LILYGO T5-4.7-S3 4.7 Inch E-Paper ESP32-S3 Development Board User Manual

1. හැඳින්වීම

The LILYGO T5-4.7-S3 is a versatile development board featuring a 4.7-inch E-Paper display and an ESP32-S3-WROOM-1 microcontroller. This board is designed for various applications requiring low-power display capabilities and robust wireless connectivity. This manual provides essential information for setting up, operating, and maintaining your device.

2 ආරක්ෂිත තොරතුරු

• Handle the board with care to avoid damage to electronic components.
• Avoid exposure to extreme temperatures, moisture, or static electricity.
• නිසි බල සැපයුම් පරිමාව සහතික කරන්නtage (typically 5V via USB-C) to prevent damage.
• Do not attempt to disassemble or modify the board beyond its intended use.
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.

3. පැකේජ අන්තර්ගතය

ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:

• LILYGO T5-4.7-S3 Development Board with 4.7-inch E-Paper Display
• ජම්පර් වයර්
• ශීර්ෂ කටු
• Battery Connector Cable

Figure 3.1: Contents of the LILYGO T5-4.7-S3 package.

4. නිෂ්පාදන අවසන්view

The LILYGO T5-4.7-S3 integrates an ESP32-S3-WROOM-1-N16R8 MCU with a 4.7-inch E-Paper display. Key features include:

• MCU: ESP32-S3-WROOM-1-N16R8
• තිරය: 4.7-inch E-Paper, 540 x 960 resolution, 16 gray levels, with touchscreen functionality.
• රැහැන් රහිත සම්බන්ධතාවය: Wi-Fi and Bluetooth V5.0.
• මතකය: 16MB Flash, 8MB PSRAM.
• තත්‍ය කාලීන ඔරලෝසුව (RTC): Supports PCF8563 RTC.
• බැටරි කළමනාකරණය: Includes battery capacity detection.
• අතුරුමුහුණත්: USB-C port for power and data, SD card slot, and various GPIO pins compatible with Raspberry Pi bus interface.

රූපය 4.1: ඉහළ view of the LILYGO T5-4.7-S3 board.

රූපය 4.2: ඉදිරිපස view of the LILYGO T5-4.7-S3 with e-paper display.

Figure 4.3: LILYGO T5-4.7-S3 E-Paper Board Pinout and Features.

4.1 E-Paper Display Characteristics

The 4.7-inch E-Paper display has specific characteristics:

• Due to the flexible nature of the screen, small bubbles may be present in the corners during fitting. This is a normal manufacturing characteristic.
• This version of the E-Paper screen may exhibit a slight yellowish tint.
• Partial refresh of the screen for extended periods can result in residual images (ghosting).

Figure 4.4: E-Paper Screen Notes.

5. පිහිටුවීම

To begin using your LILYGO T5-4.7-S3 board, follow these setup steps:

1. සම්බන්ධක බලය: Connect the board to a computer using a USB-C cable. The board will power on.
2. Initial Firmware Check: The board typically comes with factory test firmware. If the screen displays content, the hardware is likely functioning correctly.
3. ධාවක ස්ථාපනය කරන්න: Ensure your computer has the necessary USB-to-serial drivers for ESP32-S3 devices. These are usually automatically installed or can be found on the Espressif webඅඩවිය.
4. Prepare Development Environment: Install your preferred programming environment (Arduino IDE, VS Code with PlatformIO, or MicroPython). Refer to the official LILYGO GitHub repository for detailed setup instructions and examples: github.com/Xinyuan-LilyGO/LilyGo-EPD47/tree/esp32s3.

5.1 Firmware Flashing

To upload new firmware or examples, you will need to put the board into DFU (Device Firmware Upgrade) mode:

1. Connect the board to your computer via the USB-C cable.
2. ඔබා අල්ලාගෙන සිටින්න බූට් කරන්න බොත්තම.
3. තවමත් අල්ලාගෙන සිටියදී බූට් කරන්න button, briefly press the RST බොත්තම.
4. නිදහස් කරන්න RST බොත්තම.
5. නිදහස් කරන්න බූට් කරන්න බොත්තම.
6. The board is now in DFU mode and ready for firmware upload via your chosen development environment.

6. මෙහෙයුම් උපදෙස්

Once firmware is loaded, the operation of the LILYGO T5-4.7-S3 will depend on the specific application programmed onto it. Generally, interaction will be via the 4.7-inch touchscreen.

• ස්පර්ශ තිරය: Navigate menus and interact with applications by tapping or swiping on the capacitive touchscreen.
• බොත්තම්: The board may include physical buttons (e.g., RST, BOOT) that can be programmed for specific functions within your application.
• SD කාඩ්පත: Insert a microSD card into the slot for data storage or loading assets for your applications, such as maps or images.
• USB-C: Use the USB-C port for power, data transfer, and debugging.

6.1 නිample Application: Mesh Networking

The ESP32-S3's wireless capabilities can be utilized for mesh networking, allowing devices to communicate without traditional internet infrastructure. This is particularly useful in off-grid or emergency situations.

7. Programming Environment

The LILYGO T5-4.7-S3 board supports several popular programming environments:

• ආර්ඩුයිනෝ IDE: A user-friendly environment for beginners and experienced developers.
• VS Code (PlatformIO): A powerful and flexible environment for professional development.
• ක්ෂුද්‍ර පයිතන්: Allows programming the ESP32-S3 using Python.
• ESP-IDF: Espressif's official IoT Development Framework for advanced users.

For detailed guides, code examples, and libraries, visit the official LILYGO GitHub repository: github.com/Xinyuan-LilyGO/LilyGo-EPD47/tree/esp32s3.

8. නඩත්තු කිරීම

• පිරිසිදු කිරීම: Use a soft, dry cloth to clean the board and screen. Avoid abrasive materials or harsh chemicals.
• ගබඩා: Store the board in a cool, dry place, away from direct sunlight and extreme temperatures. The provided protective case () is recommended for storage.
• ස්ථිරාංග යාවත්කාලීන කිරීම්: Regularly check the LILYGO GitHub repository for firmware updates and improvements.

9. දෝශ නිරාකරණය

If you encounter issues with your LILYGO T5-4.7-S3 board, consider the following:

• No Display After Flashing: If the screen remains blank after uploading new firmware, ensure the firmware is compatible with the T5-4.7-S3 model. Try re-flashing the factory test firmware from the GitHub repository to verify basic hardware functionality.
• USB Port Not Recognized: Verify that the USB-C cable is functioning and properly connected. Ensure the correct drivers are installed on your computer. If using Arduino IDE, check that the correct board and COM port are selected.
• Application Not Working: Double-check your code for errors. Consult the examples and documentation on the LILYGO GitHub page.
• Screen Issues (Bubbles, Tint, Ghosting): Refer to the E-Paper Display Characteristics section (4.1) for expected behavior. These are often inherent to the e-paper technology.

For further assistance, refer to the FAQ section on the LILYGO GitHub page or contact LILYGO product support.

10. පිරිවිතර

Figure 10.1: LILYGO T5-4.7-S3 Board Dimensions.

11. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official LILYGO website or contact your retailer. LILYGO provides product service for any questions or suggestions regarding the product.