හැඳින්වීම
This manual provides detailed instructions for the GODIYMODULES TPA3116D2 Digital Power Amplifier Board. Designed for ease of use and high performance, this compact mono amplifier board features a TPA3116 digital power amplifier chip and an integrated volume potentiometer, making it suitable for a wide range of audio applications. Please read this manual thoroughly before operation to ensure proper setup and optimal performance.
විශේෂාංග
- Utilizes the TPA3116 digital power amplifier chip for efficient audio ampඉසිලීම.
- Compact design, ideal for space-constrained projects.
- Integrated volume potentiometer for convenient audio level adjustment.
- Supports a wide working voltage පරාසය DC 5V සිට 24V දක්වා.
- Delivers a maximum output power of 100W in mono configuration.
පිරිවිතර
| පරාමිතිය | වටිනාකම |
|---|---|
| වැඩ කරන වෙළුමtage | DC 5V-24V |
| Board Dimensions (L x W) | 45mm x 33mm (අඟල් 1.77 x 1.30) |
| Overall Height (approx.) | 22mm (අඟල් 0.87) |
| උපරිම නිමැවුම් බලය | 100W (මොනෝ) |
| චිප්සෙට් | TPA3116D2 |
| සවිකිරීමේ වර්ගය | මතුපිට සවි කිරීම |
| අයිතම ආදර්ශ අංකය | BTL-100WFYY-002 |
සැලසුම
Follow these steps to set up your TPA3116D2 Digital Power Ampලයිෆයර් මණ්ඩලය:
- බල සම්බන්ධතාවය: Connect a DC power supply within the 5V-24V range to the VCC and GND terminals. Ensure correct polarity to prevent damage.
- ශ්රව්ය ආදානය: Connect your audio source (e.g., smartphone, MP3 player) to the IN+ and IN- terminals.
- ස්පීකර් ප්රතිදානය: Connect your mono speaker to the OUT+ and OUT- terminals. Ensure the speaker impedance is compatible with the ampජීවිතාරක්ෂකයා.
රූපය: ඉහළට view හි amplifier board, highlighting the input (IN), output (OUT), and power (VCC) connection points.
Image: A pair of TPA3116D2 amplifier boards, showcasing their compact size and integrated volume control.
මෙහෙයුම් උපදෙස්
Once the board is correctly wired and powered on, you can begin operation:
- ශබ්ද ගැලපුම: Use the integrated potentiometer knob to adjust the output volume. Rotate clockwise to increase volume and counter-clockwise to decrease it.
- ශ්රව්ය නැවත ධාවනය: Start playing audio from your connected source. The amplifier will output the sound through the connected speaker.
රූපය: කෝණික view හි amplifier board, clearly showing the volume adjustment potentiometer.
නඩත්තු කිරීම
ඔබේ දිගුකාලීන පැවැත්ම සහ ප්රශස්ත කාර්ය සාධනය සහතික කිරීම සඳහා ampලිෆයර් පුවරුව, මෙම නඩත්තු මාර්ගෝපදේශ අනුගමනය කරන්න:
- වියළිව තබා ගන්න: Avoid exposing the board to moisture or liquids, which can cause short circuits and damage.
- මෘදු ලෙස පිරිසිදු කරන්න: පිරිසිදු කිරීම අවශ්ය නම්, මෘදු වියළි රෙද්දක් භාවිතා කරන්න. රළු රසායනික ද්රව්ය හෝ උල්ෙල්ඛ ද්රව්ය භාවිතා නොකරන්න.
- පරිස්සමින් හැසිරවීම: Avoid dropping or subjecting the board to strong impacts. When handling, minimize contact with electronic components to prevent static discharge.
- වාතාශ්රය: Ensure adequate airflow around the board, especially during extended operation, to prevent overheating.
දෝෂගවේෂණය
ඔබට ගැටළු ඇති වුවහොත් ඔබේ amplifier board, refer to the following common problems and solutions:
- බලය නැත:
- Check if the DC power supply is connected correctly and providing voltage within the 5V-24V range.
- Verify power supply polarity.
- ශබ්ද ප්රතිදානය නැත:
- Ensure the audio input source is active and connected properly to IN+ and IN-.
- Check speaker connections to OUT+ and OUT-.
- Confirm the volume potentiometer is not set to minimum.
- විකෘති ශබ්දය:
- Verify that the input audio signal is not too strong, causing clipping.
- Check the power supply for stability; insufficient current can cause distortion.
- ස්පීකර සම්බාධනය ගැලපෙන බවට වග බලා ගන්න ampජීවිතාරක්ෂක අවශ්යතා.
වගකීම් සහ සහාය
This product is covered by a standard return policy. If you are not satisfied with your purchase, you may be eligible for a return or replacement within 30 days of receipt, subject to the seller's terms and conditions.
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact the seller directly through the platform where the product was purchased. Provide your order details and a clear description of the issue for prompt assistance.
