හැඳින්වීම
Thank you for choosing the Scheppach HMS1500 Planer/Thicknesser. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your machine. Please read these instructions carefully before initial use and keep them for future reference. Proper use and maintenance will ensure optimal performance and extend the lifespan of your tool.
සාමාන්ය ආරක්ෂණ උපදෙස්
අවවාදයයි: මෙම බල මෙවලම සමඟ සපයා ඇති සියලුම ආරක්ෂක අනතුරු ඇඟවීම්, උපදෙස්, නිදර්ශන සහ පිරිවිතර කියවන්න. පහත ලැයිස්තුගත කර ඇති සියලුම උපදෙස් අනුගමනය කිරීමට අපොහොසත් වීමෙන් විදුලි කම්පනය, ගින්න සහ/හෝ බරපතල තුවාල සිදුවිය හැක.
- වැඩ ප්රදේශයේ ආරක්ෂාව: වැඩ කරන ප්රදේශය පිරිසිදුව හා හොඳින් ආලෝකමත්ව තබා ගන්න. අවුල් සහගත හෝ අඳුරු ප්රදේශ අනතුරු වලට ආරාධනා කරයි. දැවෙන ද්රව, වායූන් හෝ දූවිලි තිබීම වැනි පුපුරන සුලු වායුගෝලයක බල මෙවලම් ක්රියාත්මක නොකරන්න. බල මෙවලම් දූවිලි හෝ දුම දැල්විය හැකි ගිනි පුපුරු ඇති කරයි. බල මෙවලමක් ක්රියාත්මක කරන අතරතුර ළමයින් සහ අවට සිටින අය ඈත් කර තබන්න. අවධානය වෙනතකට යොමු කිරීම නිසා ඔබට පාලනය අහිමි විය හැකිය.
- විදුලි ආරක්ෂාව: Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
- පුද්ගලික ආරක්ෂාව: Always wear eye protection. Use safety glasses, goggles, or a face shield. Wear hearing protection when operating noisy tools. Wear a dust mask if the operation creates dust. Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
- බල මෙවලම් භාවිතය සහ රැකවරණය: Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- Specific Planer/Thicknesser Safety:
- Always ensure the workpiece is free of nails, screws, or other foreign objects before planing.
- Never plane material shorter than 300mm (12 inches) without a push block.
- Keep hands clear of the cutter head at all times.
- ක්රියාත්මක වීමට පෙර සියලුම ආරක්ෂකයන් ස්ථානගත වී නිවැරදිව ක්රියාත්මක වන බවට සහතික වන්න.
- Always feed the workpiece against the direction of rotation of the cutter head.
- Do not remove jammed workpieces until the machine is switched off and the cutter head has stopped completely.
- Connect the machine to a dust extraction system to minimize airborne dust.
නිෂ්පාදනය අවසන්view
The Scheppach HMS1500 is a versatile 2-in-1 planer and thicknesser designed for woodworking tasks. It allows for precise surface planing (jointing) and thicknessing of various wood types, ensuring straight and parallel surfaces. Key features include a powerful motor, adjustable tables, and an integrated dust extraction port.
රූපය 1: Operator using the Scheppach HMS1500 for planing wood. Always wear appropriate personal protective equipment.
රූපය 2: විස්තර view of the wood passing through the planer, demonstrating the precise cutting action of the 2-blade cutter head.
රූපය 3: The machine features transport handles and wheels for easy mobility within the workshop.
රූපය 4: ඉදිරිපස පැත්ත view of the Scheppach HMS1500, showcasing its robust construction and controls.
රූපය 5: පසුපස view of the machine, highlighting the integrated dust extraction port for a clean working environment.
රූපය 6: Three-quarter view of the Scheppach HMS1500, showing the planer tables and thicknesser bed configuration.
වීඩියෝ පිළිබඳ සටහන: මෙම උපදෙස් අත්පොතට ඇතුළත් කිරීම සඳහා විකුණුම්කරුගේ නිල නිෂ්පාදන වීඩියෝ කිසිවක් අදාළ නොවන බව සොයා ගන්නා ලදී.
සැකසීම සහ එකලස් කිරීම
Before operating the machine, ensure it is properly assembled and secured. Refer to the assembly diagrams in your packaging for detailed steps.
- ඇසිරීම: Carefully remove all components from the packaging. Check for any damage during transit. Retain packaging for future transport or storage.
- මූලික එකලස් කිරීම: Assemble the stand/base according to the provided instructions. Ensure all bolts are securely tightened. The machine is heavy (71 kg), so assistance may be required.
- Machine Mounting: Mount the planer/thicknesser unit onto the assembled stand. Secure it firmly using the provided fasteners.
- දූවිලි නිස්සාරණ සම්බන්ධතාවය: Connect a suitable dust extraction system to the integrated dust port. This is crucial for maintaining a clean workspace and for your health.
- විදුලි සම්බන්ධතාවය: Ensure the power supply matches the machine's requirements (220-240V). Plug the machine into a grounded outlet.
- මූලික පරීක්ෂාවන්: Before first use, manually check that all moving parts are free to move and that all guards are correctly positioned and secured.
