Diymore Humidity and Temperature Controller Socket User Manual

1. හැඳින්වීම

This manual provides comprehensive instructions for the Diymore Humidity and Temperature Controller Socket. This device is designed to precisely control humidity and temperature in various environments, such as incubators, terrariums, greenhouses, and storage areas. It features multiple operating modes, calibration functions, and an alarm system to maintain desired environmental conditions.

2 ආරක්ෂිත තොරතුරු

Please read all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Ensure the power supply matches the device's specifications (230V, 16A, max 3680W).
• Do not immerse the device or sensor in water or expose it to excessive moisture.
• උපාංගය විසුරුවා හැරීම හෝ වෙනස් කිරීම නොකරන්න.
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
• Unplug the device from the power outlet before cleaning or maintenance.
• වියළි, ​​ගෘහස්ථ පරිසරයක පමණක් භාවිතා කරන්න.

3. නිෂ්පාදන ලක්ෂණ

The Diymore Controller Socket offers a range of features for precise environmental control:

• මෙහෙයුම් ආකාර හතරක්: Humidification, Dehumidification, Heating, and Cooling.
• පුළුල් පාලන පරාසය: Humidity 20-95%RH; Temperature -10°C to 50°C (14°F to 122°F).
• Adjustable Start/Stop Values: Program connected devices to activate based on set humidity/temperature thresholds.
• ක්රමාංකන කාර්යය: Real-time adjustment for humidity (-10~10%RH) and temperature (-9.9~9.9°C).
• අනතුරු ඇඟවීමේ කාර්යය: Audible alarm when humidity or temperature exceeds set limits.
• දත්ත මතකය: Retains all settings after a power failure.
• නැවත පිහිටුවීමේ කාර්යය: Allows restoration of factory settings.
• Button Tone Settings: Customize button feedback.
• Error Prompt Function: Provides indications for operational issues.
• °C/°F Switching: සෙල්සියස් සහ ෆැරන්හයිට් උෂ්ණත්ව ඒකක අතර පහසුවෙන් මාරු වන්න.

රූපය 3.1: ඉවරයිview of Diymore Controller Socket features, including humidity and temperature control, alarm functions, calibration, and memory.

4. පැකේජ අන්තර්ගතය

පැකේජයට පහත අයිතම ඇතුළත් වේ:

• 1 x Diymore Humidity and Temperature Controller Socket (230V)
• 1 x External Sensor Probe

5. නිෂ්පාදන අවසන්view සහ මානයන්

Familiarize yourself with the device's components and dimensions.

රූපය 5.1: Diymore Controller Socket with external sensor.

රූපය 5.2: Product dimensions of the controller and sensor.

The main unit measures approximately 13.1 cm (5.11 in) in height, 6 cm (2.36 in) in width, and 3.2 cm (1.25 in) in depth. The sensor probe measures approximately 5.5 cm (2.16 in) in length and 2.3 cm (0.90 in) in width.

6. පිහිටුවීම

1. ඇසුරුම්: Carefully remove the controller and sensor from the packaging.
2. සංවේදකය සම්බන්ධ කරන්න: Ensure the external sensor probe is securely plugged into the designated port on the side of the controller.
3. ස්ථාන සංවේදකය: Place the sensor in the area where you wish to monitor and control humidity and temperature. Ensure it is not directly exposed to water or extreme conditions that could damage it.
4. ප්ලග් ඉන්: Insert the controller's plug into a standard 230V power outlet. The display will illuminate.
5. උපකරණ සම්බන්ධ කරන්න: Plug your humidifier, dehumidifier, heater, or cooler into the socket on the front of the controller.

7. මෙහෙයුම් උපදෙස්

The controller features four buttons: මාදිලිය, සකසන්න, ඉහළ/CLK, සහ පහළට.

7.1. උෂ්ණත්ව ඒකක මාරු කිරීම (°C/°F)

සෙල්සියස් (°C) සහ ෆැරන්හයිට් (°F) අතර මාරු වීමට:

• ඔබා අල්ලාගෙන සිටින්න සකසන්න button for 3 seconds. The temperature unit on the display will change.

