1. හැඳින්වීම
This manual provides instructions for the safe and proper installation, operation, and maintenance of your suptek Single Monitor Mount MD01AW. Please read this manual thoroughly before installation and keep it for future reference.
The suptek MD01AW is a single monitor desk mount featuring a gas spring arm for smooth and effortless adjustments. It is designed to enhance your ergonomic workspace by allowing flexible positioning of your monitor.
ගැළපුම
- තිර ප්රමාණය: අඟල් 13 සිට 32 දක්වා
- බර ධාරිතාව: රාත්තල් 4.4 සිට 19.8 දක්වා (කිලෝ ග්රෑම් 2 සිට 9 දක්වා)
- VESA අනුකූලතාව: 75x75mm සහ 100x100mm
Figure 1: suptek Single Monitor Mount MD01AW with a monitor. This image illustrates the product's load capacity (2-9kg), screen size compatibility (13"-32"), and VESA pattern (75x75/100x100mm).
2. පැකේජ අන්තර්ගතය
Please verify that all parts are present and undamaged before installation. If any parts are missing or damaged, contact suptek customer support.
- මොනිටර් බාහු එකලස් කිරීම
- මේසය Clamp පදනම
- Grommet Mount Base (optional)
- වීසා තහඩුව
- දෘඩාංග කට්ටලය (ඉස්කුරුප්පු, රෙදි සෝදන යන්ත්ර, ස්පේසර්)
- ඇලන් කීස්
- උපදෙස් අත්පොත
3 ආරක්ෂිත තොරතුරු
අවවාදයයි: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.
- උපරිම බර ධාරිතාව රාත්තල් 19.8 (කිලෝග්රෑම් 9) නොඉක්මවන්න.
- Ensure your desk surface is strong enough to support the combined weight of the mount and your monitor.
- Use only the provided hardware. If you are unsure about any part of the installation, consult a qualified professional.
- ස්ථාපනය අතරතුර ළමුන් සහ සුරතල් සතුන් ඈත් කර තබන්න.
- සියලුම ඉස්කුරුප්පු සහ සම්බන්ධතා ආරක්ෂිතව පවතින බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න.
4. පිහිටුවීම සහ ස්ථාපනය
The suptek MD01AW offers two installation methods: C-clamp සහ ග්රොමට් කන්ද.
Figure 2: Two installation options for the monitor mount. The C-clamp option is suitable for desk thicknesses of 10-70mm, and the grommet mount option is for desk thicknesses of 10-70mm with a hole diameter of 10-60mm.
4.1 C-Clamp ස්ථාපනය
- C-cl එක අමුණන්නamp base to the edge of your desk. Ensure the clamp is securely tightened to prevent movement. The C-clamp fits desks with a thickness of 10-70mm.
- Insert the main pole of the monitor arm into the C-clamp base. Tighten the securing screw.
4.2 ග්රෝමට් මවුන්ට් ස්ථාපනය
- If your desk has a grommet hole (10-60mm diameter) and a thickness of 10-70mm, use the grommet mount option.
- Thread the grommet base through the desk hole. Secure it from underneath the desk using the provided plate and nut.
- Insert the main pole of the monitor arm into the grommet base. Tighten the securing screw.
4.3 මොනිටරය සවි කිරීම
- Attach the VESA plate to the back of your monitor using the appropriate screws and spacers from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
- Slide the monitor (with the attached VESA plate) onto the VESA head of the monitor arm. Ensure it clicks into place or is secured with the locking screw.
Figure 3: Monitor attached to the suptek monitor arm. This image demonstrates how the mount accommodates monitor screens up to 32 inches, providing a comfortable viewing කෝණය.
5. මෙහෙයුම් සහ ගැලපීම්
The gas spring arm allows for flexible and smooth adjustments to achieve your desired monitor position.
Figure 4: Full adjustability of the monitor arm. The arm allows for tilt (±90°), swivel (±90°), and 360° rotation for optimal viewing.
5.1 ගෑස් වසන්ත ආතති ගැලපීම
The gas spring tension needs to be adjusted according to the weight of your monitor. Use the provided Allen key to adjust the tension screw located on the arm.
