අත්පොත්+

ඩෝනර් EC7163

Donner Adjustable Piano Bench EC7163 Instruction Manual

මාදිලිය: EC7163

හැඳින්වීම

Thank you for choosing the Donner Adjustable Piano Bench, Model EC7163. This manual provides essential information for the proper assembly, operation, maintenance, and care of your piano bench. Please read these instructions thoroughly before use to ensure safe and optimal performance.

ආරක්ෂිත තොරතුරු

  • Always assemble the bench according to the provided instructions.
  • උපරිම බර සීමාව රාත්තල් 400 (කිලෝග්‍රෑම් 181) නොඉක්මවන්න.
  • To maintain the finish, avoid exposure to direct sunlight.
  • Always keep the bench on a stable, level surface to prevent tipping.
  • Be aware of the blue lubricant on the lifting mechanism during initial adjustments. It may transfer to surfaces if not wiped clean.

පැකේජයේ අන්තර්ගතය

එකලස් කිරීම ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

  • Piano Bench Seat with integrated lifting mechanism
  • 4 x Bench Legs
  • සවි කිරීමේ දෘඩාංග (බෝල්ට්, රෙදි සෝදන යන්ත්‍ර, ඇට වර්ග)
  • Wrench for assembly

එකලස් කිරීමේ උපදෙස්

Assembly of the Donner Adjustable Piano Bench is straightforward and requires minimal tools. Follow these steps:

  1. Turn the piano bench seat upside down, ensuring the bottom is facing upwards.
  2. Align each leg with the corner brackets on the underside of the bench.
  3. Insert the bolts through the leg and bracket, then thread the washers onto the bolts.
  4. Thread the nuts onto the bolts.
  5. Using the provided wrench, tighten all nuts securely. Ensure all legs are firmly attached and stable.
Four-step visual guide for assembling the Donner piano bench legs.
Figure 1: Visual guide for attaching the bench legs.
Detailed four-step assembly process for the piano bench legs, showing bolts, washers, and tightening with a wrench.
Figure 2: Step-by-step illustration of the leg assembly process.

මෙහෙයුම් උපදෙස්

Adjusting Bench Height

The Donner Adjustable Piano Bench features a metal lifting mechanism that allows for height adjustment. The seat height can be adjusted within a range of 18.9 inches (48 cm) to 22.8 inches (58 cm).

  1. Locate the adjustment knobs on both sides of the bench seat.
  2. Turn the knobs to raise or lower the seat to your desired height. Ensure both knobs are turned evenly to maintain a level seat.
  3. Once the desired height is achieved, ensure the knobs are tightened sufficiently to secure the seat in place.
Diagram illustrating the adjustable height mechanism of the Donner piano bench, showing minimum and maximum heights.
Figure 3: Height adjustment mechanism and range.
සමීප රූපය view of the side knob and lifting mechanism for height adjustment, showing a 3.9 inch adjustment range.
රූපය 4: සවිස්තරාත්මක view of the height adjustment knob.

නඩත්තු කිරීම

පිරිසිදු කිරීම

  • For the wooden frame, use a soft, dry cloth to wipe away dust and dirt. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
  • For the high-density sponge cushion, use a slightly damp cloth with mild soap if necessary, then wipe dry immediately. Do not saturate the cushion.
  • Regularly check the metal lifting mechanism for any dust or debris that might impede smooth operation.

සාමාන්ය සත්කාර

  • සියලුම බෝල්ට් සහ සම්බන්ධතා තදින් පවතින බව සහතික කිරීම සඳහා වරින් වර පරීක්ෂා කරන්න. අවශ්‍ය නම් නැවත තද කරන්න.
  • Keep the bench away from extreme temperature changes and high humidity to prevent warping or damage to the wood.
  • The non-slip rubber pads on the legs help protect your floor and provide stability. Ensure they are clean and intact.
සමීප රූපය view of the Donner piano bench highlighting metal support, solid wood construction, sponge cushion, and non-slip mat.
Figure 5: Components contributing to stability and comfort, including non-slip feet.
Image showing the non-slip foot pads on the bench legs, designed to increase friction and protect floors.
Figure 6: Non-slip design of the bench feet.

දෝෂගවේෂණය

Bench Feels Unstable

  • සියලුම කකුල් බෝල්ට් ආරක්ෂිතව තද කර ඇති බවට වග බලා ගන්න.
  • Verify that the bench is placed on a flat, level surface. Uneven floors can cause instability.
  • Check the non-slip pads on the bottom of the legs for wear or damage. Replace if necessary.

උස සකස් කිරීමේ අපහසුතාව

  • Ensure both adjustment knobs are loosened sufficiently before attempting to change the height.
  • Check for any obstructions in the lifting mechanism.
  • Apply a small amount of silicone-based lubricant to the metal parts of the lifting mechanism if it feels stiff. Wipe away any excess lubricant, especially the blue lubricant that may be present from manufacturing, to prevent staining.

පිරිවිතර

විශේෂාංගය විස්තර
ආදර්ශ අංකය EC7163
නිෂ්පාදන මානයන් 13.4"D x 25.2"W x 18.9"-22.8"H (Adjustable)
වර්ණය දුඹුරු
ද්රව්ය Solid Wood, High-Density Sponge Cushion
උපරිම බර ධාරිතාව රාත්තල් 400 (කිලෝග්‍රෑම් 181)
අයිතමයේ බර රාත්තල් 19.8 (කිලෝ ග්රෑම් 9)
ආසන ධාරිතාව 1
Image of the Donner piano bench with '400lb' text, emphasizing its weight capacity and solid wood construction.
Figure 7: Bench highlighting its 400lb weight capacity and solid wood construction.
Graphic illustrating the strong bearing force of the piano bench, stating it supports up to 400 pounds.
Figure 8: Illustration of the bench's strong bearing capacity.

වගකීම් සහ සහාය

For warranty information, technical support, or any inquiries regarding your Donner Adjustable Piano Bench, please visit the official Donner webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

Amazon හි Donner Store වෙත පිවිසෙන්න