SINOTIMER DDS6619

SINOTIMER DDS6619 Din Rail Single Phase Energy Meter User Manual

Model: DDS6619

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter. This device is designed for measuring active energy consumption in single-phase AC systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.

SINOTIMER DDS6619 Din Rail Single Phase Energy Meter front view

රූපය 1: ඉදිරිපස view of the SINOTIMER DDS6619 Din Rail Single Phase Energy Meter, showing the LCD display and terminal connections.

2 ආරක්ෂිත තොරතුරු

Please observe the following safety precautions to prevent injury and damage to the device:

3. පැකේජ අන්තර්ගතය

පැකේජය විවෘත කිරීමෙන් පසු, කරුණාකර සියලුම අයිතම පවතින බවත් හානි වී නොමැති බවත් තහවුරු කරගන්න:

4. නිෂ්පාදන ලක්ෂණ

The DDS6619 energy meter offers a range of features for efficient power monitoring:

DDS6619 display modes showing temporary and total readings for kWh, voltage, current, power, frequency, and power factor

Image 2: Illustration of the DDS6619 display modes, demonstrating how temporary and total readings for various electrical parameters are shown.

5. පිහිටුවීම සහ ස්ථාපනය

5.1 මානයන්

The meter is designed for standard DIN rail mounting. Refer to the dimensions below for proper planning:

DDS6619 dimensions showing width 36.3mm, height 78.5mm, and depth 65.8mm

Image 3: Dimensional drawing of the DDS6619 meter, indicating its width (36.3mm), height (78.5mm), and depth (65.8mm) for installation planning.

5.2 සවි කිරීම

  1. Ensure the main power supply is turned off at the circuit breaker before proceeding.
  2. Mount the DDS6619 meter onto a standard 35mm DIN rail in your electrical panel.
  3. Ensure the meter is securely fastened to prevent movement.

5.3 රැහැන් සටහන

Follow the wiring diagram carefully. Incorrect wiring can cause damage to the meter or electrical system.

DDS6619 wiring diagram showing L and N connections for input and output

Image 4: Wiring diagram for the DDS6619 meter, illustrating the correct connections for live (L) and neutral (N) input and output terminals.

  1. Connect the incoming Live (L) wire to the terminal marked 'L' on the input side.
  2. Connect the incoming Neutral (N) wire to the terminal marked 'N' on the input side.
  3. Connect the outgoing Live (L) wire to the terminal marked 'L' on the output side.
  4. Connect the outgoing Neutral (N) wire to the terminal marked 'N' on the output side.
  5. Double-check all connections for tightness and correctness before restoring power.

6. මෙහෙයුම් උපදෙස්

6.1 බලය ක්‍රියාත්මකයි

After successful installation and wiring, restore power to the circuit. The meter's LCD display will illuminate, showing the current readings.

6.2 සංදර්ශක මාතයන්

The meter features a dual-row display. The top row cycles through various temporary electrical parameters, while the bottom row consistently shows the total power consumption (kWh).

6.3 Reset Function for Temporary kWh

The temporary kWh reading can be reset to zero for monitoring consumption over specific periods.

DDS6619 reset function explanation showing temporary and total power consumption and reset button

Image 5: Diagram illustrating the reset function. The top display shows temporary power consumption (resettable), the bottom shows total power consumption (not resettable), and indicates to hold the reset button for 6 seconds.

  1. Locate the reset button on the front panel of the meter.
  2. Press and hold the reset button for approximately 6 seconds.
  3. The temporary kWh value on the top display will reset to zero. The total power consumption on the bottom display will remain unchanged.

7. පිරිවිතර

පරාමිතියවටිනාකම
ආකෘතියDDS6619
ශ්‍රේණිගත කළ වෙළුමtage120VAC
ශ්‍රේණිගත ධාරාව5(80)ඒ
සංඛ්යාතය60Hz
නිරවද්යතා පන්තිය1.0
ප්රදර්ශනය කරන්නනිල් පසුබිම් ආලෝකය සහිත LCD
සවි කිරීම35mm DIN රේල්
ද්රව්යගිනි ආරක්ෂණ ඒබීඑස්
පැකේජ මානයන්අඟල් 2.72 x 1.65 x 0.63
බරඅවුන්ස 0.48 කි

8. නඩත්තු කිරීම

The DDS6619 energy meter requires minimal maintenance. Follow these guidelines to ensure its longevity:

9. දෝශ නිරාකරණය

If you encounter issues with your DDS6619 meter, refer to the following common problems and solutions:

ගැටලුවවිය හැකි හේතුවවිසඳුම
No display/Meter not powering onNo power supply; Incorrect wiring; Faulty meterCheck power supply to the circuit. Verify wiring connections according to the diagram. If problem persists, contact support.
වැරදි කියවීම්Incorrect wiring; Overload; External interferenceRe-check wiring. Ensure load does not exceed meter's maximum current rating. Isolate from strong electromagnetic fields.
Temporary kWh not resettingReset button not held long enoughPress and hold the reset button for a full 6 seconds.
Total kWh reading is zero or incorrectIncorrect wiring; Meter malfunctionVerify wiring. Note that total kWh cannot be reset. If consistently incorrect, contact support.

