1. හැඳින්වීම
Welcome to the world of high-fidelity audio with your new Pro-Ject Debut EVO 2 Audiophile Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. Please read it thoroughly before first use.
The Debut EVO 2 features a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge, designed for exceptional sound reproduction.
2. පිහිටුවීම
හොඳම ශබ්ද ගුණාත්මකභාවය සඳහා සහ ඔබේ හැරවුම් මේසයට සහ වාර්තා වලට හානි වීම වැළැක්වීම සඳහා නිසි සැකසුම ඉතා වැදගත් වේ.
2.1 ඇසිරීම සහ ස්ථානගත කිරීම
Carefully remove all components from the packaging. Retain the original packaging for future transport or service. Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and vibrations.
Figure 2.1: Pro-Ject Debut EVO 2 Turntable with dust cover. Ensure the turntable is placed on a stable, level surface.
2.2 තහඩු සහ පටි සවි කිරීම
- Place the main platter onto the spindle.
- Locate the drive belt. Carefully stretch the belt around the motor pulley and the sub-platter rim.
රූපය 2.2: සමීප රූපය view of the sub-platter and belt drive system. The belt connects the motor pulley to the sub-platter for rotation.
2.3 Tonearm and Cartridge Setup
The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps for tonearm setup:
- ප්රති බර ගැලපීම: Gently push the counterweight onto the rear of the tonearm. With the anti-skating weight removed, balance the tonearm so it floats freely and horizontally. Lock the tonearm in its rest.
- Tracking Force Setting: Rotate the tracking force scale ring to '0' while holding the counterweight steady. Then, rotate the counterweight (and scale ring) counter-clockwise until the desired tracking force (typically 1.8g for the Pick it MM EVO) is indicated.
- ස්කේටිං විරෝධී ගැලපීම: Attach the anti-skating weight to the small groove on the anti-skating stub. The recommended setting for the Pick it MM EVO cartridge is the second groove from the tonearm pivot.
Figure 2.3: Detail of the carbon fiber tonearm, showing the counterweight and anti-skating weight. These components are critical for proper cartridge tracking.
Figure 2.4: The pre-mounted Pick it MM EVO cartridge on the tonearm. This cartridge is designed to deliver lively and robust sound.
2.4 සම්බන්ධතා
Connect the supplied phono cable to the RCA output jacks on the rear of the turntable and to the phono input (or line input via a phono preamplifier) of your amplifier. Ensure the ground wire is connected to the ground terminal on your ampහම් අවම කිරීමට ලිෆයර්.
Connect the power adapter to the turntable's power input and then to a suitable wall outlet.
Figure 2.5: Rear panel of the turntable with RCA output jacks and ground terminal. Proper connection to an amplifier is essential for audio output.
3. මෙහෙයුම් උපදෙස්
This section details the steps for playing records and using the turntable's features.
3.1 Power On and Speed Selection
Press the power button to turn on the turntable. The Debut EVO 2 features electronic speed selection. Use the speed selector switch (usually located on the plinth) to choose between 33 1/3 RPM, 45 RPM, or 78 RPM (requires a different belt and stylus, sold separately).
Video 3.1: Pro-Ject Debut Evo 2 Introduction. This video provides a visual overview of the turntable's features and operation.
3.2 වාර්තාවක් වාදනය කිරීම
- තැටිය මත වාර්තාවක් තබන්න.
- Select the correct playback speed (33 1/3 or 45 RPM).
- කියුයිං ලීවරය භාවිතයෙන් ටෝනියර්ම් එක ඔසවන්න.
- Carefully position the stylus over the lead-in groove of the record.
- Lower the tonearm gently using the cueing lever. The stylus will descend onto the record and begin playback.
රූපය 3.1: ඉහළ-පහළ view of the turntable during record playback. The tonearm is positioned over the record.
3.3 නැවත ධාවනය නැවැත්වීම
- කියුයිං ලීවරය භාවිතයෙන් ටෝනියර්ම් එක ඔසවන්න.
