AstroAI L8 Portable Electric Bike Pump

1 ආරක්ෂිත තොරතුරු

Please read all safety instructions carefully before using the AstroAI L8 Portable Electric Bike Pump. Failure to follow these instructions may result in injury or damage to the device.

• උපකරණය දරුවන්ගෙන් ඈත් කරන්න.
• Do not expose the pump to extreme temperatures or direct sunlight for prolonged periods.
• Avoid using the pump in wet conditions or near flammable liquids/gases.
• Ensure the correct pressure is set for the item being inflated to prevent over-inflation, which can cause bursting and injury.
• Do not operate the pump continuously for more than 12 minutes. Allow it to cool down for at least 15 minutes after continuous use.
• This pump is not suitable for inflating car tires, Segways, or electric scooters.

2. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• 1 x AstroAI Electric Bike Pump
• 1 x Schrader Hose
• 1 x Presta Valve Adapter
• 1 x Dunlop Valve Adapter
• 1 x බෝල ඉඳිකටුවක්
• 1 x Type-C Charging Cable
• 1 x ගබඩා බෑගය
• 1 x පරිශීලක අත්පොත

3. නිෂ්පාදන අවසන්view

The AstroAI L8 Portable Electric Bike Pump is a compact and versatile tire inflator designed for various bicycles, e-bikes, motorcycles, and sports balls. It features a digital display, preset modes, and an auto-shutoff function for precise inflation.

Figure 3.1: AstroAI L8 Portable Bike Pump with included valve adapters.

The pump is equipped with a high-voltage motor for efficient inflation, capable of inflating a 700 x 35C city bike tire from 60 PSI to 80 PSI in approximately 35 seconds. Its lightweight and ergonomic design make it easy to carry and store.

Figure 3.2: Compact and portable design of the AstroAI L8 pump.

සංදර්ශකය සහ පාලනය

Figure 3.3: Dual-value LED display and control buttons.

The LED display shows both real-time and preset pressure values. Control buttons allow for mode selection, unit switching (PSI/BAR), and pressure adjustment.

4. උපාංගය ආරෝපණය කිරීම

The AstroAI L8 pump is equipped with a built-in lithium battery and supports Type-C charging. Before first use, fully charge the device.

1. Connect the provided Type-C charging cable to the pump's charging port.
2. කේබලයේ අනෙක් කෙළවර සුදුසු USB බල ඇඩැප්ටරයකට සම්බන්ධ කරන්න (ඇතුළත් කර නැත).
3. The battery indicator on the display will show charging status. Once fully charged, the indicator will show a full battery.

A single full charge can inflate up to 25 city bike tires (60–80 PSI).

5. Setup and Valve Adapters

The pump comes with a Schrader valve hose and adapters for Presta and Dunlop valves.

Attaching the Schrader Hose

1. Screw the Schrader hose securely onto the pump's air outlet.
2. For Schrader valves, directly connect the hose to the tire valve.

Using Presta and Dunlop Valve Adapters

For Presta or Dunlop valves, first install the appropriate adapter onto the tire valve, then connect the Schrader hose to the adapter.

• ප්‍රෙස්ටා කපාටය: Unscrew the Presta valve cap, then screw on the Presta valve adapter.
• ඩන්ලොප් කපාටය: Screw on the Dunlop valve adapter.

Figure 5.1: Included valve adapters for versatile use.

6. මෙහෙයුම

බලය සක්රිය / අක්රිය

• To turn on: Press and hold the Power Button for 3 seconds.
• To turn off: Press and hold the Power Button for 3 seconds, or the device will automatically shut off after a period of inactivity.

මාදිලිය තේරීම

The pump offers 5 preset modes and a custom mode. Press the 'M' button to cycle through the modes:

• නගර බයික්
• මවුන්ටන් බයික්
• මාර්ග බයිසිකලය
• මහත බයිසිකලය
• Custom Mode (for motorcycles, balls, etc.)

Figure 6.1: Available preset and custom inflation modes.

Setting Pressure and Inflation

1. After selecting a mode, use the '+' and '-' buttons to adjust the desired pressure.
2. Press the unit button to switch between PSI and BAR units.
3. Connect the hose to the tire valve (with adapter if necessary).
4. Press the Power Button to start inflation. The pump will display real-time pressure.
5. පෙර සැකසූ පීඩනය ළඟා වූ පසු පොම්පය ස්වයංක්‍රීයව නතර වේ.

Figure 6.2: Setting preset pressure and automatic shutoff feature.

The memory function saves your last pressure setting for convenience.

7. LED ෆ්ලෑෂ් ලයිට්

The AstroAI L8 pump includes a built-in LED light with three modes for enhanced visibility and safety:

• ස්ථාවර ආලෝකය: සාමාන්‍ය ආලෝකකරණය සඳහා.
• මන්දගාමී ෆ්ලෑෂ්: For signaling or increased visibility.
• Fast Flash (SOS): හදිසි අවස්ථා සඳහා.

To activate or change modes, press the flashlight button.

Figure 7.1: LED flashlight with three modes.

8. නඩත්තු කිරීම

• Clean the pump exterior with a soft, damp රෙදි. දරුණු රසායනික ද්රව්ය හෝ උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
• භාවිතයේ නොමැති විට සිසිල් වියළි ස්ථානයක පොම්පය ගබඩා කරන්න.
• ආරෝපණ වරාය දූවිලි හා සුන්බුන් වලින් තොර බවට වග බලා ගන්න.
• Regularly check the hose and adapters for any signs of wear or damage. Replace if necessary.

9. දෝශ නිරාකරණය

10. පිරිවිතර

11. වගකීම් සහ සහාය

The AstroAI L8 Portable Electric Bike Pump comes with a වසර 2ක නිෂ්පාදක වගකීම.

For technical support, warranty claims, or any questions regarding your product, please contact AstroAI customer service through their official webවෙබ් අඩවිය හෝ ඔබේ මිලදී ගැනීමේ ලියකියවිලිවල සපයා ඇති සම්බන්ධතා තොරතුරු.

12. නිෂ්පාදන වීඩියෝව