Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set Instruction Manual

1. නිෂ්පාදන අවසන්view

The Audio Array AM-W20 is a magnetic wireless lapel microphone set designed for high-fidelity audio recording. It features one-touch smart noise reduction, 48KHz/24Bit Hi-fi recording capabilities, a 50-meter wireless range, and an 800mAh battery providing up to 48 hours of operation with the charging case. This microphone is suitable for various applications including vlogging, podcasting, and streaming.

Image: The Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set, including the transmitter, receiver, and charging case.

ප්රධාන ලක්ෂණ:

• අධි-විශ්වාසනීය පටිගත කිරීම: 48kHz/24bit audio capture with a 70dB signal-to-noise ratio.
• ස්මාර්ට් ශබ්දය අඩු කිරීම: One-touch activation for clear voice recordings in noisy environments.
• විස්තීරණ රැහැන් රහිත පරාසය: Up to 50 meters (164 feet) of uninterrupted working range.
• දිගු බැටරි ආයු කාලය: Up to 4 hours on a single charge, and up to 48 hours with the charging case.
• විශ්ව අනුකූලතාව: Supports iOS (with Type-C to Lightning adapter) and Android devices (Type-C/USB-C ports) with OTG support.
• Magnetic Clip Design: Allows for versatile and secure positioning.

Image: Visual representation of the AM-W20's key features, including compatibility, magnetic clip, wireless technology, audio quality, range, battery life, and noise cancellation.

2. සැකසුම් උපදෙස්

2.1 මූලික යුගලනය සහ සම්බන්ධතාවය

The Audio Array AM-W20 system is pre-paired at the factory for immediate use. No manual pairing is required for initial setup.

1. උපාංග ආරෝපණය කරන්න: Ensure both the transmitter (TX) and receiver (RX) are fully charged using the provided charging case.
2. ග්රාහකයා සම්බන්ධ කරන්න: Plug the receiver (RX) into the Type-C or USB-C port of your recording device (smartphone, tablet, etc.). For iOS devices, use the included Type-C to Lightning adapter.
3. Power On Transmitter: Take the transmitter (TX) out of the charging case. It will automatically power on and connect to the receiver.
4. සම්බන්ධතාවය තහවුරු කරන්න: A solid indicator light on both the transmitter and receiver typically signifies a successful connection.

Image: Visual guide demonstrating the three-step plug-and-play connection process: 1. Plug in the receiver, 2. Turn on the transmitter, 3. Devices are connected.

2.2 Device Compatibility and OTG Function

The AM-W20 is compatible with a wide range of devices, including iPhones, iPads, and Android smartphones/tablets with Type-C or USB-C ports. OTG (On-The-Go) support is essential for Android devices.

• iOS උපාංග: Use the provided Type-C to Lightning adapter.
• Android උපාංග: Ensure your device supports OTG. Some Android smartphones require you to manually enable the OTG function in their settings for external microphones to work correctly.

Image: Illustration of the AM-W20's broad compatibility with various mobile devices and applications.

Image: Guide for Android users on enabling OTG and configuring the 'Open Camera' app for external microphone use.

3. මෙහෙයුම් උපදෙස්

3.1 බලය සක්රිය / අක්රිය

The transmitter (TX) automatically powers on when removed from the charging case. To manually power on or off, press and hold the power button on the transmitter.

3.2 Noise Cancellation (ANC Mode)

The AM-W20 features a smart noise reduction function to minimize background interference.

• සක්රිය කිරීම: Press the yellow button on the transmitter once to activate noise cancellation. A green indicator light will illuminate on the transmitter.
• අක්රිය කිරීම: Press the yellow button again to deactivate noise cancellation.
• ස්වයංක්‍රීය සක්‍රිය කිරීම: Noise cancellation is active automatically when the transmitter is turned on.

Image: The AM-W20 transmitter highlighting the yellow button for one-tap noise cancellation.

