1. හැඳින්වීම
This manual provides essential information for the safe and effective use of your Ortur LU2-10A 10000mW Laser Module. Please read these instructions carefully before installation and operation. This laser module is designed for high-precision engraving and cutting with Ortur Laser Engravers.
2. පැකේජ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම සංරචක ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:
රූපය: විස්තරාත්මක view of all components included in the Ortur LU2-10A Laser Module package, such as the laser module, laser shield, air assist, various screws, cables, and tools.
- LU2-10A Laser Module
- Laser Shield
- ගුවන් සහාය
- ආධාරක බ්ලොක්
- ස්ලයිඩරය
- OUC2.0 හඳුන්වා දීම
- Small Coupling
- 24V 2A බල ඇඩැප්ටරය
- Dedicated LaserWire
- වායු පයිප්ප
- පයිප්ප සම්බන්ධකය
- Normal Adapter Cable
- Laser Backboard
- M3x5mm Screws*6 (Used for Slider)
- Thumb Screws*2
- M3x8mm Screws*4 (Used for OLM2S2)
- M3x12mm Screws*4 (Used for OLM2)
- කේබල් ටයි පටිය*10
- M3 Gasket*1
- යතුර
- කාච
- වායු ප්රවාහ නියාමකය
- OLM2/S2 OUC Exclusive Adapter Cable
3. පිහිටුවීම සහ ස්ථාපනය
This section guides you through the assembly and installation of the LU2-10A Laser Module onto your Ortur Laser Engraver. Ensure the engraver is powered off and disconnected from the power source before beginning installation.
3.1. Installation Tutorial Video
Video: A detailed installation tutorial for the Ortur Laser Master 2 Pro S2 LU2-10A, demonstrating step-by-step assembly and connection procedures.
3.2. Laser Module Installation Steps
- Attach the laser module to the engraver's carriage.
- Secure the laser module using the provided thumbscrews.
- Insert the 5-pin terminal of the dedicated laser line into the laser module's port.
- Connect the other end of the laser line to the appropriate port on the engraver's control board.
- Install the laser shield onto the laser module to ensure eye protection during operation.
- Connect the air assist hose to the air intake port on the laser module and to an external air pump (not included).
Image: The Ortur LU2-10A Laser Module actively cutting a piece of wood, demonstrating its operational capability.
4. මෙහෙයුම් උපදෙස්
The Ortur LU2-10A Laser Module offers powerful and precise capabilities for various materials.
4.1 ප්රධාන ලක්ෂණ
- පුළුල් අනුකූලතාව: Compatible with Ortur Laser Master 2, Ortur Laser Master 2 S2, Ortur Laser Master 2Pro S2, and Ortur Laser Master 3 Laser Engravers.
- ද්රව්ය බහුකාර්යතාව: Engrave and cut acrylic, metal, wood, stainless steel, glass, ceramics, leather, food, paper, fabric, and more.
- බලවත් ප්රතිදානය: True 10000mW laser output for effective cutting and engraving.
- ඉහළ නිරවද්යතාව: Compressed spot size of 0.05mm x 0.1mm for detailed work.
- ඉහළ කාර්යක්ෂමතාව: Lightweight design (235g) allows for engraving speeds up to 15000mm/min.
- Dual Fan Cooling: Optimized cooling system ensures stable long-term operation without overheating.
- ස්ථාවර මෙහෙයුම: 24V electrical system and high-quality cables support 24 hours of uninterrupted, consistent engraving.
4.2. කැටයම් කිරීමේ සහ කැපීමේ හැකියාවන්
The LU2-10A module is capable of cutting various materials with significant thickness:
- Up to 30mm acrylic.
- Up to 20mm wood.
Image: An internal diagram illustrating how two 5.5W laser beams are combined using light combing lenses to achieve a true 10W output with a precise 0.05 x 0.1mm compressed spot.
Image: The Ortur LU2-10A Laser Module highlighting its air intake for cooling and its lightweight design (only 235g), contributing to high engraving speeds.
රූපය: විනිවිද පෙනෙන view of the Ortur LU2-10A Laser Module, showing the internal arrangement of two 5.5W lasers combining to form a single 10W output beam.
Image: The Ortur LU2-10A Laser Module featuring its built-in air assist system, with an example showing a cleaner cut (labeled "Ours") compared to a cut without air assist (labeled "Other").
Image: A visual representation of the laser's compressed spot, showing its dimensions of 0.05mm x 0.1mm, which enables extreme precision in engraving.
5. නඩත්තු කිරීම
Regular maintenance ensures optimal performance and extends the lifespan of your laser module.
- කාච පිරිසිදු කිරීම: Periodically clean the laser lens with a soft, lint-free cloth and appropriate lens cleaning solution to prevent residue buildup that can affect laser performance.
- වායු ආධාරක තුණ්ඩය: Ensure the air assist nozzle is clear of debris to maintain effective airflow during cutting and engraving.
- සිසිලන පංකා: Check the dual cooling fans for dust accumulation and clean them gently to ensure proper heat dissipation.
- කේබල් පරීක්ෂාව: Regularly inspect all cables for any signs of wear, damage, or loose connections.
6. දෝශ නිරාකරණය
This section addresses common issues you might encounter with your Ortur LU2-10A Laser Module.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ලේසර් වෙඩි නොතබයි හෝ දුර්වල ප්රතිදානයක්. |
|
|
| Inconsistent engraving/cutting results. |
|
|
| Air assist not functioning. |
|
|
7. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| නිෂ්පාදන මානයන් | අඟල් 4.72 x 1.97 x 1.73 |
| අයිතම ආදර්ශ අංකය | Ortur-LaserMaster2-ProS2 (LU2-10A variant) |
| අයිතමයේ බර | රාත්තල් 1.54 කි |
| ලේසර් ප්රතිදාන බලය | 10000 මෙගාවොට් (10 වොට්) |
| Compressed Spot Size | 0.05mm x 0.1mm |
| කැටයම් වේගය | 15000mm/min දක්වා |
| සිසිලන පද්ධතිය | ද්විත්ව විදුලි පංකා සිසිලනය |
| විදුලි පද්ධතිය | 24V |
| ගැළපුම | Ortur Laser Master 2, 2 S2, 2Pro S2, 3 |
8. වගකීම් සහ සහාය
For warranty information, technical support, or further assistance, please refer to the official Ortur webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවය කෙලින්ම අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
Official Ortur Webඅඩවිය: www.ortur.net