10. වගකීම් සහ සහාය

SINOTIMER products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official SINOTIMER webඅඩවිය.

ඔබට වැඩිදුර තොරතුරු සහ සම්බන්ධතා තොරතුරු සොයා ගත හැක SINOTIMER Store on Amazon.

අදාළ ලියකියවිලි - DDS6619

පෙරview SINOTIMER DDS6619 ශ්‍රේණි මාර්ගෝපදේශය රේල් මිනුම් ස්විච උපදෙස් අත්පොත
SINOTIMER DDS6619 ශ්‍රේණියේ මාර්ගෝපදේශක රේල් වර්ග මිනුම් ස්විච සඳහා උපදෙස් අත්පොත. තාක්ෂණික පිරිවිතර, රැහැන් ඇදීම, ස්මාර්ට් ලයිෆ්/ටූයා හරහා යෙදුම් පාලනය, මෙහෙයුම් උපදෙස් සහ ස්මාර්ට් බලශක්ති අධීක්ෂණය සඳහා ආරක්ෂක පූර්වාරක්ෂාවන් පිළිබඳ විස්තර.
පෙරview SINOTIMER SVP719 පරිශීලක අත්පොත: වෙළුමtage ආරක්ෂකය, බලශක්ති මීටරය සහ බල පරිභෝජන මොනිටරය
SINOTIMER SVP719 සඳහා වන පුළුල් පරිශීලක අත්පොත, එහි විශේෂාංග විස්තර කරන්නේ වෙනස් කළ හැකි අධි/අඩු පරිමාවක් ලෙස ය.tage ආරක්ෂකය, සර්ජ් ආරක්ෂකය, අධි ධාරා සීමා රිලේ සහ බල පරිභෝජනය නිරීක්ෂණය කිරීම සඳහා Watt/kWh ශක්ති මීටරයක්.
පෙරview DIN Rail සඳහා SINOTIMER TM-610 ඩිජිටල් කාල ස්විචය - පරිශීලක අත්පොත සහ පිරිවිතර
DIN රේල් සවි කිරීම සඳහා නිර්මාණය කර ඇති SINOTIMER TM-610 ඩිජිටල් කාල ස්විචය සඳහා සවිස්තරාත්මක පිරිවිතර, රැහැන් රූප සටහන් සහ මෙහෙයුම් උපදෙස්.
පෙරview SINOTIMER TM928 Series HD LCD ඩිජිටල් ටයිමර් ස්විචය - පරිශීලක අත්පොත සහ පිරිවිතර
TM919, TM920, TM928, TM928S, TM928R, සහ TM929 වැනි මාදිලි සඳහා විශේෂාංග, පිරිවිතර, සැකසුම සහ රැහැන් ආවරණය කරන SINOTIMER TM928 ශ්‍රේණියේ ඩිජිටල් ටයිමර් ස්විච සඳහා පුළුල් මාර්ගෝපදේශයක්.
පෙරview SINOTIMER TM929: Guía del Temporizador Analógico Diario de 24 Horas
el temporizador analógico diario SINOTIMER TM929 de 24 horas ගවේෂණය කරන්න. මෙම අත්පොත සමානුපාතික තොරතුරු විස්තරාත්මක තොරතුරු, විශේෂිත තාක්ෂණික සහ රූප සටහන් සහ රැහැන්ගත කිරීම සඳහා පහසු ස්ථාපනය සහ මෙහෙයුම්.
පෙරview SINOTIMER TM-630A/TM-630S ඩිජිටල් ටයිමරය: විශේෂාංග සහ පිරිවිතර
SINOTIMER TM-630A සහ TM-630S ඩිජිටල් වැඩසටහන්ගත කළ හැකි ටයිමර් සඳහා බල සැපයුම, කාල පරාසය, මානයන් සහ රැහැන් ඇතුළුව සවිස්තරාත්මක තාක්ෂණික පිරිවිතර සහ විශේෂාංග.