Fanvil 8-Port 2-Wire PoE Switch

1. හැඳින්වීම

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Fanvil 8-Port 2-Wire PoE Switch (Model PN8). Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

2. නිෂ්පාදන අවසන්view

The Fanvil PN8 is an 8-port 2-wire Power over Ethernet (PoE) switch designed to transmit both power and data over existing 2-wire cables. This unique capability simplifies installation, especially in environments where traditional Ethernet cabling is not feasible or cost-effective. It supports up to 8 PoE-enabled devices and can transmit data and power over distances up to 300 meters.

2.1 ප්රධාන ලක්ෂණ

• 8 PoE ports for data and power transmission.
• Supports power and data over 2-wire connections.
• Long transmission distance of up to 300 meters.
• User-friendly setup with no complex configuration required.

2.2 උපාංග පිරිසැලසුම

රූපය 1: ඉදිරිපස view of the Fanvil PN8 switch, showing 8 PLC ports, a WAN port, ON/OFF switch, and LED indicators for Network Reset and Power.

රූපය 2: කෝණික view of the Fanvil PN8 switch, highlighting the side ventilation and port layout.

2.3 LED දර්ශක

• Network Reset (Green LED): Indicates network activity or status. A steady light typically means a stable connection, while blinking indicates data transmission.
• Power (Red LED): Illuminates when the device is powered on and receiving electrical current.

3. සැකසුම් උපදෙස්

3.1 පැකේජයේ අන්තර්ගතය

ස්ථාපනය කිරීමට පෙර, කරුණාකර සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• Fanvil 8-Port 2-Wire PoE Switch (PN8)
• බල ඇඩැප්ටරය
• පරිශීලක අත්පොත (මෙම ලේඛනය)
• සවිකරන උපාංග (ඇතුළත් කර ඇත්නම්)

3.2 ස්විචය සම්බන්ධ කිරීම

1. බල සම්බන්ධතාවය: Connect the provided power adapter to the power input port on the switch and then plug it into a standard electrical outlet (100-240V AC). Ensure the ON/OFF switch is in the OFF position before connecting power.
2. WAN සම්බන්ධතාවය: Connect your main network router or modem to the WAN port on the Fanvil PN8 switch using a standard Ethernet cable.
3. PoE උපාංග සම්බන්ධතාවය: Connect your 2-wire PoE-enabled devices (e.g., IP phones, cameras) to any of the 8 PLC ports on the switch. The switch will automatically detect and provide power and data to these devices.
4. බල ගැන්වීම: Flip the ON/OFF switch to the ON position. The Power LED should illuminate, indicating the switch is operational.

4. ස්විචය ක්‍රියාත්මක කිරීම

Once connected, the Fanvil PN8 switch operates automatically. It provides power and data to connected PoE devices without requiring additional configuration. The LED indicators provide visual feedback on the device's status.

4.1 බල ගැන්වීම සක්‍රිය / අක්‍රිය කිරීම

• To power on the switch, ensure the power adapter is connected and flip the ON/OFF switch to the 'ON' position. The red Power LED will light up.
• To power off the switch, flip the ON/OFF switch to the 'OFF' position. The red Power LED will turn off.

5. නඩත්තු කිරීම

To ensure optimal performance and longevity of your Fanvil PN8 switch, follow these maintenance guidelines:

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners. Ensure the device is powered off before cleaning.
• වාතාශ්රය: Ensure the switch is placed in a well-ventilated area. Do not block the ventilation openings on the sides of the device.
• පරිසරය: Avoid exposing the switch to extreme temperatures, high humidity, or direct sunlight.

6. දෝශ නිරාකරණය

If you encounter issues with your Fanvil PN8 switch, refer to the following table for common problems and solutions:

7. තාක්ෂණික පිරිවිතර

8. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Fanvil website. Contact their customer service for assistance with product issues, repairs, or further inquiries.