හැඳින්වීම
The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.
සැකසුම් මාර්ගෝපදේශය
1. ඇසුරුම් ඉවත් කිරීම සහ ස්ථානගත කිරීම
Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration. Ensure adequate ventilation around the unit.
Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.
Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.
2. එකලස් කිරීම
- තැටිය ස්පින්ඩලය මත තබන්න.
- Carefully place the felt mat on top of the platter.
- Attach the dust cover by aligning its hinges with the slots on the turntable's base.
3. සම්බන්ධතා
Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your amplifier's ground terminal to minimize hum.
Figure 3: Rear connections for RCA output and ground wire.
Connect the power adapter to the turntable and then to a wall outlet.
මෙහෙයුම් උපදෙස්
1. බලය සක්රිය / අක්රිය කරන්න
Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.
Figure 4: Power switch location.
2. වාර්තාවක් වාදනය කිරීම
- Ensure the dust cover is open or removed.
- Place your vinyl record onto the felt mat on the platter.
- Carefully remove the stylus protector from the cartridge.
- ටෝනාර්ම් ලිෆ්ට් ලීවරය භාවිතයෙන් ටෝනියර්ම් ඔසවන්න.
- පටිගත කිරීමේ අපේක්ෂිත ආරම්භක කට්ට මතින් ස්වර බාහුව මෘදු ලෙස ගෙන යන්න.
- Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
- To stop playback, lift the tonearm using the lever and return it to its rest.
Figure 5: Tonearm and Ortofon OM 10 cartridge.
Figure 6: Ortofon OM 10 cartridge detail.
3. බ්ලූටූත් සම්බන්ධතාව
The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.
නඩත්තු කිරීම
1. Cleaning the Turntable
- Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.
2. ස්ටයිලස් සත්කාරය
- Regularly inspect the stylus for dust and debris.
- Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
- Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ශබ්දයක් නැත හෝ ඉතා අඩු ශබ්දයක් | වැරදි ආදාන තේරීමක් ක්රියාත්මකයි amplifier; loose cables; volume too low. | සහතික කරන්න amplifier input matches turntable connection (e.g., Line In); check all cable connections; increase volume. |
| හම්මිං හඬ | Ground wire not connected; interference from other electronics. | Connect the ground wire securely; move turntable away from other electronic devices. |
| මඟ හැරීම හෝ විකෘති වූ ශබ්දය | Dirty or worn stylus; record is dirty or damaged; turntable not level. | Clean the stylus; clean the record; ensure turntable is on a level surface; replace stylus if worn. |
| තැටිය කැරකෙන්නේ නැත | Power not connected; power switch off. | Check power connection; ensure power switch is in the 'On' position. |
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| නිෂ්පාදන මානයන් | අඟල් 13.19 x 16.34 x 3.94 |
| අයිතමයේ බර | රාත්තල් 14.92 කි |
| ASIN | B0DHTXH32G |
| අයිතම ආදර්ශ අංකය | T1 Evo with Preamp |
| නිෂ්පාදකයා | Pro-Ject |
| වෙළඳ නාමය | Pro-Ject |
| සම්බන්ධතා තාක්ෂණය | රැහැන්ගත |
| උපරිම භ්රමණ වේගය | 45 RPM |
| විශේෂ ලක්ෂණය | සකස් කළ හැකි වේගය |
| ශෛලිය | සාදන ලද පූර්වamp |
| වර්ණය | සැටින් වයිට් |
| මාදිලියේ නම | T1 Evo with Preamp |
| සං Sign ා සිට ශබ්ද අනුපාතය | 70 dB |
| පළමු දිනය තිබේ | 24 සැප්තැම්බර් 2024 |
වගකීම් සහ සහාය
වගකීම් තොරතුරු
This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.
පාරිභෝගික සහාය
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject webසම්බන්ධතා තොරතුරු සහ අමතර සම්පත් සඳහා අඩවිය.
Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.
