1. නිෂ්පාදන අවසන්view
The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.
This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.
Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.
2. Fitment Information
මෙම ධාවන පුවරු විශේෂයෙන් නිර්මාණය කර ඇත්තේ:
- වාහනය: 2024-2026 Toyota Tacoma
- කැබ් රථ වර්ගය: Double Cab (4 full-size doors)
- ගැළපුම: Includes Hybrid models
Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.
Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.
3. පිහිටුවීම සහ ස්ථාපනය
3.1 ඇතුළත් සංරචක
ස්ථාපනය ආරම්භ කිරීමට පෙර, සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:
- රියදුරු පැති ධාවන පුවරුව
- මගී පැති ධාවන පුවරුව
- All necessary hardware and mounting brackets
- ස්ථාපන මාර්ගෝපදේශය (මෙම ලේඛනය)
3.2. ස්ථාපන පියවර
Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.
- වාහනය සූදානම් කරන්න: ඔබේ වාහනය සමතලා මතුපිටක නවතා වාහන නැවැත්වීමේ තිරිංග යොදන්න.
- සවිකිරීමේ ස්ථාන හඳුනා ගන්න: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
- වරහන් අමුණන්න: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
- Position Running Board: Carefully lift and align the running board with the attached brackets.
- Secure Running Board: Attach the running board to the brackets using the remaining hardware.
- සකස් කර තද කරන්න: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
- අනෙක් පැත්ත සඳහා නැවත කරන්න: Follow the same steps for the opposite side of the vehicle.
Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.
4. මෙහෙයුම් උපදෙස්
The Tyger Access Running Boards are designed for straightforward use. To operate:
- Ensure the running boards are securely installed before use.
- When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
- The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.
Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.
5. නඩත්තු කිරීම
To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:
- නිතිපතා පිරිසිදු කිරීම: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
- පරීක්ෂාව: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
- නිමාව ආරක්ෂාව: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.
Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.
6. දෝශ නිරාකරණය
If you encounter any issues with your running boards, consider the following:
- Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
- අසාමාන්ය ශබ්ද: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
- ස්ථාපනය කිරීමේ දුෂ්කරතා: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).
මෙම පියවරයන් මගින් විසඳා නොමැති අඛණ්ඩ ගැටළු සඳහා, කරුණාකර පාරිභෝගික සහාය අමතන්න.
7. පිරිවිතර
| ආදර්ශ අංකය | TG-AS2T24003 හඳුන්වා දීම |
| වෙළඳ නාමය | ටයිගර් ඔටෝ |
| ද්රව්ය | කාබන් වානේ |
| බාහිර නිමාව | Textured Black Powder E-Coating |
| අයිතම මානයන් (L x W x H) | අඟල් 76.69 x 7.24 x 5.59 |
| අයිතමයේ බර | රාත්තල් 39.2 කි |
| බර ධාරිතාව | රාත්තල් 500 කි |
| Ground Clearance (approx.) | අඟල් 15 |
| UPC | 810171270504 |
Image 7.1: Detailed dimensions of the Tyger Access Running Board.
Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.
8. වගකීම් තොරතුරු
Tyger Auto provides a වසර 5ක වගකීමක් for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.
9. සහාය
For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto webභාණ්ඩය මිලදී ගත් සිල්ලර වෙළෙන්දා හරහා ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න හෝ අමතන්න.
ඔබට වැඩිදුර තොරතුරු සහ සම්බන්ධතා තොරතුරු සොයා ගත හැක Tyger Auto Store on Amazon.
