1. ඉවරයිview
The TOPPING E2X2 is a high-performance USB audio interface designed for recording and mixing on various platforms including PC, Mac, iPhone, and Android devices. It features an ultra-linear microphone preamp, 48V phantom power, low-noise circuitry, and real-time monitoring capabilities, making it suitable for music production and podcasting.
ප්රධාන ලක්ෂණ
- Ultra-Linear Microphone Preamp: Equipped with a self-developed preamp module, offering an Equivalent Input Noise (EIN) as low as -130.5dBu for minimal background noise.
- 48V ෆැන්ටම් බලය: Supports both condenser and dynamic microphones.
- Low Noise Reference Voltage Module (LNRD): Provides a stable power supply for the AD/DA chip, ensuring pure audio transmission with high Input DNR (ADC) of 118dB and Output DNR (DAC) of 115dB.
- Powerful Headphone Ampජීවිත කාලය: Features the NFCA-LE module with a noise floor of 0.9uVrms and 1-ohm output impedance, offering two gain adjustments (up to +17dBu) and 580mW x 2 @ 32 Ohm output for professional headphones.
- Real-Time Monitoring & Mixer Control: Zero-latency hardware monitoring system and four 8-channel input mixers, 6 DAW channels, and 4 LoopBack channels for efficient audio management.
- බහුකාර්ය අනුකූලතාව: Compatible with Windows, Mac, iOS, and Android via Type-C connection.
2. පිහිටුවීම
2.1 පැකේජයේ අන්තර්ගතය
ආරම්භ කිරීමට පෙර, සියලුම අයිතම පැකේජයේ ඇති බවට වග බලා ගන්න:
2.2 ඔබගේ උපාංගයට සම්බන්ධ වීම
- බලය සහ දත්ත සම්බන්ධතාවය: Connect the E2X2 to your computer (PC or Mac) or mobile device (iPhone or Android) using the provided USB Type-C cable. The E2X2 draws power and transmits data through this single connection.
- මයික්රෆෝනය/උපකරණ සම්බන්ධතාවය: Plug your microphone into the XLR/TRS combo inputs (IN1 L or IN2 R) on the front panel. If using a condenser microphone, activate the 48V phantom power by pressing the corresponding 48V button. For instruments, use a 1/4-inch TS cable and press the "INST" button for instrument-level input.
- හෙඩ්ෆෝන් සම්බන්ධතාවය: ඔබේ හෙඩ්ෆෝන් ඉදිරිපස පුවරුවේ ඇති 6.35mm හෙඩ්ෆෝන් ජැක් එකට සම්බන්ධ කරන්න.
- ස්පීකර් සම්බන්ධතාවය: Connect your studio monitors or speakers to the Line Out (1L and 2R) jacks on the rear panel using 1/4-inch TRS cables.
2.3 ධාවක සහ මෘදුකාංග ස්ථාපනය
For Windows users, it is recommended to install the dedicated TOPPING control software and drivers for optimal performance. Mac and iOS devices typically offer class-compliant operation, meaning no additional drivers are required, though the control software may provide enhanced functionality. Refer to the official TOPPING website for the latest drivers and software downloads.
3. මෙහෙයුම
3.1 ඉදිරිපස පැනල් පාලන
- MON (Monitor) Knobs: Adjust the monitoring level for each input channel.
- 48V බොත්තම්: Activate phantom power for condenser microphones. An indicator light will illuminate when active.
- INST (Instrument) Buttons: Switch the input to instrument level for direct connection of guitars or other instruments.
- ආදාන/ප්රතිදාන මට්ටමේ මීටර: LED indicators display input and output signal levels, helping to prevent clipping.
- මොනිටර් බොත්තම: ඔබගේ ස්ටුඩියෝ මොනිටරවල සමස්ත ප්රතිදාන මට්ටම පාලනය කරයි.
- GAIN බොත්තම්: Adjust the input gain for each microphone/instrument channel.
- INPUT/PLAYBACK Button: Toggles between monitoring the input signal directly (zero-latency) or the playback signal from your computer/DAW.
- හෙඩ්ෆෝන් ප්රතිදානය: 6.35mm jack for connecting headphones. The headphone volume is controlled by the MONITOR knob when in playback mode, or by the individual MON knobs for direct monitoring.
3.2 තත්ය කාලීන නිරීක්ෂණය
The E2X2 features a zero-latency hardware monitoring system. This allows you to hear your input signal directly through your headphones or speakers without any delay, which is crucial for recording. Use the INPUT/PLAYBACK button to switch between monitoring your live input and the audio playing back from your software.
