HZXVOGEN HVM140 3-in-1 Multi-Process Welder User Manual

1. වැදගත් ආරක්ෂක උපදෙස්

Always read and understand all safety warnings and instructions before operating this welding machine. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

• විදුලි කම්පනයෙන් මරණයට පත්විය හැක්කේ: Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Insulate yourself from work and ground.
• දුම සහ වායූන් භයානක විය හැකිය: ඔබේ හිස දුම් වලින් ඈත් කර තබන්න. හුස්ම ගැනීමේ කලාපයෙන් දුම් ඉවත් කිරීමට වාතාශ්‍රය හෝ පිටාරය භාවිතා කරන්න.
• චාප කිරණ ඇස් සහ සම පිළිස්සීමට හේතු විය හැක: Wear a welding helmet with a proper shade of filter to protect your face and eyes when welding or watching. Wear appropriate protective clothing to protect your skin.
• ගිනි හා පිපිරුම් උවදුර: Protect yourself and others from flying sparks and hot metal. Remove all flammables within 35 feet (10 meters) of the welding area.
• උණුසුම් කොටස් දරුණු පිළිස්සුම් ඇති කළ හැක: වෑල්ඩින් කරන ලද ද්‍රව්‍ය ස්පර්ශ කිරීමට පෙර සිසිලන කාලයට ඉඩ දෙන්න.
• Overcurrent, Overvoltage, Overheating Protection: The machine is equipped with built-in protection. If activated, allow the machine to cool down before resuming operation.

For detailed safety information, refer to relevant industry standards and local regulations.

2. පැකේජ අන්තර්ගතය

Carefully unpack the welding machine and check for any damage. Ensure all items listed below are present:

Figure 2.1: HVM140 Welder and Included Accessories

This image displays the HZXVOGEN HVM140 welding machine along with its complete set of accessories, including the MIG torch, electrode holder, earth clamp, flux core wire, brush hammer, and welding rods.

• HZXVOGEN HVM140 Welding Machine (1 unit)
• MIG Torch (1 unit)
• Electrode Holder (1 unit)
• පෘථිවිය Clamp (ඒකක 1)
• Flux Core Wire (0.8mm or 1.0mm, 1 spool)
• Brush Hammer (1 unit)
• Welding Rods (5 pieces)
• පරිශීලක අත්පොත (පිටපත් 1)

3. නිෂ්පාදන අවසන්view

The HZXVOGEN HVM140 is a versatile 3-in-1 multi-process inverter welding machine designed for various welding applications. It supports Gasless MIG, MMA (Stick), and Lift TIG welding modes.

3.1 ප්රධාන ලක්ෂණ

Figure 3.1: 3-in-1 Multi-Process Capabilities

This image highlights the HVM140's ability to perform Gasless MIG, MMA (Stick), and Lift TIG welding, showcasing its versatility for different welding tasks.

• 3-in-1 Multi-Process: Supports Gasless MIG, MMA (Stick), and Lift TIG welding modes.
• IGBT Inverter Technology: Provides stable arc, high efficiency, and energy saving.
• Digital Rotating Screen: Intuitive one-button control for easy and quick adjustment of welding parameters.
• වීආර්ඩී (වෙළුමtagඊ අඩු කිරීමේ උපකරණය): Enhances safety, especially in MMA mode, by reducing open-circuit voltage.
• උණුසුම් ආරම්භය: Improves arc ignition in MMA mode, preventing electrode sticking.
• ප්‍රති-ස්ටික්: Automatically reduces current if the electrode sticks, making it easier to remove.
• චාප බලය: Provides additional current during short arc length, preventing the arc from extinguishing.
• කාර්යක්ෂම සිසිලන විදුලි පංකාව: Reduces internal dust accumulation and prolongs machine lifespan.
• අතේ ගෙන යා හැකි සහ සංයුක්ත: Lightweight design (approx. 3.7 kg) with a convenient handle for easy transport.

Figure 3.2: Digital Control Interface

This image shows the digital display and single knob control of the HVM140, allowing for precise and easy adjustment of welding parameters.

Figure 3.3: Professional Welder Features

This image visually represents the advanced features of the HVM140, including IGBT technology, VRD, Hot Start, efficient cooling, Anti-Stick, and Arc Force, contributing to professional welding performance.

4. පිහිටුවීම

4.1 මූලික පරීක්ෂාව

Before connecting the machine, inspect all cables, connections, and the machine casing for any signs of damage. Ensure the work area is clean, dry, and well-ventilated, free from flammable materials.

4.2 බල සම්බන්ධතාවය

• යන්ත්‍රයේ බල ස්විචය "OFF" ස්ථානයේ ඇති බවට වග බලා ගන්න.
• Connect the power cord to a suitable power outlet. The HVM140 supports a range of input voltages (refer to specifications for details).

4.3 Gasless MIG Setup

1. වයර් පෝෂක ආවරණය විවෘත කරන්න.
2. Install the flux core wire spool onto the spindle. Ensure the wire unwinds smoothly.
3. Thread the wire through the wire feeder mechanism and into the MIG torch liner.
4. Close the wire feeder cover.
5. Connect the MIG torch to the designated MIG output terminal on the front panel.
6. පෘථිවිය සම්බන්ධ කරන්න clamp to the work piece. Ensure a good electrical connection.
7. Turn on the machine. Press and hold the wire feed button (usually on the front panel or torch trigger) for approximately 5 seconds to feed the wire through the torch until it exits the contact tip.

