, creased, or damaged paper, as this can lead to paper jams or poor print quality.
6. දෝශ නිරාකරණය
6.1 පොදු ගැටළු සහ විසඳුම්
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| මුද්රණ යන්ත්රය ක්රියාත්මක නොවේ. | බැටරිය අඩුයි හෝ බල සම්බන්ධතාවයක් නැහැ. | Charge the battery using the provided power adapter or ensure the adapter is securely connected to a working outlet. Verify the power button is pressed correctly. |
| මුද්රණ ප්රතිදානයක් නොමැත. | No paper, paper loaded incorrectly, or connectivity issue. | Check the paper roll and reload it if necessary, ensuring it's correctly positioned. Verify Bluetooth pairing or USB cable connection. Confirm the printer is selected in your printing software. |
| Faded or blank printouts. | Dirty print head, thermal paper loaded upside down, or low-quality paper. | Clean the print head as described in the Maintenance section. Ensure the thermal paper is loaded with the thermal (printable) side facing the print head. Use recommended thermal paper. |
| බ්ලූටූත් යුගලනය අසමත් වේ. | Printer not in pairing mode, incorrect PIN, or wireless interference. | Ensure the printer is powered on and discoverable. Re-enter the default PIN (0000 or 1234). Try pairing in a location with less wireless interference. Restart both the printer and your mobile device. |
| කඩදාසි තදබදය. | Improper paper loading, use of damaged paper, or a foreign object. | Turn off the printer immediately. Open the paper compartment and carefully remove any jammed paper or obstructions. Reload paper correctly, ensuring it is smooth and undamaged. |
7. පිරිවිතර
Technical specifications for the Rongta RPP30 Portable Bluetooth Thermal Printer:
| විශේෂාංගය | විස්තර |
|---|---|
| මාදිලියේ නම | ආර්පීපී 30 |
| මුද්රණ තාක්ෂණය | තාප |
| සම්බන්ධතා තාක්ෂණය | USB, බ්ලූටූත් |
| මුද්රක ප්රතිදානය | ඒකවර්ණ |
| උපරිම මුද්රණ වේගය (කළු සහ සුදු) | 150 mm/s |
| කඩදාසි පළල | 80 මි.මී |
| උපරිම මුද්රණ පළල | 75 මි.මී |
| ද්විත්ව මුද්රණය | නැත |
| වර්ණ ගැඹුර | 1 bit per pixel |
| නිෂ්පාදන මානයන් (D x W x H) | 12 x 10.6 x 6.3 සෙ.මී |
| අයිතමයේ බර | ග්රෑම් 210 කි |
| ඇතුළත් සංරචක | Printer, USB Cable, Power Adapter, Battery, Thermal Paper Roll (starter) |
8. වගකීම් සහ සහාය
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product packaging or visit the official Rongta website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Rongta customer service through their official channels.
Note: Warranty terms may vary by region and retailer. Always retain your proof of purchase for warranty claims.
