XPG INVADER X MINI ATX Mid Tower PC Case Instruction Manual

හැඳින්වීම

Welcome to the XPG INVADER X MINI ATX Mid Tower PC Case instruction manual. This guide provides detailed information on the installation, operation, and maintenance of your new PC case. The INVADER X MINI is designed for compact, stylish, and powerful gaming rig builds, offering impressive compatibility with ATX motherboards and optimal airflow with five pre-installed ARGB fans.

Please read this manual thoroughly before beginning assembly to ensure proper installation and safe operation.

පැකේජයේ අන්තර්ගතය

සියලුම සංරචක පැකේජයේ ඇති බව තහවුරු කර ගන්න:

• XPG INVADER X MINI PC Case
• උපාංග පෙට්ටිය (ඉස්කුරුප්පු, කේබල් බැඳීම්, ස්ථාවරයන් ආදිය)
• පරිශීලක අත්පොත (මෙම ලේඛනය)

ආරක්ෂිත පූර්වාරක්ෂාවන්

• කිසියම් සංරචකයක් ස්ථාපනය කිරීමට හෝ ඉවත් කිරීමට පෙර සෑම විටම බිත්ති අලෙවිසැලෙන් බල සැපයුම විසන්ධි කරන්න.
• හානි වළක්වා ගැනීම සඳහා සංරචක ප්‍රවේශමෙන් හසුරුවන්න.
• සංවේදී සංරචක වලට විද්‍යුත් ස්ථිතික විසර්ජන (ESD) හානි වැළැක්වීම සඳහා ප්‍රති-ස්ථිතික මැණික් කටු පටියක් පළඳින්න.
• Keep small parts and screws away from children.

සැකසුම සහ ස්ථාපනය

1. නඩුව සකස් කිරීම

Carefully remove the case from its packaging. Place it on a stable, flat surface. Remove the side panels by unscrewing the thumb screws at the rear of the case and sliding the panels off.

රූපය: ඉදිරිපස පැත්ත view of the XPG INVADER X MINI PC case, showcasing its tempered glass panels and the vibrant ARGB fans. This view highlights the compact elegance and panoramic design.

2. මවු පුවරු ස්ථාපනය

1. Install the I/O shield into the motherboard tray opening from the inside of the case.
2. Align your ATX motherboard with the pre-installed standoffs. Ensure the screw holes on the motherboard match the standoffs.
3. සපයා ඇති ඉස්කුරුප්පු භාවිතයෙන් මවු පුවරුව සුරක්ෂිත කරන්න.

රූපය: අභ්‍යන්තර view of the PC case, illustrating the spacious motherboard tray and various mounting points for components. This image helps visualize the layout for component installation.

3. බල සැපයුම් ඒකකය (PSU) ස්ථාපනය

The INVADER X MINI supports rear-mount power supplies. Slide your PSU into the designated compartment at the rear bottom of the case and secure it with screws from the outside.

Image: Rear internal view of the PC case, highlighting the power supply mounting area and cable routing channels behind the motherboard tray. This demonstrates the design for clean cable management.

4. ගබඩා ධාවක ස්ථාපනය

Install 2.5" SSDs or 3.5" HDDs into the designated drive bays. Refer to the accessory box for specific mounting hardware.

රූපය: සවිස්තරාත්මක අභ්‍යන්තරය view of the PC case, focusing on the drive bays and fan mounting locations. This helps users identify where to install storage devices and additional cooling.

5. Graphics Card (GPU) and Expansion Card Installation

Remove the necessary PCIe slot covers from the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

Image: Rear exterior view of the PC case, showing the PCIe expansion slots, the rear exhaust fan, and the I/O panel cutout. This view is crucial for installing expansion cards and connecting peripherals.

6. කේබල් කළමනාකරණය

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics.

Image: Side internal view of the PC case, illustrating the pre-installed ARGB fans and the internal layout for component placement. This perspective helps in planning component installation and cable routing.

7. Connecting Front Panel I/O

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

Image: Top-down internal view of the PC case, showing the top fan mounts and the overall internal structure. This view is useful for understanding top-mounted radiator or fan installations.

Operating the PC Case

බල ගැන්වීම

Once all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable to the PC. Press the power button on the front panel of the case to turn on your system.

ARGB Fan Control

The XPG INVADER X MINI comes with five pre-installed ARGB fans. These fans can be controlled via your motherboard's ARGB software (if compatible) or a dedicated ARGB controller (if included or purchased separately). Refer to your motherboard manual or ARGB controller instructions for specific lighting effects and synchronization.

නඩත්තු කිරීම

දූවිලි පෙරහන පිරිසිදු කිරීම

The case is equipped with dust filters to prevent dust buildup inside. Regularly clean these filters (typically located at the top, front, and bottom) by removing them and gently brushing or washing them with water. Ensure they are completely dry before re-installing.

සාමාන්ය පිරිසිදු කිරීම

මෘදු, ඩී භාවිතා කරන්නamp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass panels.

දෝෂගවේෂණය

• පද්ධතිය ක්‍රියාත්මක නොවේ: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check the power switch connection to the motherboard. Verify the PSU is switched on.
• Fans Not Spinning/ARGB Not Lighting Up: Check fan power connections to the motherboard or fan controller. Ensure ARGB headers are correctly connected and software is configured.
• සංදර්ශක ප්‍රතිදානයක් නැත: Confirm the graphics card is properly seated in its PCIe slot and has adequate power. Ensure the monitor cable is connected to the graphics card, not the motherboard's integrated graphics ports (unless using integrated graphics).
• අධික උනුසුම් වීම: Verify all fans are spinning correctly and are oriented for optimal airflow (intake/exhaust). Ensure CPU cooler and GPU fans are functioning. Clean dust filters.

පිරිවිතර

වගකීම් සහ සහාය

XPG products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official XPG webඅඩවිය.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact XPG customer service through their official webවෙබ් අඩවිය හෝ ඔබේ නිෂ්පාදනයේ ලියකියවිලිවල සපයා ඇති සම්බන්ධතා තොරතුරු.

Please have your product model number (INVADER X MINI) and serial number ready when contacting support.