මෙහෙයුම් උපදෙස්
1. Planing (Jointing) Operation
- Adjusting the Infeed Table: Set the desired depth of cut using the infeed table adjustment knob. The maximum depth of cut is 3mm.
- වැට සකස් කිරීම: Position the aluminum fence at the desired angle (90-135°) and secure it firmly.
- Feeding the Workpiece: Place the workpiece on the infeed table. Ensure it is flat and free of defects. Turn on the machine. Carefully feed the workpiece into the cutter head, keeping your hands away from the blades. Use push blocks for shorter pieces.
- Maintaining Pressure: Apply even pressure to the workpiece as it passes over the cutter head and onto the outfeed table.
2. Thicknessing Operation
- Converting to Thicknesser: Lift and secure the planer tables out of the way to expose the thicknesser bed.
- Adjusting Thickness: Use the handwheel to adjust the height of the thicknesser table to achieve the desired final thickness. The maximum thicknessing height is 160mm.
- Feeding the Workpiece: Turn on the machine. Feed the workpiece into the thicknesser opening. The feed rollers will automatically pull the wood through. Do not force the workpiece.
- බහු පාස්: For significant material removal, take multiple shallow passes rather than one deep pass to prevent overloading the motor and ensure a smoother finish.
නඩත්තු කිරීම
Regular maintenance ensures the longevity and safe operation of your Scheppach HMS1500.
- පිරිසිදු කිරීම: After each use, disconnect the machine from the power supply. Clean all wood chips and dust from the tables, cutter head area, and dust extraction port. Use a brush or compressed air. Do not use solvents that may damage painted surfaces.
- තල පරීක්ෂාව සහ ප්රතිස්ථාපනය: Regularly inspect the planer blades for sharpness and damage. Dull or chipped blades can lead to poor finish and increased motor strain. Replace both blades simultaneously to maintain balance. Refer to the detailed instructions in the full manual for blade replacement procedures.
- මේස ලිහිසි කිරීම: Periodically apply a thin coat of dry lubricant (e.g., silicone spray or paste wax) to the planer and thicknesser tables to reduce friction and prevent rust.
- Motor and Belt Inspection: Check the motor ventilation openings for obstructions. Inspect drive belts for wear or damage. Replace if necessary.
- General Fastener Check: Periodically check all nuts, bolts, and screws for tightness. Tighten as needed.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| යන්ත්රය ආරම්භ නොවේ. | No power supply; Emergency stop engaged; Thermal overload tripped. | Check power connection; Release emergency stop button; Allow motor to cool down and reset. |
| Poor surface finish (e.g., tear-out, ripples). | Dull or damaged blades; Incorrect depth of cut; Too fast feed rate; Wood grain issues. | Replace or sharpen blades; Reduce depth of cut; Slow down feed rate; Adjust feed direction relative to grain. |
| Wood jams during thicknessing. | Excessive depth of cut; Workpiece too wide/thick; Feed rollers dirty or worn. | Reduce depth of cut; Ensure workpiece dimensions are within limits; Clean feed rollers. |
| අධික කම්පනය හෝ ශබ්දය. | Loose fasteners; Unbalanced blades; Worn bearings. | Check and tighten all fasteners; Ensure blades are correctly installed and balanced; Contact service for bearing replacement. |
මෙහි ලැයිස්තුගත කර නොමැති ගැටළු වලට ඔබ මුහුණ දෙන්නේ නම් හෝ විසඳුම් ගැටළුව විසඳන්නේ නැත්නම්, කරුණාකර Scheppach පාරිභෝගික සහාය අමතන්න.
තාක්ෂණික පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආකෘතිය | HMS1500 |
| නිෂ්පාදකයා | ෂෙපච් |
| බල සැපයුම | 220-240 V |
| මෝටර් බලය | වොට් 2200 |
| සැලසුම් පළල | 260 මි.මී |
| Thicknessing Height | 160 මි.මී |
| බ්ලේඩ් ගණන | 2 |
| Cutter Head Speed | 6500 rpm |
| Max. Depth of Cut (Planing) | 3 මි.මී |
| Jointer Table Dimensions | 1040 x 280 mm (Aluminum) |
| Fence Swivel Range | 90-135° |
| යන්ත්ර ද්රව්ය | Cast Iron, Aluminum |
| අයිතමයේ බර | කිලෝ ග්රෑම් 71 යි |
| වර්ණය | නිල් |
වගකීම් සහ සහාය
Scheppach products are manufactured to high-quality standards. In the unlikely event of a defect, please refer to the following information:
- වගකීම්: This product is covered by legal guarantees. Please retain your proof of purchase for warranty claims.
- ප්රතිලාභ: A 30-day return policy may apply, subject to retailer terms and conditions.
- පාරිභෝගික සහාය: For technical assistance, spare parts, or warranty inquiries, please contact Scheppach's specialized customer support. Contact details can typically be found on the Scheppach webවෙබ් අඩවිය හෝ ඔබේ මිලදී ගැනීමේ ලියකියවිලි.