1. හැඳින්වීම
This manual provides detailed instructions for the installation, operation, and maintenance of your YUHANUS 1200lb Electric Magnetic Lock Kit. This comprehensive access control system is designed to enhance security for various door types, offering multiple entry and exit methods.
2 ආරක්ෂිත තොරතුරු
- විදුලි ආරක්ෂාව: This system operates on 12V DC. Ensure all power connections are made correctly and securely. Disconnect power before performing any installation or maintenance.
- වෘත්තීය ස්ථාපනය: While designed for ease of installation, professional assistance is recommended for complex wiring or if you are unfamiliar with electrical systems.
- Waterproof Components: The keypad, exit button, and magnetic lock are waterproof for outdoor use. Ensure all connections are properly sealed to maintain water resistance.
- ආරක්ෂිත සවි කිරීම: Ensure all components, especially the magnetic lock, are securely mounted to prevent accidental detachment or tampering.
3. පැකේජ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම සංරචක ඔබේ පැකේජයට ඇතුළත් කර ඇති බව තහවුරු කරගන්න:
රූපය 3.1: ඉවරයිview of the YUHANUS 1200lb Electric Magnetic Lock Kit components, including the magnetic lock, power supply, RFID keypad, exit button, doorbell, remote control receiver, and remote key fobs.
- 1 x 1200lb Electromagnetic Lock
- 1 x RFID Access Control Keypad
- 1 x Power Supply Unit (AC110V-240V input, DC12V output)
- 1 x Press to Exit Button
- 1 x Doorbell Chime Unit
- 1 x Remote Control Receiver
- 2 x Remote Key Fobs
- 5 x IC Cards (Smart Lock Tags)
- Mounting Hardware and Cables (as required)
4. පිහිටුවීම සහ ස්ථාපනය
This section outlines the general installation process. Refer to the wiring diagram for specific connections.
4.1 පද්ධතිය අවසන්view
Image 4.1: Diagram illustrating the placement of system components on the outside (keypad, smart lock tags) and inside (magnetic lock, power supply, doorbell, exit button, remote control) of a door.
4.2 සංරචක ස්ථාපනය
- Magnetic Lock Installation:
Mount the electromagnetic lock on the door frame and the armature plate on the door. Ensure proper alignment for secure locking. Refer to the dimensions for appropriate placement.
Image 4.2: Detailed dimensions of the 1200lb electromagnetic lock and its armature plate, showing measurements in millimeters and inches.
රූපය 4.3: උදාample of a magnetic lock installed on a door frame with the armature plate on the door.
- RFID Access Control Keypad:
Install the keypad on the exterior side of the door at a convenient height. It is waterproof for outdoor use.
රූපය 4.4: ඉදිරිපස view of the RFID Access Control Keypad with illuminated numbers and a doorbell icon.
- Press to Exit Button:
Mount the exit button on the interior side of the door. This button allows for easy egress.
Image 4.5: Dimensions of the 'Press to Exit' button, showing its height, width, and depth in millimeters and inches.
- Doorbell Chime Unit:
Install the doorbell chime unit indoors, in a location where it can be easily heard.
Image 4.6: The doorbell chime unit with its four-wire connection: Red (+12V), Black (GND), Green (BELL), and Yellow (BELL).
- දුරස්ථ පාලක ලබන්නා:
Place the remote control receiver indoors, ensuring it has a clear line of sight or minimal obstruction for optimal remote signal reception.
රූපය 4.7: අභ්යන්තර view of the remote control receiver module, showing the relay, antenna, and terminal blocks for connections (NC, COM, NO, V+, V-).
- විදුලිබල සැපයුම ඒකකය:
Mount the power supply unit in a secure, dry, and accessible indoor location. Ensure it is protected from moisture and direct sunlight. Do not open the power supply cover while connected to AC power.
Image 4.8: The power supply unit, indicating input (AC110V-240V) and output (DC12V 4A) terminals, along with connections for N.O., GND, N.C., +12V, PUSH, CTRL+, CTRL-, TIMING, and LED.
4.3 රැහැන් සටහන
Carefully follow the wiring diagram below to connect all components. Incorrect wiring can damage the system or pose a safety hazard.
Image 4.9: Detailed wiring diagram showing connections between the access control keypad, power supply, magnetic lock, exit switch button, doorbell, and remote control receiver.
Key Wiring Points:
- සම්බන්ධ කරන්න ප්රවේශ පාලන යතුරු පුවරුව වෙත බල සැපයුම (+12V, GND, PUSH) and the Doorbell Chime Unit (BELL).