රූපය 4.1: වයර් පෝෂණ යාන්ත්‍රණය

This diagram illustrates the internal wire feeding system of the HVM140, detailing how to install the flux core wire spool and feed the wire into the MIG torch for operation.

4.4 MMA (Stick) Setup

1. Connect the electrode holder cable to the positive (+) terminal on the front panel.
2. පෘථිවිය සම්බන්ධ කරන්න clamp ඉදිරිපස පුවරුවේ සෘණ (-) පර්යන්තයට කේබලය.
3. Securely insert the welding electrode into the electrode holder.
4. පෘථිවිය සම්බන්ධ කරන්න clamp වැඩ කොටස වෙත.

4.5 Lift TIG Setup

1. Connect the TIG torch (not included) to the negative (-) terminal on the front panel.
2. පෘථිවිය සම්බන්ධ කරන්න clamp cable to the positive (+) terminal on the front panel.
3. TIG පන්දමෙහි සුදුසු ටංස්ටන් ඉලෙක්ට්‍රෝඩයක් සවි කර ඇති බවට වග බලා ගන්න.
4. පෘථිවිය සම්බන්ධ කරන්න clamp වැඩ කොටස වෙත.
5. Note: This machine supports Lift TIG, which means arc initiation is done by touching the tungsten to the workpiece and lifting it slightly. No high-frequency start.

5. මෙහෙයුම් උපදෙස්

5.1 මාදිලිය තේරීම

Turn on the machine. Use the mode selection button (usually near the digital display) to cycle through MIG, MMA, and Lift TIG modes. The selected mode will be indicated on the digital screen.

5.2 වත්මන් ගැලපීම

Once the desired mode is selected, use the single control knob to adjust the welding current (Amperage). The digital display will show the current setting. Refer to welding charts for recommended current settings based on material thickness and welding process.

5.3 වෙල්ඩින් ශිල්පීය ක්‍රම

Proper welding technique is crucial for quality welds. Practice on scrap material before welding critical components.

• MIG වෙල්ඩින්: Maintain a consistent stick-out and travel speed. Use a slight push or pull angle depending on the application.
• ඵම්එම්ඒ වෙල්ඩින්: Maintain a short arc length. Use a slight weaving motion for wider beads.
• ලිෆ්ට් TIG වෙල්ඩින්: Touch the tungsten to the workpiece to initiate the arc, then quickly lift it a small distance (1-3mm) to establish the arc. Maintain a consistent arc length and travel speed.

5.4 රාජකාරි චක්රය

The HVM140 has a 60% duty cycle at its maximum output. This means it can operate continuously for 6 minutes out of every 10-minute period at maximum current before requiring a 4-minute cooling period. Exceeding the duty cycle can damage the machine. The machine's built-in thermal protection will activate if it overheats.

Figure 5.1: Duty Cycle Explanation

This graphic explains the 60% duty cycle of the HVM140, indicating that for every 10 minutes of operation at maximum output, the machine can work for 6 minutes and requires a 4-minute break to cool down.

6. නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ඔබේ වෙල්ඩින් යන්ත්‍රයේ ආයු කාලය සහ ප්‍රශස්ත ක්‍රියාකාරිත්වය සහතික කරයි.

• පිරිසිදු කිරීම: Regularly clean the machine's exterior with a dry cloth. Use compressed air to blow out dust from the cooling vents. Ensure the machine is unplugged before cleaning.
• කේබල් පරීක්ෂාව: Periodically inspect all cables (power, MIG torch, electrode holder, earth clamp) for cuts, abrasions, or loose connections. Replace damaged cables immediately.
• MIG පන්දම නඩත්තු කිරීම: Clean the contact tip and gas nozzle regularly. Replace worn contact tips and diffusers.
• වයර් පෝෂකය: Keep the wire feeder rollers clean and free of debris. Ensure proper tension on the wire spool.
• ගබඩා: භාවිතයේ නොමැති විට යන්ත්‍රය පිරිසිදු, වියලි සහ දූවිලි රහිත පරිසරයක ගබඩා කරන්න.

7. දෝශ නිරාකරණය

මෙම කොටසින් ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සඳහා විසඳුම් සපයයි. මෙහි ලැයිස්තුගත කර නොමැති ගැටළු සඳහා, පාරිභෝගික සහාය අමතන්න.

8. පිරිවිතර

Technical specifications for the HZXVOGEN HVM140 welding machine:

Figure 8.1: Portable and Compact Design

This image provides a visual representation of the HVM140's compact dimensions and lightweight design, emphasizing its portability for various work environments.

9. වගකීම් සහ සහාය

HZXVOGEN is committed to providing high-quality products and excellent customer service.

• වගකීම්: This product comes with a 3-Year Extended Warranty. Please retain your proof of purchase for warranty claims.
• පාරිභෝගික සහාය: For any questions, technical assistance, or warranty inquiries, please contact HZXVOGEN customer support. Our team is available 24/7 to assist you.
• සබඳතා තොරතුරු: Refer to the contact details provided on the product packaging or the official HZXVOGEN webඅඩවිය.

රූපය 9.1: වගකීම් සහ සහාය තොරතුරු

This image confirms the product's certifications (DEELAY, UL), the availability of a 3-Year Extended Warranty, and 24/7 customer support, ensuring reliability and assistance.