DARKROCK D240 CPU Liquid Cooler Instruction Manual

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your DARKROCK D240 CPU Liquid Cooler. Please read this guide thoroughly before beginning installation to ensure proper setup and optimal performance. The DARKROCK D240 is an all-in-one (AIO) liquid cooling system designed to efficiently dissipate heat from your CPU, featuring a 240mm radiator, addressable RGB lighting, and a pure copper pump base.

Image: The DARKROCK D240 CPU Liquid Cooler integrated into a computer system, showcasing its RGB lighting effects.

2. පිහිටුවීම සහ ස්ථාපනය

2.1 පැකේජයේ අන්තර්ගතය

ස්ථාපනය කිරීමට පෙර, සියලුම සංරචක පැකේජයේ ඇති බව තහවුරු කර ගන්න:

• 1x Radiator with Integrated Pump and Tubing
• 2x 120mm ARGB PWM Cooling Fans
• Intel Mounting Bracket (LGA1851/1700/1200/115X)
• AMD සවිකිරීමේ වරහන (AM5/AM4)
• ඉන්ටෙල් සොකට් සඳහා පසුතලය
• Mounting Screws and Standoffs for Intel/AMD
• තාප පේස්ට්
• පංකා ඉස්කුරුප්පු
• 1 to 3 Fan Splitter Cable
• RGB Controller (if included with your model)

රූපය: සවිස්තරාත්මක view of all parts and accessories included in the DARKROCK D240 CPU Liquid Cooler package.

2.2 පූර්ව ස්ථාපන පියවර

1. ඔබේ මවු පුවරුව සූදානම් කරන්න: Ensure your motherboard is compatible with the cooler. The D240 supports Intel LGA1851/1700/1200/115X and AMD AM5/AM4 sockets.
2. Remove Old Cooler: If replacing an existing cooler, carefully remove it and clean any old thermal paste from the CPU surface using isopropyl alcohol.
3. Identify Mounting Hardware: Select the appropriate mounting bracket and screws for your CPU socket type (Intel or AMD).

Image: Visual representation of the cooler's compatibility with various AMD and Intel CPU sockets.

2.3 රේඩියේටර් සහ විදුලි පංකා සවි කිරීම

1. Attach the two 120mm fans to the radiator using the provided fan screws. Ensure the fan airflow direction is appropriate for your case (typically exhausting air out of the case).
2. Mount the radiator assembly to an available 240mm fan mount in your PC case (e.g., top, front, or side).

Image: Illustration of the 120mm PWM/ARGB cooling fans and the radiator, highlighting their features.

රූපය: සමීප ඡායාරූපයක් view of the radiator's fin structure, designed for optimal heat dissipation.

2.4 Installing the Pump Head

1. Apply a small amount of thermal paste to the center of your CPU's integrated heat spreader (IHS).
2. Attach the correct mounting bracket to the pump head. Ensure the protective film is removed from the copper base before installation.
3. Carefully place the pump head onto the CPU, aligning the mounting holes with the standoffs on the motherboard.
4. Secure the pump head with the thumb screws, tightening them in a diagonal pattern until snug. Do not overtighten.

Image: A visual representation of the pure copper base of the pump and the liquid circulation path.

2.5 රැහැන් සම්බන්ධතා

Connect the pump and fan cables to your motherboard or an RGB controller as follows:

• පොම්ප බලය: Connect the pump's 3-pin or 4-pin connector to the dedicated AIO_PUMP or CPU_OPT header on your motherboard.
• විදුලි පංකා බලය: Connect the fan cables to the 1-to-3 splitter cable, then connect the splitter to a CPU_FAN or SYS_FAN header on your motherboard.
• ARGB ආලෝකකරණය: Connect the ARGB cables from the fans and pump head to a 5V 3-pin ARGB header on your motherboard or to the included RGB controller. Ensure correct pin alignment to prevent damage.
• RGB Controller Power: If using an RGB controller, connect it to a SATA power connector from your power supply.

Image: A comprehensive diagram illustrating the electrical connections for the pump, fans, and ARGB lighting.

