1. හැඳින්වීම
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP Freelift Pro Dual Monitor Mount. Please read this guide thoroughly before installation to ensure correct setup and safe usage. This monitor mount is designed to enhance your workspace ergonomics and free up desk space by securely holding two monitors.
2 ආරක්ෂිත තොරතුරු
- එකලස් කිරීමට පෙර සියලුම සංරචක පවතින බවත් හානි නොවී ඇති බවත් සහතික කර ගන්න. කිසියම් කොටසක් අස්ථානගත වී හෝ දෝෂ සහිත නම් භාවිතා නොකරන්න.
- Follow all assembly steps carefully. Incorrect installation may result in product damage or personal injury.
- එක් අතකට උපරිම බර ධාරිතාව රාත්තල් 22 (කිලෝග්රෑම් 10) නොඉක්මවන්න.
- Ensure the desk surface is stable and strong enough to support the combined weight of the mount and monitors.
- Do not install on tempered glass table tops.
- ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.
3. පැකේජ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම කොටස් ඔබේ පැකේජයට ඇතුළත් කර ඇති බව තහවුරු කරගන්න:
- Main Pole and Base
- Dual Gas Spring Arms
- VESA Plates (x2)
- සී-ක්ලබ්amp එකලස් කිරීම
- Grommet Base Assembly
- දෘඩාංග කට්ටලය (ඉස්කුරුප්පු, රෙදි සෝදන යන්ත්ර, ස්පේසර්)
- Allen Keys (various sizes)
- කේබල් කළමනාකරණ ක්ලිප්
Refer to the 'Package List' section in the installation video for a visual guide to all included components.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates the unboxing and initial setup steps, including a visual overview සියලුම කොටස් වලින්.
4. පිහිටුවීම
4.1 Choose Mounting Type
The MOUNTUP Freelift Pro offers two installation options: C-Clamp or Grommet Mount. Select the method best suited for your desk.
- සී-ක්ලබ්amp සවිකිරීම: For desk thickness within 0.39''-2.76''.
- ග්රෝමට් කන්ද: For desk thickness within 0.39''-2.76'' and hole diameter within 0.39''-2.36''.
Image: Two Installation Options - Illustrates the C-clamp and grommet mounting methods with desk thickness and hole diameter specifications.
4.2 Base Installation (C-Clamp හෝ ග්රොමෙට්)
Follow the instructions in the video for your chosen mounting type:
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates both C-clamp and grommet base installation steps from 0:03 to 0:34.
4.3 Arm Installation
Attach the gas spring arms to the installed base as shown in the video.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates arm installation from 0:35 to 0:45.
4.4 නිරීක්ෂණයට VESA තහඩුව අමුණන්න
Secure the VESA plate to the back of your monitor using the provided screws. Ensure the plate is firmly attached.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates attaching the VESA plate to the monitor from 0:46 to 0:51.
4.5 Slide Monitor onto Arm
Carefully slide the monitor (with attached VESA plate) onto the arm's mounting head until it clicks into place. Secure it with the locking knob.
Image: Quick Release VESA Plate - Shows the quick-release VESA plate mechanism for easy monitor attachment and removal.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates sliding the monitor onto the arm from 0:52 to 0:56.
5. මෙහෙයුම් උපදෙස්
5.1 මොනිටරයේ පිහිටීම සකස් කිරීම
The Freelift Pro Dual Monitor Mount offers full motion adjustment for optimal viewසුවපහසුව:
- ඇලවීම: +85 ° සිට -45 ° දක්වා
- කරකැවීම: 180° (at VESA plate), 360° (at arm joint), 270° (at base joint)
- භ්රමණය: 360° (portrait to landscape)
- උස ගැලපීම: Max height up to 17.3 inches (from desk surface)
- දිගුව: Each arm extends up to 21 inches
Image: Freely Position Your Screen - Highlights the maximum height and extension capabilities of the monitor arms.
Image: Optimize Your View - Demonstrates the swivel, height, tilt, and rotation ranges for flexible monitor positioning.
Image: Full Motion Adjustment - Details the extensive swivel capabilities at different points of the monitor arm.