3.3 Mixer Control
The E2X2 includes a comprehensive mixer control system accessible via its dedicated software. This allows for advanced audio routing and mixing, featuring four 8-channel input mixers, 6 DAW channels, and 4 LoopBack channels. This functionality provides flexibility for diverse recording and streaming scenarios.
4. නඩත්තු කිරීම
To ensure the longevity and optimal performance of your TOPPING E2X2, follow these maintenance guidelines:
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners, aerosols, or solvents, as these can damage the finish or internal components.
- ගබඩා: Store the E2X2 in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- හැසිරවීම: භෞතික හානි වළක්වා ගැනීම සඳහා උපාංගය ප්රවේශමෙන් හසුරුවන්න. බිම හෙළීමෙන් හෝ දැඩි බලපෑම්වලට ලක්වීමෙන් වළකින්න.
- වාතාශ්රය: අධික උනුසුම් වීම වැළැක්වීම සඳහා ඒකකය වටා නිසි වාතාශ්රය සහතික කරන්න. කිසිදු වාතාශ්රය විවරයක් අවහිර නොකරන්න.
5. දෝශ නිරාකරණය
If you encounter issues with your TOPPING E2X2, refer to the following common troubleshooting steps:
- බලය නැත: Ensure the USB-C cable is securely connected to both the E2X2 and your computer/power source. Try a different USB port or cable.
- No Sound (Input):
- Check if the microphone/instrument is properly connected to the correct input.
- Verify that the GAIN knob for the respective channel is turned up.
- If using a condenser microphone, ensure 48V phantom power is activated.
- Check your computer's sound settings to ensure the E2X2 is selected as the input device.
- No Sound (Output):
- Ensure headphones or speakers are correctly connected to the output jacks.
- Adjust the MONITOR knob to increase output volume.
- Check your computer's sound settings to ensure the E2X2 is selected as the output device.
- If using the INPUT/PLAYBACK button, ensure it is set to PLAYBACK for DAW audio.
- අධික ශබ්දය/හම්:
- Ensure all cables are properly shielded and securely connected.
- Check for ground loops. Try connecting the computer and E2X2 to the same power outlet.
- Reduce input gain if the signal is too hot (clipping).
- Software Not Recognizing E2X2:
- Restart your computer and the E2X2.
- Reinstall the latest drivers and control software from the TOPPING webඅඩවිය.
- ඔබගේ මෙහෙයුම් පද්ධතිය යාවත්කාලීන බව සහතික කර ගන්න.
If problems persist, contact TOPPING customer support for further assistance.
6. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | E2X2 |
| අයිතමයේ බර | රාත්තල් 1.17 (දළ වශයෙන් කිලෝග්රෑම් 0.53) |
| නිෂ්පාදන මානයන් | 3.94 x 3.94 x 0.98 අඟල් (ආසන්න වශයෙන් 10 x 10 x 2.5 සෙ.මී.) |
| සම්බන්ධතා තාක්ෂණය | USB Type-C |
| නාලිකා ගණන | 2 (ආදාන) |
| මයික්රෆෝනය පෙරamp | Ultra-Linear, EIN as low as -130.5dBu |
| ෆැන්ටම් බලය | 48V (switchable) |
| Input DNR (ADC) | 118dB |
| Output DNR (DAC) | 115dB |
| ADC THD+N | <0.0003% |
| DAC THD+N | <0.001% |
| හෙඩ්ෆෝන් Amp ප්රතිදානය | 580mW x 2 @ 32 Ohm |
| හෙඩ්ෆෝන් Amp ශබ්ද තට්ටුව | 0.9uVrms |
| සහාය දක්වන එස්ample Rates/Bit Depth | 44.1kHz/24bit to 192kHz/24bit |
| මෙහෙයුම් පද්ධති අනුකූලතාව | Windows, Mac, iOS, Android |
| සහාය දක්වන මෘදුකාංග | Avid Pro Tools, Ableton Live, Steinberg Cubase, Studio One, Logic Pro, Nuendo, Reaper, Audacity, Adobe Audition, etc. |
7. වගකීම් තොරතුරු
The TOPPING E2X2 USB Audio Interface comes with a standard manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included in your product packaging or visit the official TOPPING webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
8. සහාය
For technical support, driver updates, or further inquiries about your TOPPING E2X2, please visit the official TOPPING webඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට වෙබ් අඩවියට පිවිසෙන්න හෝ සම්බන්ධ වන්න. ඔබට අමතර සම්පත් සහ නිතර අසන ප්රශ්න ද සොයාගත හැකිය. TOPPING Store on Amazon.