- සම්බන්ධ කරන්න චුම්බක අගුල වෙත බල සැපයුම (N.O., GND).
- සම්බන්ධ කරන්න Exit Switch Button වෙත බල සැපයුම (PUSH, GND).
- සම්බන්ධ කරන්න දුරස්ථ පාලක ලබන්නා වෙත බල සැපයුම (V+, V-, NO, COM).
- Ensure AC 110V-220V input is correctly wired to the බල සැපයුම.
5. මෙහෙයුම් උපදෙස්
5.1 Accessing the Door
- මුරපදය ඇතුළත් කිරීම: Enter your programmed password on the RFID keypad, then press '#' to confirm. The lock will disengage for a set period.
- IC Card Entry: Present a programmed IC card (smart lock tag) to the RFID keypad. The lock will disengage.
- දුරස්ථ පාලක: Use the remote key fob to unlock the door from a distance. Press the unlock button on the remote.
5.2 Exiting the Door
- Press to Exit Button: Press the 'Press to Exit' button located on the interior side of the door. The lock will disengage, allowing you to exit.
5.3 Doorbell Function
- Visitors can press the doorbell icon on the RFID keypad. The indoor doorbell chime unit will sound, alerting occupants.
5.4 Programming (Keypad)
Refer to the specific keypad manual for detailed programming instructions for user passwords, IC cards, and system settings. Typically, this involves entering a master code, then specific commands for adding/deleting users or cards.
6. නඩත්තු කිරීම
- නිතිපතා පිරිසිදු කිරීම: Wipe down the keypad and other external components with a soft, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන්ගෙන් වළකින්න.
- සම්බන්ධතා චෙක්පත්: සියලුම රැහැන් සම්බන්ධතා ආරක්ෂිත බවත් විඛාදනයෙන් හෝ හානිවලින් තොර බවත් සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.
- Magnetic Lock Alignment: Ensure the magnetic lock and armature plate remain properly aligned for optimal performance. Adjust if necessary.
- බල සැපයුම: Ensure the power supply unit is well-ventilated and free from obstructions.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Lock does not engage/disengage | No power; Loose wiring; Misaligned lock; Faulty component. | Check power supply connection. Verify all wiring according to the diagram. Ensure magnetic lock and armature plate are aligned. Test individual components if possible. |
| යතුරු පෑඩය ප්රතිචාර නොදක්වයි | No power; Damaged keypad; Incorrect programming. | Check keypad power connection. Re-enter programming mode to verify settings. Replace keypad if damaged. |
| දුරස්ථ පාලකය ක්රියා නොකරයි | Dead battery in remote; Receiver not powered; Remote not paired. | Replace remote battery. Check receiver power and wiring. Follow instructions to pair remote with receiver. |
| Doorbell not chiming | Loose wiring; Faulty doorbell unit. | Check doorbell wiring connections. Test doorbell unit if possible. |
| System appears to have no working terminals except main input | Incorrect wiring; Faulty power supply or component. | Carefully re-check all wiring against the provided diagram. Ensure each terminal is connected to the correct component. If issues persist, test the power supply output with a multimeter to confirm 12V DC. Consult a professional electrician if unsure. |
8. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | යුහානස් |
| ආදර්ශ අංකය | YH-G1501-OP22-500-RT |
| අගුලු දැමීමේ බලය | 1200lb (Electromagnetic Lock) |
| බලශක්ති ප්රභවය | Wired (AC to DC Power Supply) |
| ආදාන වෙළුමtage (බල සැපයුම) | AC 110V-240V |
| ප්රතිදාන වෙළුමtage (බල සැපයුම) | DC 12V (4A) |
| සම්බන්ධතා තාක්ෂණය | Wired (Keypad, Lock, Button, Doorbell), Wireless (Remote Control) |
| ප්රවේශ ක්රම | Password, IC Card, Remote Control |
| යතුරු පෑඩ් විශේෂාංග | Waterproof, Integrated Doorbell Button |
| පිටවීමේ ක්රමය | Press to Exit Button |
| නිෂ්පාදන මානයන් | 12 x 7 x 3 inches (Overall Kit Packaging) |
| අයිතමයේ බර | රාත්තල් 11.84 කි |
| UPC | 769894491164 |
9. වගකීම් සහ සහාය
For warranty information and technical support, please refer to the documentation provided with your purchase or contact YUHANUS customer service. Keep your purchase receipt for warranty claims.