3.3 නිශ්ශබ්ද කාර්යය

To temporarily mute the microphone during recording:

• Activation/Deactivation: Double-tap the power button on the transmitter.

Image: Explanation of Audio Modes, showing single tap for ANC and double tap for Mute.

3.4 මයික්‍රෆෝනය ස්ථානගත කිරීම

The AM-W20 features a magnetic clip for flexible and secure attachment.

• චුම්බක ඇමුණුම: Use the magnetic clip to attach the microphone to clothing or other surfaces.
• ප්රශස්ත ස්ථානගත කිරීම: For best audio quality, position the microphone approximately 6-8 inches (15-20 cm) below your mouth, centered on your chest. Avoid placing it directly under your chin or too close to your mouth to prevent plosives and distortion.

Image: Demonstrates various ways to wear the microphone, including magnetic attachment, necklace style, and traditional clip.

4. නඩත්තු කිරීම

4.1 Charging the Microphone Set

The AM-W20 microphone set is powered by an internal rechargeable battery. The charging case provides extended battery life.

• සම්ප්‍රේෂක බැටරි ආයු කාලය: එක් ආරෝපණයකින් පැය 4 දක්වා.
• Total Battery Life with Case: පැය 48 දක්වා.
• අයකිරීම: Place the transmitter and receiver into the charging case. Connect the charging case to a power source using a standard USB-C cable. The indicator lights on the case will show the charging status.

Image: Visual display of the AM-W20's battery performance, indicating 4 hours of use per charge and 48 hours with the charging case.

4.2 පිරිසිදු කිරීම සහ ගබඩා කිරීම

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the microphone and charging case. Avoid using liquids or abrasive cleaners.
• ගබඩා: Store the microphone set in its charging case in a cool, dry place away from direct sunlight and extreme temperatures.

5. දෝශ නිරාකරණය

If you encounter issues with your Audio Array AM-W20, refer to the following common troubleshooting steps:

• Microphone Disconnects:
  • Ensure the receiver is securely plugged into your device.
  • Check the battery level of both the transmitter and receiver.
  • Verify that there are no significant obstacles or sources of interference within the 50-meter range.
  • For Android devices, confirm that the OTG function is enabled in your phone's settings.
• Poor Audio Quality / Disturbance / Shrieking Sound:
  • ශබ්දය අවලංගු කිරීම: Ensure noise cancellation is activated (green light on TX). If recording in extremely noisy environments, some residual noise may still be present.
  • මයික්‍රෆෝනය ස්ථානගත කිරීම: Avoid placing the microphone too close to your mouth or directly under your chin. Optimal placement is typically 6-8 inches below the mouth.
  • පටිගත කිරීමේ පරිමාව: If experiencing a shrieking sound, the input volume might be too high. Adjust the recording volume settings on your device if possible.
  • බාධා කිරීම්: බාධා ඇති කළ හැකි වෙනත් රැහැන් රහිත උපාංගවලින් හෝ ශක්තිමත් විද්‍යුත් චුම්භක ක්ෂේත්‍රවලින් ඈත් වන්න.
• අයකිරීමේ ගැටළු:
  • Ensure the USB-C charging cable is fully inserted into both the charging case and the power adapter.
  • Try a different USB-C cable and power adapter to rule out faulty accessories.
  • Check for any debris in the charging ports of the case or devices.
• No Sound Recording (Android):
  • Enable OTG in your phone's settings.
  • Use a third-party camera app like 'Open Camera' and ensure 'External mic' is selected as the audio source in its settings.

6. පිරිවිතර

7. වගකීම් සහ සහාය

For product support, technical assistance, or warranty inquiries, please contact Audio Array customer service using the information below:

• දුරකථනය: +91 9372146440
• විද්‍යුත් තැපෑල: support@audioarray.in

Image: Audio Array customer support details, including phone number and email for assistance.

ඕනෑම වගකීම් හිමිකම් පෑමක් සඳහා කරුණාකර ඔබගේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.