1. හැඳින්වීම
This manual provides essential instructions for the proper setup, operation, and maintenance of your Keeson CU380 JLDK.30.03.20 adjustable bed base remote control. Please read this manual thoroughly before use to ensure correct functionality and to prevent any issues.
2. සැකසුම සහ යුගලනය
2.1 බැටරි ස්ථාපනය
The remote control requires 2 AAA batteries (not included). To install, slide open the battery compartment cover on the back of the remote. Insert the batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.
2.2 Remote Pairing Procedure
If your remote control is not already paired with your adjustable bed base, follow these steps:
- පියවර 1: Disconnect the power cord of your adjustable bed base from the electrical outlet. Wait approximately 5 seconds, then plug it back into the outlet.
- පියවර 2: Within 10 seconds of plugging in the power cord, locate the PAIR button on the back of the remote control. Press and hold this PAIR button. The button will illuminate blue and begin flashing.
- පියවර 3: Continue holding the PAIR button until it stops flashing and the LED light on the control box of your bed base goes out. Release the PAIR button. The remote is now paired with the adjustable base.
- පියවර 4: Test all remote functions to confirm successful pairing.
Image: Remote control pairing instructions, illustrating the steps to connect the remote to the bed base.
3. දුරස්ථ පාලකය ක්රියාත්මක කිරීම
The remote control provides intuitive buttons for adjusting your bed base. Familiarize yourself with the button layout and their corresponding functions:
- හිස ඉහළට/පහළට: Adjusts the head section of the bed.
- පාද ඉහළට/පහළට: Adjusts the foot section of the bed.
- පැතලි: Returns the bed to a flat position.
- Zero G: Activates the pre-programmed Zero Gravity position, designed to relieve pressure.
- Memory Presets (if available): Some remotes may have programmable memory buttons to save your favorite positions. Consult your bed base manual for specific instructions.
රූපය: ඉදිරිපස view of the Keeson CU380 JLDK.30.03.20 remote control, displaying buttons for head/foot adjustment, Zero G, and other functions.
4. නඩත්තු කිරීම
4.1 බැටරි ප්රතිස්ථාපනය
දුරස්ථ පාලකයේ ප්රතිචාරය මන්දගාමී වූ විට හෝ ක්රියා විරහිත වූ විට බැටරි ප්රතිස්ථාපනය කරන්න. සෑම විටම නව AAA බැටරි භාවිතා කර පැරණි බැටරි වගකීමෙන් යුතුව බැහැර කරන්න.
4.2 පිරිසිදු කිරීම
To clean the remote control, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
5. දෝශ නිරාකරණය
5.1 දුරස්ථ පාලකය ප්රතිචාර නොදක්වයි
- බැටරි නිවැරදිව ස්ථාපනය කර ඇති බවත් ඒවා ක්ෂය නොවන බවත් සහතික කර ගන්න. අවශ්ය නම් ප්රතිස්ථාපනය කරන්න.
- Verify the remote is properly paired with the bed base by following the pairing procedure in Section 2.2.
- Check that the bed base is plugged into a functional power outlet.
5.2 අනුකූලතා ගැටළු
This remote control is specifically designed for Keeson CU380 JLDK.30.03.20 adjustable bed bases. It is not a universal remote. Before purchasing or attempting to use, ensure your bed base's control box model number matches CU380 JLDK.30.03.20.
Image: Visual guide emphasizing the importance of verifying the control box model number and comparing it with the old remote for compatibility.
6. පිරිවිතර
- ආකෘතිය: CU380 JLDK.30.03.20
- ගැළපෙන උපාංග: Adjustable bed base (Keeson CU380 JLDK.30.03.20)
- බලශක්ති ප්රභවය: 2 AAA බැටරි (ඇතුළත් කර නැත)
- වර්ණය: කළු
- විශේෂ ලක්ෂණය: Not a universal remote
7. වගකීම් සහ සහාය
7.1 වගකීම් තොරතුරු
Specific warranty details for this remote control are not provided in the product information. Please refer to the documentation that came with your adjustable bed base or contact the original seller for warranty inquiries.
7.2 පාරිභෝගික සහාය
If you encounter issues not covered in this manual or require further assistance, please contact the seller or manufacturer of your adjustable bed base. When contacting support, provide detailed information about your bed base, control box, and the remote control, including any serial numbers or model identifiers.