Video: Freelift Pro Dual Monitor Arm Function - Demonstrates the full range of motion, including tilt, swivel, and rotation.
5.2 ගෑස් වසන්ත ආතති ගැලපීම
The gas spring tension may need adjustment depending on your monitor's weight. Use the provided Allen key to adjust the tension screw located on the arm.
- To reduce tension (for lighter monitors or if arms are too stiff): Turn the screw clockwise (towards '-').
- To increase tension (for heavier monitors or if arms are falling down): Turn the screw counter-clockwise (towards '+').
Each turn needs to be a full 360 degrees. Hold the arm in a horizontal position during adjustment.
Image: Gas Spring Adjust - Provides a visual guide for adjusting gas spring tension and tilt.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates resetting spring tension from 1:06 to 1:11.
6. කේබල් කළමනාකරණය
Route your monitor cables through the integrated cable management channels on the arms to maintain a tidy workspace.
Image: Organize Wires and Tools - Shows how to manage cables and store Allen keys within the arm for convenience.
Video: Freelift Pro Dual Monitor Arm Installation - This video demonstrates cable management from 0:57 to 1:02.
7. නඩත්තු කිරීම
- සියලුම ඉස්කුරුප්පු සහ සම්බන්ධතා තදින් සහ ආරක්ෂිත බව සහතික කිරීම සඳහා නිතිපතා පරීක්ෂා කරන්න.
- Clean the monitor mount with a soft, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක වලින් වළකින්න.
- Periodically re-adjust gas spring tension if monitors feel too loose or too stiff over time.
8. දෝශ නිරාකරණය
If you encounter any issues with your monitor mount, refer to the common problems and solutions below:
8.1 Arms Falling Down / Can't Rise Up
This indicates that the gas spring tension is too low for your monitor's weight. Increase the tension by turning the adjustment screw counter-clockwise ('+') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.2 Arms Rising Up / Can't Fall Down
This indicates that the gas spring tension is too high for your monitor's weight. Decrease the tension by turning the adjustment screw clockwise ('-') with the provided Allen key. Ensure each turn is a full 360 degrees.
8.3 Monitors Face Down / Can't Be Adjusted Tilt
The tilting bolt may be too tight. Loosen the tilting bolt (towards '-') with an Allen key, adjust the monitor to your desired angle, then retighten the bolt (towards '+') to fix the angle.
8.4 Swivels Left and Right is Loose / Monitor Can't Swivel
Adjust the tightness of the swivel screw using an Allen key. Tighten or loosen as needed to achieve the desired swivel resistance.
Video: Freelift Pro Dual Monitor arm trouble shooting - This video provides visual guidance for adjusting tension, tilt, and swivel to resolve common issues.
9. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| අනුකූල මොනිටර ප්රමාණය | 22" - 32" (flat or curved LCD) |
| බර ධාරිතාව (බාහුවකට) | රාත්තල් 4.4 - 22 (කිලෝග්රෑම් 2 - 10) |
| VESA අනුකූලතාව | 75x75mm, 100x100mm |
| ඇල පරාසය | +85 ° සිට -45 ° දක්වා |
| ස්විචල් පරාසය | 180° (at VESA plate), 360° (at arm joint), 270° (at base joint) |
| භ්රමණය | 360° |
| Max Height (from desk) | අඟල් 17.3 |
| Max Extension (per arm) | අඟල් 21 |
| සවි කිරීමේ විකල්ප | සී-ක්ලබ්amp, ග්රොමෙට් |
| සී-ක්ලබ්amp මේසයේ ඝණකම | 0.39'' - 2.76'' |
| ග්රෝමට් මේස ඝණකම | 0.39'' - 2.76'' |
| ග්රෝමට් සිදුරු විෂ්කම්භය | 0.39'' - 2.36'' |
| ද්රව්ය | ඇලෝයි වානේ |
Image: Perfect For Your Screen - Overview of product compatibility including load capacity, screen size, and VESA patterns.
10. වගකීම් සහ සහාය
For warranty information or technical support, please refer to the product packaging or contact MOUNTUP customer service directly. Keep your purchase receipt for warranty claims.