1 ආරක්ෂිත තොරතුරු
Before installing or operating the trimmer head, please read and understand all safety instructions. Failure to follow these instructions may result in serious injury.
- Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, long pants, and sturdy footwear, when working with string trimmers.
- Ensure the string trimmer's engine is off and the spark plug wire is disconnected before performing any installation, maintenance, or inspection.
- Keep hands, feet, and clothing away from the rotating trimmer head.
- Inspect the trimmer head for damage before each use. Do not use if damaged.
- Use only the recommended trimmer line size and type for your string trimmer and this head.
- Keep bystanders, especially children and pets, at a safe distance (at least 50 feet/15 meters) from the operating area.
2. නිෂ්පාදන අවසන්view
This INGQI Trimmer Head is designed as a replacement part for various string trimmer models, offering reliable performance for your lawn and garden maintenance tasks.
2.1 පැකේජයේ අන්තර්ගතය
- 1 x Trimmer Head (includes 1 x Roller, 1 x Hinge Pin, 1 x E-Ring Clip)
2.2 ගැළපුම
This trimmer head is compatible with a wide range of string trimmers. Please verify your specific model number against the list below:
- For Homelite String Trimmers: BCH20, BCH24, BCH32, BCH33, BCH40, BCH48, HBC20, HBC24, HBC32C, HBC33, HBC30, HBC38, HK15, HK18 (after 1/1/86), HK28, HK24 (after 1/1/86), HK25, HK30 (up to 1/86), HK33 (after 1/1/86), HK38, PBC3600, PBC3800, PBC4000, PLT3400, ST100, ST120, ST155, ST200, ST360, ST80, ST285, ST155, ST175, ST385, ST485, FK514, NBA524, PMB522, ST100, ST200, ST400, SXD20, RK521, TK518.
- For ECHO String Trimmers: GT200, GT225, GT225i, GT225L, GT225SF, GT230, GT251, GT100, GT140, GT160, GT1000, GT1100, GT2000, GT2100, GT2101, GT2102, GT2103, GT2200, GT2301, GT2400, PAS210, PAS211, PAS225, PAS225VP, PAS225VPB, PAS230, PAS231, PAS260, PAS261, PAS265, PAS266, PAS280, PAS2100, PAS2400, PAS2601, SRM 210, SRM 225, SRM 200, SRM 230, SRM 250, SRM 265, SRM 266, SRM 280, SRM 2100, SRM 2400, SRM140, SRM200, SRM202, SRM210, SRM230, SRM250, SRM251, SRM260, SRM261, SRM265, SRM266, SRM266S, SRM266T, SRM266U.
- For RedMax String Trimmers: BC220DL, BC221DL, BC300DL, BC2300DL, BK235FL, BK345FL, BK435FL, BK530DL, BC17, BC23.
- For Shiandaiwa String Trimmers: T195S, T220, T222, T230, T230s, T231, T242, T242X, T2510, T2510X, 22T, C230, C242, C2510.
රූපය 1: පැත්ත view of the INGQI Trimmer Head Replacement with pre-installed trimmer line.
3. ස්ථාපන උපදෙස්
Follow these steps to replace your old trimmer head with the new INGQI Trimmer Head. Always refer to your string trimmer's original manual for specific instructions if available.
3.1 අවශ්ය මෙවලම්
- Wrench (size may vary depending on your trimmer's shaft bolt)
- අත්වැසුම්
3.2 පියවරෙන් පියවර ස්ථාපනය
- ට්රයිමර් එක සූදානම් කරන්න: Ensure the string trimmer is turned off, the engine is cool, and the spark plug wire is disconnected to prevent accidental starting.
- පැරණි ට්රයිමර් හිස ඉවත් කරන්න: Locate the bolt or nut securing the old trimmer head to the trimmer shaft. Use a wrench to loosen and remove it. Some trimmers may have a locking pin to hold the shaft still while loosening. Turn the bolt/nut in the direction indicated by your trimmer's manual (often reverse thread).
- පිරිසිදු පතුවළ: Clean any debris or grass buildup from the trimmer shaft threads.
- නව ට්රයිමර් හිස ස්ථාපනය කරන්න: Align the new INGQI Trimmer Head with the trimmer shaft. The head typically screws onto the shaft. Ensure it is seated correctly.
- Secure the Head: Tighten the bolt or nut firmly. Do not overtighten, as this can damage the threads.
- ස්ථාපනය සත්යාපනය කරන්න: Gently tug on the trimmer head to ensure it is securely attached and does not wobble. Reconnect the spark plug wire.