- Return the tonearm to its rest and secure it with the tonearm clip.
- Turn off the turntable by pressing the power button.
4. නඩත්තු කිරීම
Regular maintenance ensures the longevity and optimal performance of your turntable.
4.1 හැරවුම් මේසය පිරිසිදු කිරීම
- දූවිලි ආවරණය: Clean the dust cover with a soft, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන්ගෙන් වළකින්න.
- Plinth and Platter: Use a soft, lint-free cloth to wipe the plinth and platter. For stubborn marks, a slightly damp රෙදි භාවිතා කළ හැකි අතර, පසුව වියළි එකක් භාවිතා කළ හැකිය.
- ස්ටයිලස්: Use a dedicated stylus cleaning brush or fluid to gently clean the stylus. Always brush from back to front.
4.2 Belt Replacement
The drive belt may stretch or degrade over time. If you notice inconsistent speed or reduced performance, the belt may need replacement. Contact Pro-Ject support or an authorized dealer for a replacement belt.
5. දෝශ නිරාකරණය
This section addresses common issues you might encounter with your turntable.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| බලය නැත | Power cable not connected; faulty power outlet | Check power connections; try a different outlet |
| නාලිකා එකකින් හෝ දෙකකින් ශබ්දයක් නැත | Incorrect cable connection; damaged cartridge/stylus; amplifier input issue | Check RCA connections; ensure ground wire is connected; inspect stylus for damage; test amplifier with another source |
| හම්මිං ශබ්දය | Ground wire not connected; proximity to other electronics; faulty cables | Ensure ground wire is securely connected; move turntable away from other devices; try different cables |
| නොගැලපෙන වේගය | Worn or stretched drive belt; motor issue | Replace drive belt; contact support if issue persists |
| මඟ හැරීම හෝ විකෘති වූ ශබ්දය | Incorrect tracking force/anti-skating; dirty stylus; damaged record | Re-adjust tracking force and anti-skating; clean stylus; inspect record for damage |
6. පිරිවිතර
Key technical specifications for the Pro-Ject Debut EVO 2 Turntable.
- ආකෘතිය: මංගල EVO 2
- අයිතම ආදර්ශ අංකය: 9120129864978
- වෙළඳ නාමය: Pro-Ject
- නිෂ්පාදන මානයන්: 16.4 x 12.6 x 4.5 අඟල් (41.66 x 32.00 x 11.43 cm)
- අයිතමයේ බර: රාත්තල් 13.2 (කිලෝ ග්රෑම් 6)
- තැටි ද්රව්ය: Damped Aluminum (1.7kg, anti-magnetic)
- ටෝනර්ම්: කාබන් ෆයිබර්
- කාට්රිජ්: Pick it MM EVO (pre-mounted)
- වේගය: 33 1/3, 45 RPM (78 RPM with optional belt/stylus)
- සම්බන්ධතා තාක්ෂණය: Auxiliary (RCA outputs)
- ඇතුළත් සංරචක: Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter.
- විශේෂ ලක්ෂණ: Carbon Fiber Tonearm, Damped Aluminum Platter, High-Quality Cartridge, Electronic Speed Selection, 25-Year Spare Parts Guarantee.
7. වගකීම් තොරතුරු
Pro-Ject Audio Systems offers a 25-year spare parts availability guarantee for this turntable, ensuring long-term support for your product. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject webඅඩවිය.
ආරක්ෂණ සැලසුම් මිලදී ගැනීම සඳහා ද තිබේ:
- අවුරුදු 2ක ආරක්ෂණ සැලැස්ම
- අවුරුදු 3ක ආරක්ෂණ සැලැස්ම
- සම්පූර්ණ ආරක්ෂාව (මාසික සැලැස්ම)
8. සහාය සහ සම්බන්ධතා
For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webආධාරක සම්පත් සඳහා අඩවිය.
ඔබට ද නැරඹිය හැකිය Pro-Ject Store on Amazon අමතර නිෂ්පාදන තොරතුරු සහ උපාංග සඳහා.