7.2. මෙහෙයුම් මාදිලිය තේරීම

The device supports four main operating modes: Humidification (HC mode), Dehumidification (HC mode), Heating (TC mode), and Cooling (TC mode). Press the මාදිලිය button repeatedly to cycle through these modes.

රූපය 7.1: Examples of the four working modes and alarm settings.

7.3. Setting Humidity/Temperature Control Values

To set the desired start and stop values for humidity or temperature:

1. ඔබන්න මාදිලිය button to select either HC (Humidity Control) or TC (Temperature Control) mode.
2. ඔබන්න සකසන්න button once. The "Start Humidity" or "Start Temperature" value will begin to flash.
3. භාවිතා කරන්න ඉහළ/CLK සහ පහළට අපේක්ෂිත ආරම්භක අගය සකස් කිරීමට බොත්තම්.
4. ඔබන්න සකසන්න button again. The "Stop Humidity" or "Stop Temperature" value will flash.
5. භාවිතා කරන්න ඉහළ/CLK සහ පහළට අපේක්ෂිත නැවතුම් අගය සකස් කිරීමට බොත්තම්.
6. ඔබන්න සකසන්න button a third time, or wait a few seconds, to save the settings and exit.

සටහන: For humidification/heating, the start value should be lower than the stop value. For dehumidification/cooling, the start value should be higher than the stop value.

7.4. Setting Alarm Function

The device can trigger an alarm if humidity or temperature goes outside a set range.

1. ඔබන්න මාදිලිය button to select either HC Alarm (Humidity Alarm) or TC Alarm (Temperature Alarm) mode.
2. ඔබන්න සකසන්න button once. The alarm threshold value will flash.
3. භාවිතා කරන්න ඉහළ/CLK සහ පහළට buttons to adjust the desired alarm threshold.
4. ඔබන්න සකසන්න button again, or wait a few seconds, to save the setting and exit.

When the measured humidity/temperature exceeds the set alarm value, the hygrostat will emit an audible alarm sound.

7.5. ක්‍රමාංකන ශ්‍රිතය

To calibrate the humidity or temperature readings:

• ඔබා අල්ලාගෙන සිටින්න ඉහළ/CLK button. The calibration value will appear and flash.
• භාවිතා කරන්න ඉහළ/CLK සහ පහළට buttons to adjust the calibration offset.
  • Humidity correction range: -10%RH to 10%RH
  • Temperature correction range: -9.9°C to 9.9°C
• ඔබා අල්ලාගෙන සිටින්න මාදිලිය button to save the calibration and exit.

7.6. වෙනත් කාර්යයන්

• දත්ත මතකය: The device automatically saves all setting parameters, which are retained even after a power failure.
• නැවත පිහිටුවීමේ කාර්යය: To restore factory settings, refer to the specific instructions in the full manual (if available) or contact support.
• Button Tone Settings: The device allows for customization of button sounds. Refer to the full manual for detailed instructions.
• Turn Off Alarm Sound: Specific instructions for turning off the alarm sound are typically found in the full manual.

8. යෙදුම්

The Diymore Controller Socket is versatile and suitable for various applications requiring precise humidity and temperature control:

• ඉන්කියුබේටර්
• Domestic Reptile Habitats
• Poultry Houses
• Mushroom Cultivation
• Glass Containers / Terrariums
• හරිතාගාර
• Humidifiers and Dehumidifiers
• Household and Industrial Environments
• වයින් සෙලර්ස්
• ශීතකරණ
• ගබඩා

රූපය 8.1: Diverse applications of the Diymore Controller Socket.

9. නඩත්තු කිරීම

• පිරිසිදු කිරීම: Disconnect the device from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• සංවේදක සත්කාරය: Keep the sensor clean and free from dust or debris. Avoid bending or damaging the sensor cable.
• ගබඩා: If storing the device for an extended period, unplug it and store it in a dry, cool place.

10. දෝශ නිරාකරණය

If you encounter issues with your Diymore Controller Socket, refer to the following common problems and solutions:

11. පිරිවිතර

12. වගකීම් සහ සහාය

For warranty information or technical support, please refer to the documentation included with your purchase or contact Diymore customer service through their official website or the retailer where the product was purchased. Please have your model number (temperatuur vochtigheid) and purchase date available when contacting support.