රූපය 2: ඉහළ-පහළ view of the trimmer head, showing the central mounting point.
රූපය 3: කෝණික මුදුන view of the trimmer head, illustrating its compact design.
4. මෙහෙයුම් උපදෙස්
Once the trimmer head is securely installed, you can operate your string trimmer as usual. Always follow your trimmer's manufacturer guidelines for safe operation.
4.1 සාමාන්ය මෙහෙයුම
- Start the trimmer engine according to its instructions.
- අත් දෙකෙන්ම ට්රයිමරය තදින් අල්ලා ගන්න.
- Maintain a balanced stance and keep the trimmer head away from your body.
- Cut grass by swinging the trimmer head from side to side, using the tip of the line.
4.2 Line Feeding
This trimmer head typically uses a bump-feed mechanism. To advance the trimmer line:
- While the trimmer engine is running at full throttle, lightly tap the bottom of the trimmer head on a firm, flat surface (e.g., the ground).
- The impact will release a small amount of line. The trimmer's line-cutting blade (if equipped) will trim the line to the correct length.
- Repeat as necessary when the line becomes too short.
Figure 4: The trimmer head in use on a string trimmer, demonstrating its function during grass trimming.
5. නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ ට්රයිමර් හිසෙහි ආයු කාලය සහ ප්රශස්ත ක්රියාකාරිත්වය සහතික කරයි.
5.1 ට්රයිමර් රේඛාව ප්රතිස්ථාපනය කිරීම
When the trimmer line runs out, it needs to be replaced. This head is designed for easy line reloading.
- Turn Off Trimmer: ට්රයිමරය ක්රියා විරහිත කර ඇති බවත් ස්පාර්ක් ප්ලග් වයරය විසන්ධි කර ඇති බවත් සහතික කර ගන්න.
- Remove Old Line (if any): If there are short pieces of line remaining, pull them out.
- Align Head: Look for arrows or indicators on the trimmer head and align them. This typically aligns the internal spool with the line exit holes.
- Insert New Line: Take a length of new trimmer line (refer to your trimmer's manual for recommended diameter and length). Push one end of the line through one of the line exit holes and continue pushing it through the head until it comes out the opposite exit hole.
- Equalize Line: Pull the line through until an equal length extends from both sides of the trimmer head.
- Wind Line: Rotate the bump knob or the top of the trimmer head in the direction indicated by an arrow (usually clockwise) to wind the line into the spool. Keep winding until only about 6-8 inches of line extend from each side.
- තහවුරු කරන්න: Ensure the line is securely wound and both ends are extended.
රූපය 5: සමීප රූපය view of the trimmer head's side, highlighting the line exit points and the internal mechanism for line feeding.
5.2 පිරිසිදු කිරීම සහ ගබඩා කිරීම
- After each use, clean the trimmer head to remove grass clippings, dirt, and debris. This prevents buildup that can hinder performance.
- Use a stiff brush or cloth. Avoid using harsh chemicals that could damage the plastic.
- සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව, පිරිසිදු, වියළි ස්ථානයක කප්පාදු හිස ගබඩා කරන්න.
6. දෝශ නිරාකරණය
ඔබේ ට්රයිමර් හිස සමඟ ගැටළු ඇති වුවහොත්, පහත පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:
- පෝෂණය නොකරන රේඛාව:
- Check if the line is tangled or jammed inside the spool.
- Ensure the line is not fused together due to heat. Rewind the line if necessary.
- Verify that the line is of the correct diameter and type for the head.
- Trimmer Head Not Spinning:
- Ensure the trimmer head is securely attached to the shaft.
- Check for any obstructions (e.g., thick grass, debris) preventing rotation.
- Inspect the trimmer's drive shaft and clutch for issues (refer to your trimmer's manual).
- අධික කම්පනය:
- Ensure the trimmer line is evenly distributed and cut to equal lengths on both sides.
- Check if the trimmer head is properly balanced and securely mounted.
7. පිරිවිතර
- Part Numbers Replaced: 99944200907, 99944200902, 78890-30000, 78890-11000, 78890-18001
- ද්රව්ය: කල් පවතින ප්ලාස්ටික් සහ ලෝහ සංරචක
- වර්ගය: Bump-feed trimmer head
8. වගකීම් සහ සහාය
This product is manufactured to high-quality standards. If you encounter any issues or have questions regarding the installation, operation, or compatibility of your INGQI Trimmer Head Replacement, please contact the seller directly through your purchase platform. Provide your order details for prompt assistance. All parts are tested and quality controlled prior to shipment.
