හැඳින්වීම
Thank you for choosing the DUKWIN Single Watch Winder. This manual provides detailed instructions for the proper setup, operation, and maintenance of your watch winder. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
නිෂ්පාදන විශේෂාංග
- වාරික ඉදිකිරීම්: Crafted from vegan leather and metal for durability and a refined appearance.
- ද්විත්ව බල විකල්ප: Operates via AC power adapter or two 'AA' batteries (not included).
- Adjustable Watch Pillow: Accommodates watches with a dial up to 58mm, thickness up to 20mm, and bracelet/wrist diameter from 35-62mm. Features a detachable part for smaller watches.
- Multiple Rotation Settings: Offers 5 Turns Per Day (TPD) settings (650/750/850/1000/1950) and 3 directional modes (clockwise, counter-clockwise, bi-directional).
- නිහඬ මෙහෙයුම: Equipped with a Japanese Mabuchi motor for quiet performance.
- USB DC Connectivity: Allows multiple watch winders to be connected and operated simultaneously using a single power source.
පැකේජයේ අන්තර්ගතය
කරුණාකර පහත අයිතම සඳහා පැකේජය පරීක්ෂා කරන්න:
- 1 x DUKWIN Single Watch Winder
- 1 x AC විදුලි රැහැන්
- 1 x බල ඇඩැප්ටරය
- 1 x පරිශීලක අත්පොත (මෙම ලේඛනය)
රූපය 1: පැකේජයේ අන්තර්ගතය
සැලසුම
- Unpack the Winder: ඇසුරුම්කරණයෙන් සියලුම සංරචක ප්රවේශමෙන් ඉවත් කරන්න.
- බල ප්රභවය තෝරන්න:
- AC බලය: Connect the AC power cord to the adapter, then plug the adapter into the DC 5V input port on the back of the winder. Plug the adapter into a wall outlet.
- බැටරි බලය: Open the battery compartment on the back of the winder and insert two 'AA' batteries, ensuring correct polarity. Close the compartment. Note: Do not use AC power and batteries simultaneously.
- ඔරලෝසුව ඇතුළු කරන්න: Adjust the watch pillow as needed (see 'Watch Pillow Adjustment' section) and securely place your automatic watch onto the pillow. Insert the pillow with the watch into the winder's rotation slot.
Figure 2: Rear Panel with Power Options and Controls
මෙහෙයුම
The DUKWIN Single Watch Winder features two control knobs on the back for setting rotation direction and Turns Per Day (TPD).
Rotation Direction Control Switch
Use the left knob to select the rotation mode:
- අක්රියයි: Turns the winder off.
- දක්ෂිණාවර්තව: Rotates the watch in a clockwise direction.
- වාමාවර්තව: Rotates the watch in a counter-clockwise direction.
- Bi-directional (Clockwise/Counter-clockwise): Alternates between clockwise and counter-clockwise rotation.
- Fixed Winding Mode: A specific pre-set rotation pattern.
Turns Per Day (TPD) Control Switch
Use the right knob to select the desired TPD setting:
- 650 TPD
- 750 TPD
- 850 TPD
- 1000 TPD
- 1950 TPD
Consult your watch manufacturer's recommendations for the appropriate TPD and rotation direction for your specific automatic watch model.
Figure 3: Rotation and TPD Settings
Video 1: DUKWIN Single Watch Winder with 5 TPD Settings. This video demonstrates the various TPD settings and rotation modes available on the watch winder.
Watch Pillow Adjustment
The watch pillow is designed to be adjustable to fit a wide range of watch sizes. It can accommodate watches with a maximum dial size of 58mm, a maximum thickness of 20mm, and a bracelet/wrist diameter between 35mm and 62mm.
To adjust the pillow for smaller watches, gently push out the removable part at the bottom of the pillow. This reduces the circumference, allowing for a snug fit for watches with shorter bands.
Figure 4: Adjustable Watch Pillow Details
නඩත්තු කිරීම
- පිරිසිදු කිරීම: Wipe the exterior of the watch winder with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- ස්ථානගත කිරීම: Place the winder on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity.
- බැටරි ආදේශනය: If using battery power, replace 'AA' batteries when the winder's performance diminishes. Remove batteries if the winder will not be used for an extended period.
- Watch Placement: Always ensure the watch is securely placed on the pillow to prevent damage during rotation.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Winder is not rotating. | No power, incorrect power source, or OFF mode selected. | Check AC adapter connection or battery installation. Ensure the rotation control switch is not set to OFF. |
| Watch is not winding properly. | Incorrect TPD or rotation direction for the watch. | Refer to your watch's manual for recommended TPD and direction. Adjust the winder settings accordingly. |
| Winder makes unusual noise. | Watch not properly seated, or internal issue. | Ensure the watch is securely placed on the pillow. If noise persists, contact customer support. |
| Winder stops intermittently. | Low battery power (if using batteries). | Replace 'AA' batteries. |
පිරිවිතර
- ආදර්ශ අංකය: BW-YS22D-OR-1US
- මානයන්: ආසන්න වශයෙන් 10 x 10 x 13.6 cm (අඟල් 3.94 x 3.94 x 5.35)
- බර: ආසන්න වශයෙන් කිලෝග්රෑම් 1.35 (රාත්තල් 2.98)
- බල සැපයුම: AC Adapter (DC 5V-2.0A output) or 2 x 'AA' Batteries (not included)
- මෝටර්: Japanese Mabuchi Motor
- TPD සැකසුම්: 650, 750, 850, 1000, 1950
- Rotation Modes: Clockwise, Counter-clockwise, Bi-directional, Fixed Winding Mode
- නැරඹීමේ ගැළපුම: Max 58mm dial, Max 20mm thickness, 35-62mm bracelet/wrist diameter
වගකීම් සහ සහාය
DUKWIN offers a මාස 12ක වගකීමක් on this watch winder from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.
For warranty claims, technical support, or any questions regarding your DUKWIN Single Watch Winder, please contact DUKWIN customer service through the retailer where you purchased the product or visit the official DUKWIN webසම්බන්ධතා තොරතුරු සඳහා අඩවිය.