- If the monitor falls down, turn the screw clockwise (+) to increase tension.
- If the monitor rises up too easily, turn the screw counter-clockwise (-) to reduce tension.
Figure 5: Easy gas spring adjustment. Turn the screw clockwise (+) to increase tension if the equipment falls down, or counter-clockwise (-) to reduce tension if the equipment raises up too easily.
5.2 Height, Tilt, Swivel, and Rotation
- උස ගැලපීම: Gently push or pull the monitor to the desired height. The gas spring will hold it in place once tension is correctly set.
- ඇලවීම: Tilt the monitor screen up or down (±80°) to reduce glare and optimize viewing කෝණය.
- කරකැවීම: Swivel the monitor left or right (±90°) to share your screen or adjust your viewතනතුර.
- භ්රමණය: Rotate the monitor 360° between landscape and portrait orientations.
5.3 කේබල් කළමනාකරණය
Route your monitor cables through the integrated cable management clips on the arm to maintain a tidy workspace.
Figure 6: Integrated cable management. Cables can be routed along the arm to keep the workspace neat and prevent wire entanglement.
6. නඩත්තු කිරීම
Regular maintenance ensures the longevity and safe operation of your monitor mount.
- පිරිසිදු කිරීම: මෘදු, d රෙදි කැබැල්ලකින් මවුන්ට් එක පිස දමන්න.amp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක වලින් වළකින්න.
- සම්බන්ධතා පරීක්ෂා කරන්න: Periodically check all screws and bolts, especially those securing the mount to the desk and the monitor to the VESA plate, to ensure they are tight.
- ගෑස් ස්ප්රින්ග්: If the gas spring tension feels off, re-adjust it according to Section 5.1.
7. දෝශ නිරාකරණය
If you encounter issues with your monitor mount, refer to the following common problems and solutions.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Monitor sags or falls down | ගෑස් ස්ප්රින්ග් ආතතිය මොනිටරයේ බරට වඩා අඩුය. | Increase gas spring tension by turning the adjustment screw clockwise (+). Refer to Section 5.1. |
| Monitor floats up or is hard to push down | ගෑස් ස්ප්රින්ග් ආතතිය මොනිටරයේ බරට වඩා වැඩිය. | Decrease gas spring tension by turning the adjustment screw counter-clockwise (-). Refer to Section 5.1. |
| Mount is wobbly or unstable | මේසය clamp/grommet mount is not tightened sufficiently. | මේසය cl සහතික කරන්නamp or grommet mount is securely fastened to the desk. Check all connection points. |
| Monitor does not attach to VESA plate | Incorrect VESA screws or plate orientation. | Ensure you are using the correct VESA screws for your monitor and that the VESA plate is oriented correctly. |
8. පිරිවිතර
- වෙළඳ නාමය: suptek
- ආකෘතිය: MD01AW
- ද්රව්ය: ඇලෝයි වානේ
- වර්ණය: සුදු
- සවිකිරීමේ වර්ගය: Tabletop Mount (C-clamp හෝ ග්රොමෙට්)
- චලන වර්ගය: Rotate, Tilt, Swivel, Height Adjustment
- ගැළපෙන උපාංග: Monitors 13-32 inches
- බර ධාරිතාව: රාත්තල් 4.4 - 19.8 (කිලෝග්රෑම් 2 - 9)
- VESA අනුකූලතාව: 75x75mm, 100x100mm
- උපරිම ඇල කෝණය: අංශක 80
- Desk Thickness (C-clamp): 10-70 මි.මී
- මේස ඝණකම (ග්රොමට්): 10-70 මි.මී
- ග්රෝමට් සිදුරු විෂ්කම්භය: 10-60 මි.මී
- අයිතමයේ බර: ආසන්න වශයෙන් පවුම් 4.76 (කිලෝ ග්රෑම් 2.16)
- පැකේජ මානයන්: ආසන්න වශයෙන් 15.12 x 7.99 x 4.25 අඟල්
9. වගකීම් සහ සහාය
suptek products are manufactured with quality and care. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official suptek website. Please have your model number (MD01AW) and purchase date available when contacting support.
