Baseus Super Energy Pro+ Jump Starter Powerbank User Manual

1. හැඳින්වීම

The Baseus Super Energy Pro+ Jump Starter Powerbank is a versatile device designed to jump-start 12V vehicles and serve as a portable power bank for electronic devices. It features a 12,000mAh battery capacity and a peak current of 1200A, suitable for various vehicle types.

Image 1.1: Baseus Super Energy Pro+ Jump Starter Powerbank shown with different vehicle types, illustrating its broad compatibility.

2. නිෂ්පාදන අවසන්view සහ විශේෂාංග

This device combines the functionality of a car jump starter and a power bank. Key features include:

• ඉහළ උච්ච ධාරාව: Provides up to 1200A peak current for effective vehicle starting.
• බැටරි ධාරිතාව: 12,000mAh / 44.4Wh for multiple uses.
• බහු-ක්‍රියාකාරී: Serves as both a jump starter and a portable power bank.
• සංඛ්යාංක දර්ශකය: බැටරි ආරෝපණ මට්ටම පෙන්නුම් කරයි.
• හදිසි LED ආලෝකය: Features multiple lighting modes for safety.
• ප්‍රතිලෝම ධ්‍රැවීයතා ආරක්‍ෂාව: Integrated safety mechanism to prevent damage from incorrect connections.
• පුළුල් අනුකූලතාව: Suitable for 12V vehicles with engines up to 8L (diesel) or 3.5L (gasoline).

Image 2.1: The jump starter displaying its digital battery percentage and highlighting its 1200A peak current capability.

Image 2.2: Visual representation of the 1200A high current output, powered by a 3-battery system.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• 1x Baseus Super Energy Pro+ Jump Starter Powerbank
• 1x Power Cable (USB-C)
• 1x Car Cable (EC5/Clamps)

4. Getting Started: Charging the Device

Before initial use, fully charge the jump starter. It is recommended to keep the device charged above 50% for optimal performance.

1. Connect the provided USB-C power cable to the jump starter's input port.
2. USB-C කේබලයේ අනෙක් කෙළවර අනුකූල USB බල ඇඩැප්ටරයකට සම්බන්ධ කරන්න (ඇතුළත් කර නැත).
3. The digital display will show the charging progress. Charge until the display indicates 100%.

රූපය 4.1: පැත්ත view of the jump starter, illustrating the various ports for charging and output.

5. මෙහෙයුම් උපදෙස්

5.1. Jump Starting Your Vehicle

Ensure the jump starter is sufficiently charged before attempting to start a vehicle.

1. Connect the Smart Ignition Terminals: Insert the smart ignition terminals (EC5 connector) into the jump starter's EC5 interface. The indicator lights on the terminals will flash red and green, indicating readiness.
2. කාර් බැටරියට අමුණන්න: Open the car's hood. Connect the red clamp කාර් බැටරියේ ධනාත්මක (+) පර්යන්තයට සහ කළු clamp සෘණ (-) පර්යන්තයට.
3. මෝටර් රථය ආරම්භ කරන්න: Return to the vehicle and start the engine.
4. විසන්ධි කරන්න: Once the car starts, immediately disconnect the jump starter from the car battery. First remove the clamps from the battery terminals, then disconnect the smart ignition terminals from the jump starter.

Image 5.1: A user connecting the jump starter clamps to a car battery, demonstrating the correct procedure.

5.2. බලශක්ති බැංකුවක් ලෙස භාවිතා කිරීම

The jump starter can charge mobile phones, tablets, and other USB-powered devices.

• Connect your device's charging cable to one of the USB-A output ports on the jump starter.
• පැනීමේ ආරම්භකය ඔබගේ උපාංගය ස්වයංක්‍රීයව ආරෝපණය කිරීම ආරම්භ කරයි.

5.3. Using the Emergency LED Light

The built-in LED light offers multiple modes for various situations.

• Press and hold the power button to turn on the emergency lighting mode.
• Press the power button again to cycle through SOS mode and Strobing mode.
• Press and hold the power button again to turn off the light.

Image 5.2: The jump starter's emergency LED light illuminating an engine bay, showing its utility in low-light conditions.

6. ආරක්ෂිත පූර්වාරක්ෂාවන්

• Do not short-circuit the jump starter.
• Do not expose the device to extreme temperatures (above 60°C or below -20°C).
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
• උපාංගය විසුරුවා හැරීම හෝ වෙනස් කිරීම නොකරන්න.
• Ensure correct polarity when connecting to a car battery. The smart clamps feature reverse polarity protection, which will trigger an alarm if connected incorrectly.
• Disconnect the jump starter immediately after the vehicle starts.

Image 6.1: Close-up of the smart clamps, emphasizing the built-in reverse polarity protection feature.

7. නඩත්තු කිරීම හා ගබඩා කිරීම

• ජම්ප් ස්ටාර්ටරය සෘජු හිරු එළියෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
• Charge the device every 3-6 months if not in regular use to maintain battery health.
• මෘදු වියළි රෙද්දකින් උපාංගය පිරිසිදු කරන්න. රළු රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ ද්‍රව්‍ය භාවිතා නොකරන්න.

8. දෝශ නිරාකරණය

• උපාංගය ක්‍රියාත්මක නොවේ: Ensure the device is charged. If the battery level is very low, it may require a few minutes of charging before it can power on.
• වාහනය පණ ගැන්වී නොමැති වීම: cl එක පරීක්ෂා කරන්නamps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the jump starter has sufficient charge. The vehicle's battery may be severely discharged or damaged, requiring professional assistance.
• Reverse polarity alarm: ස්මාර්ට් cl නම්amps emit a buzzing sound, disconnect them immediately and re-attach them to the correct battery terminals.
• ආරෝපණය මන්දගාමී වීම හෝ කිසිසේත්ම නොවීම: Ensure the charging cable and adapter are functioning correctly.

9. තාක්ෂණික පිරිවිතර

Image 9.1: Display of various international certifications for the product, ensuring compliance and safety standards.

10. වගකීම් සහ සහාය

For warranty information or technical support, please refer to the official Baseus webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔබේ ප්‍රදේශයේ සිල්ලර වෙළෙන්දා අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.