2.6 ස්ථාපන වීඩියෝව

ස්ථාපන ක්‍රියාවලිය පිළිබඳ දෘශ්‍ය මාර්ගෝපදේශයක් සඳහා, කරුණාකර නිල ස්ථාපන වීඩියෝව බලන්න:

3. මෙහෙයුම් උපදෙස්

3.1 මුලික බලය ක්‍රියාත්මක කිරීම

After completing the installation and wiring, power on your computer. The fans and pump should start operating, and the ARGB lighting should illuminate. Monitor your CPU temperatures using system monitoring software to ensure proper cooling.

3.2 ARGB ආලෝකකරණ පාලනය

The DARKROCK D240 features addressable RGB lights on both the fans and the water-cooling head. These can be controlled via:

• මවු පුවරු මෘදුකාංග: If connected to a compatible 5V 3-pin ARGB header, you can synchronize and customize lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
• Included RGB Controller: If your model includes a dedicated RGB controller, use its buttons or remote control to cycle through various lighting modes, colors, and effects.

Image: A computer case interior illuminated by the customizable addressable RGB lighting of the DARKROCK D240 cooler and other components.

Image: The RGB controller and its remote, used for adjusting the cooler's lighting effects.

3.3 PWM Smart Control

The adjustable PWM fans (800 RPM - 1800 RPM) automatically adjust their speed based on CPU temperature. This provides efficient cooling when needed and reduces noise during lighter loads. You can often fine-tune fan curves through your motherboard's BIOS settings or dedicated software.

3.4 නිෂ්පාදන ප්‍රදර්ශන වීඩියෝව

Observe the DARKROCK D240 in action with its dynamic RGB lighting and cooling capabilities:

4. නඩත්තු කිරීම

Regular maintenance helps ensure the longevity and optimal performance of your liquid cooler:

• දූවිලි පිරිසිදු කිරීම: වායු ප්‍රවාහයට බාධා කළ හැකි සහ සිසිලන කාර්යක්ෂමතාව අඩු කළ හැකි දූවිලි එකතු වීම වැළැක්වීම සඳහා රේඩියේටර් වරල් සහ විදුලි පංකා තල වරින් වර පිරිසිදු කරන්න. සම්පීඩිත වාතය හෝ මෘදු බුරුසුවක් භාවිතා කරන්න.
• නල සහ සම්බන්ධතා පරීක්ෂා කරන්න: Occasionally check the tubing for any signs of leaks or kinks. Ensure all electrical connections are secure.
• තාප පේස්ට්: While not frequently required, if you ever remove the pump head from the CPU, you will need to clean off the old thermal paste and apply new paste before reinstallation.

5. දෝශ නිරාකරණය

If you encounter issues with your DARKROCK D240 CPU Liquid Cooler, consider the following:

• බලය නැත / විදුලි පහන් නැත:
  • Check all power connections (pump, fans, RGB controller) to ensure they are securely plugged in.
  • Verify that the motherboard headers are supplying power (check BIOS settings).
  • If using an RGB controller, ensure it is receiving SATA power.
• ඉහළ CPU උෂ්ණත්වයන්:
  • Confirm the pump is running (you might feel a slight vibration or hear a low hum).
  • Ensure the pump head is securely mounted to the CPU and thermal paste was applied correctly.
  • Check fan operation and ensure they are spinning and providing adequate airflow.
  • Clean any dust from the radiator fins.
• අසාමාන්‍ය ශබ්දය:
  • Identify if the noise is coming from the fans or the pump.
  • For fans, check for obstructions or loose mounting.
  • For pump noise, ensure it's not running dry (though unlikely with a sealed AIO).
• RGB Not Working/Incorrect Colors:
  • Verify the ARGB cables are connected to a 5V 3-pin header, not a 12V 4-pin RGB header, as this can cause damage.
  • Check motherboard RGB software settings or RGB controller mode.
  • Ensure all ARGB connections are firm.

6. පිරිවිතර

7. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official DARKROCK webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවය අමතන්න. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

Optional protection plans may be available for extended coverage. Please check with your retailer for details on available protection plans.