Sharkoon Rebel P10 850W ATX 3.1 බල සැපයුම් ඒකක පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides essential information for the safe and efficient use of your Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit (PSU). The Rebel P10 is designed to deliver reliable and efficient power to your personal computer, supporting the latest ATX 3.1 standard for compatibility with modern graphics cards. It features a quiet 120mm fan with a fluid dynamic bearing and flat cables to optimize airflow within your PC case.

2 ආරක්ෂිත තොරතුරු

Please read and understand all safety instructions before installing or operating the PSU. Failure to do so may result in personal injury or damage to your equipment.

• විදුලි උපද්රව: The PSU contains high voltage components. Do not open the PSU casinඋ. ඇතුළත පරිශීලක-සේවා කළ හැකි කොටස් නොමැත.
• වෘත්තීය ස්ථාපනය: Installation should be performed by a qualified technician or experienced user.
• වාතාශ්රය: Ensure adequate ventilation around the PSU. Do not block the fan or ventilation openings.
• පරිසරය: Operate the PSU in a dry, well-ventilated environment, away from moisture, dust, and extreme temperatures.
• භූගත කිරීම: Always connect the PSU to a grounded power outlet using the provided power cable.
• විදුලිය විසන්ධි කිරීම: Always disconnect the PSU from the mains power before performing any installation, maintenance, or troubleshooting.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• Sharkoon Rebel P10 850W ATX 3.1 Power Supply Unit
• AC බල කේබලය
• සවිකරන ඉස්කුරුප්පු
• පරිශීලක අත්පොත (මෙම ලේඛනය)

4. පිහිටුවීම සහ ස්ථාපනය

Follow these steps to install your Sharkoon Rebel P10 PSU into your computer system:

1. ඔබේ පද්ධතිය සූදානම් කරන්න: Ensure your computer is completely powered off and disconnected from the wall outlet. Open your PC case to access the PSU mounting area.
2. පැරණි PSU ඉවත් කරන්න (අදාළ නම්): Disconnect all cables from your old PSU and remove it from the case.
3. නව PSU එක සවි කරන්න: Carefully place the Sharkoon Rebel P10 into the designated PSU bay in your PC case. Secure it with the provided mounting screws. Ensure the fan faces the correct direction for optimal airflow (typically facing downwards if your case has a bottom vent, or inwards if it's a top-mounted PSU).
   

   රූපය: ප්‍රධාන view of the Sharkoon Rebel P10 850W Power Supply Unit. This image shows the primary casing and fan grill, illustrating the unit's compact design for easy installation into a PC chassis.
4. මවු පුවරුවේ බලය සම්බන්ධ කරන්න: Connect the 24-pin ATX power connector to your motherboard's 24-pin socket. Ensure it clicks securely into place.
5. CPU බලය සම්බන්ධ කරන්න: Connect the 4+4-pin EPS/ATX12V connector(s) to your motherboard's CPU power socket(s).
6. Connect PCIe Power: For graphics cards, connect the appropriate PCIe power connectors (e.g., 6+2-pin) to your graphics card(s). The Rebel P10 supports ATX 3.1, ensuring compatibility with the latest generation of power-hungry GPUs.
   

   Image: A selection of flat cables included with the Sharkoon Rebel P10 850W Power Supply Unit. These flat cables are designed for improved cable management and better airflow within the computer case.

7. Connect Peripheral Power: Connect SATA power connectors to your SSDs, HDDs, and optical drives. Use Molex connectors for any other compatible peripherals. The flat cable design of the Rebel P10 aids in efficient cable routing and improved airflow.
8. කේබල් කළමනාකරණය: Organize cables neatly to ensure proper airflow and a tidy build.
9. කේස් එක වසා AC බලය සම්බන්ධ කරන්න: Close your PC case. Connect the AC power cable to the PSU's power inlet and then to a grounded wall outlet. Ensure the power switch on the PSU is in the 'OFF' position before connecting to the wall outlet.
   

   රූපය: පසුපස view of the Sharkoon Rebel P10 850W Power Supply Unit, showing the AC power input and the main power switch. This switch controls the power flow to the unit.

5. මෙහෙයුම් උපදෙස්

Once the PSU is installed and all connections are secure:

1. බල ගැන්වීම: Flip the power switch on the back of the PSU to the 'ON' position.
2. පද්ධති ආරම්භය: ඔබේ පද්ධතිය ආරම්භ කිරීමට ඔබේ පරිගණක ආවරණයේ බල බොත්තම ඔබන්න.
3. නිහඬ මෙහෙයුම: The Rebel P10 features a 120mm fan with a fluid dynamic bearing, designed for quiet operation even under load.

6. නඩත්තු කිරීම

Regular maintenance helps ensure the longevity and optimal performance of your PSU:

• දූවිලි ඉවත් කිරීම: සම්පීඩිත වාතය භාවිතයෙන් PSU හි විදුලි පංකාවේ සහ වාතාශ්‍රය ග්‍රිල් වල දූවිලි වරින් වර පිරිසිදු කරන්න. පිරිසිදු කිරීමට පෙර පද්ධතිය ක්‍රියා විරහිත කර පේනුවෙන් ඉවත් කර ඇති බවට සහතික වන්න.
• කේබල් පරීක්ෂාව: Occasionally check that all power cables are securely connected and not obstructing airflow.
• ස්ථාවර වෙළුමtage: The Rebel P10 utilizes DC/DC technology for optimal and accurate voltage regulation, contributing to system stability.

7. දෝශ නිරාකරණය

If you encounter issues with your PSU, consider the following:

• බලය නැත:
  • Ensure the AC power cable is securely connected to both the PSU and the wall outlet.
  • PSU පිටුපස ඇති බල ස්විචය 'ON' ස්ථානයේ ඇති බව තහවුරු කර ගන්න.
  • Check the wall outlet by plugging in another device.
  • Ensure all internal power connectors (24-pin, CPU, PCIe) are firmly seated.
• පද්ධති අස්ථාවරත්වය/බිඳවැටීම්:
  • ඔබේ පද්ධතියේ බල අවශ්‍යතා PSU හි 850W ධාරිතාව ඉක්මවා නොයන බවට වග බලා ගන්න.
  • Verify all components are correctly installed and receiving power.
  • The Rebel P10 includes comprehensive protection features (e.g., overcurrent, overload protection) to prevent damage in case of anomalies. If the PSU shuts down unexpectedly, it might be due to one of these protections activating.
• අසාමාන්ය ශබ්දය:
  • Check for any cables or obstructions interfering with the PSU fan.
  • Ensure the PSU is securely mounted to prevent vibrations.

If problems persist, consult a qualified technician or contact Sharkoon support.

8. පිරිවිතර

9. වගකීම් සහ සහාය

Sharkoon products are manufactured to high quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Sharkoon webඅඩවිය.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please visit the official Sharkoon support page or contact their customer service department. Contact information can typically be found on the manufacturer's webඅඩවිය:

www.sharkoon.com