1. හැඳින්වීම
The BoxWave ClearTouch Crystal Screen Protector is designed to provide superior protection for your TWOSKY T801 Wireless Earbuds screen. This high-quality thermoplastic film shields your device from scratches, dust, and minor impacts, while maintaining up to 99% visual clarity for a vibrant viewing experience. This manual will guide you through the installation process and provide tips for optimal care.
2. පැකේජ අන්තර්ගතය
කරුණාකර ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:
- Two (2) ClearTouch Crystal Screen Protectors
- One (1) Applicator Card
- One (1) Microfiber Cleaning Cloth
- One (1) Dust Removing Sticker (if included in your specific kit)
Image: Contents of the ClearTouch screen protector package, showing two screen protectors, an applicator card, a microfiber cleaning cloth, and a dust removing sticker.
3. ස්ථාපන උපදෙස්
Follow these steps carefully for a bubble-free installation. Perform installation in a clean, dust-free environment.
- උපාංග තිරය පිරිසිදු කරන්න: Use the provided microfiber cleaning cloth to thoroughly clean the screen of your TWOSKY T801 Wireless Earbuds. Ensure there are no dust particles, smudges, or fingerprints. For stubborn marks, a slightly damp cloth followed by the dry microfiber cloth can be used.
- දූවිලි ඉවත් කරන්න: Use the dust removing sticker (if provided) to gently dab the screen surface, picking up any remaining dust particles. Ensure the screen is completely free of dust before proceeding.
- Peel Back Layer 1: Carefully peel back a small portion of the protective film labeled "Layer 1" (or similar) from one end of the screen protector. Avoid touching the adhesive side.
- ආරක්ෂකය පෙළගස්වන්න: Align the exposed adhesive edge of the screen protector with one edge of your TWOSKY T801 Wireless Earbuds screen. Take your time to ensure precise alignment with all cutouts and edges.
- Apply and Smooth: Slowly and steadily lower the rest of the screen protector onto the device screen while simultaneously using the applicator card to smooth out any air bubbles. Work from the aligned edge towards the opposite side, pushing bubbles outwards.
- Remove Layer 2: Once the screen protector is fully applied and smoothed, carefully peel off the top protective film labeled "Layer 2" (or similar).
- Final Smoothing: Use the microfiber cloth to gently wipe down the newly applied screen protector, removing any remaining small bubbles by pushing them towards the edges. Note: The low-tack adhesive may take up to 48 hours to fully settle along the edges. Any initial air bubbles typically clear with regular use.
Image: Visual guide for screen protector application, demonstrating the steps of peeling, aligning, and smoothing the film onto a device screen.
4. භාවිතය සහ රැකවරණය
To ensure the longevity and optimal performance of your ClearTouch Crystal Screen Protector:
- පිරිසිදු කිරීම: Use the provided microfiber cloth to gently wipe the screen protector. For smudges, lightly dampරෙදි කැබැල්ල වතුරෙන් හෝ තිර ආරක්ෂිත පිරිසිදුකාරකයකින් සෝදන්න. රළු රසායනික ද්රව්ය හෝ උල්ෙල්ඛ ද්රව්ය වලින් වළකින්න.
- ආරක්ෂාව: While the protector offers significant scratch resistance, avoid placing your earbuds with sharp objects (e.g., keys, coins) to prevent damage.
- නැවත භාවිතා කිරීමේ හැකියාව: The ClearTouch Crystal is designed with installation forgiveness, allowing for reuse and reinstallation if needed. Handle with care during removal and reapplication to avoid damage to the adhesive.
5. දෝශ නිරාකරණය
| කලාපය | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| වායු බුබුලු: Small bubbles remain after application. | Dust particles trapped underneath, or insufficient smoothing during application. | Gently push bubbles towards the nearest edge using the applicator card or microfiber cloth. For persistent bubbles caused by dust, carefully lift the nearest edge of the protector, remove the dust with a dust sticker, and reapply. Allow up to 48 hours for small bubbles to dissipate naturally. |
| නොගැලපීම: Protector is not perfectly centered or covers a sensor/camera. | නුසුදුසු ආරම්භක පෙළගැස්ම. | Carefully peel off the protector from one corner. Realign and reapply, ensuring all cutouts match the device. |
| Edges not adhering: Edges lift slightly. | Dust under the edge, or protector not fully settled. | Press down firmly on the lifting edge with the microfiber cloth. If dust is present, carefully lift the edge and remove it. Allow up to 48 hours for the adhesive to fully cure. |
6. පිරිවිතර
- නිෂ්පාදන නම: ClearTouch Crystal Screen Protector
- වෙළඳ නාමය: බොක්ස්වේව්
- ගැළපුම: TWOSKY T801 Wireless Earbuds
- ද්රව්ය: පොලිඑතිලීන් ටෙරෙෆ්තලේට් (PET)
- විනිවිදභාවය: 99% දක්වා
- Surface Description: දිලිසෙන
- පැකේජ ප්රමාණය: 2-පැක්
- අයිතමයේ බර: 0.7 ounces (approximate, for the package)
7. වගකීම් සහ සහාය
BoxWave products are designed for quality and performance. While specific warranty details may vary, most products come with a standard return policy. For issues or support, please refer to your purchase documentation or contact BoxWave customer service through their official webභාණ්ඩය මිලදී ගත් ස්ථානය හෝ සිල්ලර වෙළෙන්දා.
Typically, products are eligible for return within 30 days of purchase. Please check the specific return policy of your retailer for details.
