ZOVII Solid Alarm Chain Lock ZCL8-120 User Manual

1. හැඳින්වීම

Thank you for choosing the ZOVII Solid Alarm Chain Lock Series ZCL8-120. This robust and durable security solution is designed to provide superior protection for your motorcycles and bicycles. Featuring an alloy steel electronic lock body, an 8mm carbide-reinforced steel chain, and a powerful 120dB anti-theft alarm, this lock offers an impenetrable defense against various forceful attempts. This manual will guide you through the proper setup, operation, and maintenance of your new chain lock.

Image: The ZOVII Solid Alarm Chain Lock ZCL8-120, showcasing its robust design and integrated alarm system.

2 ආරක්ෂිත තොරතුරු

• Always ensure the lock is properly engaged and secured before leaving your vehicle unattended.
• Keep keys in a safe place and away from the lock. Do not store spare keys on the vehicle.
• The alarm is loud (120dB). Avoid prolonged exposure to the alarm sound to prevent hearing damage.
• Do not attempt to disassemble the electronic components beyond battery replacement, as this may void the warranty and cause damage.
• භාවිතා කරන ලද බැටරි දේශීය රෙගුලාසිවලට අනුව වගකීමෙන් යුතුව බැහැර කරන්න.
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.

3. පැකේජ අන්තර්ගතය

පැකේජය විවෘත කිරීමෙන් පසු, කරුණාකර සියලුම සංරචක තිබේදැයි තහවුරු කරගන්න:

• 1 x ZOVII Solid Alarm Chain Lock (ZCL8-120)
• 3 x යතුරු
• 1 x ඇලන් කී
• 1 x Nylon Sleeve Bag
• 1 x CR2 බැටරිය (ඇතුළත්)

Image: All items included in the ZOVII Solid Alarm Chain Lock package, including the lock, keys, and tools.

4. සැකසුම සහ බැටරි ස්ථාපනය

Your ZOVII Alarm Chain Lock comes with a CR2 battery pre-installed. However, if you need to replace the battery or ensure it's correctly seated, follow these steps:

1. Unlock the chain lock using one of the provided keys.
2. Locate the small hex screw inside the lock head. Use the provided Allen key to loosen this screw.
3. Carefully take out the battery compartment.
4. Open the waterproof lid of the battery compartment.
5. Install the CR2 lithium battery, ensuring correct polarity.
6. Reassemble the parts: close the waterproof lid, insert the battery compartment back into the lock head, and tighten the hex screw with the Allen key.
7. Once the battery is installed, the lock will emit a short beep, indicating it's ready for use.

5. මෙහෙයුම් උපදෙස්

5.1. Locking the Chain Lock

To secure your motorcycle or bicycle:

1. Wrap the 1200mm steel chain around your vehicle's frame and a secure, immovable object (e.g., a bike rack, lampතනතුර).
2. Insert the end of the chain into the lock body. Ensure it clicks firmly into place.
3. The lock will emit a single beep, indicating it is locked and the alarm is armed.

Image: The ZOVII Alarm Chain Lock securely fastened around a bicycle frame and a fixed object.

5.2. අනතුරු ඇඟවීමේ ක්‍රියාකාරිත්වය

The built-in 120dB anti-theft security alarm is designed to deter theft. Once armed, any significant vibration or attempt to tamper with the lock will trigger the alarm. The alarm will sound for approximately 10-15 seconds and then re-arm itself if the disturbance ceases. Repeated tampering will cause the alarm to sound continuously.

Image: Graphic highlighting the 120dB alarm feature and its effectiveness.

5.3. Unlocking the Chain Lock

To unlock the chain lock and disarm the alarm:

1. Insert the key into the keyhole on the lock body.
2. Turn the key to unlock. This action will disarm the alarm and allow you to remove the chain.

6. නඩත්තු කිරීම

• බැටරි ආදේශනය: Replace the CR2 battery when the alarm sound becomes weak or the lock fails to arm. Refer to Section 4 for detailed battery replacement instructions.
• පිරිසිදු කිරීම: The lock body and chain can be wiped clean with a damp cloth. The nylon cover protects your bike's paintwork and can also be cleaned as needed.
• විඛාදන ප්රතිරෝධය: The lock incorporates specialized materials and coatings for exceptional corrosion resistance. While it is IP67 rated for water and dust ingress, it is recommended to wipe it dry after exposure to heavy rain or moisture to prolong its lifespan.
• යතුරු සිදුරු නඩත්තුව: Periodically apply a small amount of graphite lubricant to the keyhole to ensure smooth operation. Avoid using oil-based lubricants.

Image: The ZOVII Chain Lock, highlighting its model number ZCL08 and key features.

7. දෝශ නිරාකරණය

8. පිරිවිතර

• ආකෘතිය: ZCL8-120 (Item model number: ZCL08)
• Chain Material: 8mm Carbide-reinforced steel
• Lock Body Material: ඇලෝයි වානේ
• දාම දිග: 1200mm (120 cm)
• අනතුරු ඇඟවීමේ ශබ්දය: 120dB
• ජල ආරක්ෂිත ශ්රේණිගත කිරීම: IP67
• බැටරි වර්ගය: 1 x CR2 Lithium Battery (included)
• නිෂ්පාදන මානයන්: 119.99 x 2.54 x 2.54 cm (approx. 120 x 2.5 x 2.5 Centimetres)
• අයිතමයේ බර: කිලෝ ග්රෑම් 1.62 කි
• විශේෂ ලක්ෂණ: Anti-Drill, Anti-Corrosion, Alarm, Cut Resistant
• නිර්දේශිත භාවිතයන්: Motorcycles and bicycles

Image: Diagram illustrating the dimensions of the ZOVII Chain Lock, including chain diameter and length.

9. වගකීම් සහ සහාය

ZOVII stands behind the quality of its products. For warranty information, technical support, or any inquiries regarding your Solid Alarm Chain Lock, please contact ZOVII customer service through the retailer where you purchased the product or visit the official ZOVII webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

වැඩි විස්තර සඳහා පිවිසෙන්න ZOVII Store on Amazon.