1. වැදගත් ආරක්ෂක තොරතුරු
Operating a laser engraver involves inherent risks. Adhere strictly to all safety guidelines to prevent injury and damage. This device is a Class 4 laser product.
- අක්ෂි ආරක්ෂාව: Always wear the provided safety glasses or equivalent laser-protective eyewear when the machine is in operation. The panoramic magnetic eye protection shield filters 97% of strong light, but direct exposure to the laser beam can cause permanent eye damage.
- වාතාශ්රය: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting.
- ගිනි ආරක්ෂාව: Keep a fire extinguisher nearby. Never leave the machine unattended during operation, especially when cutting materials that may ignite.
- ද්රව්ය ආරක්ෂාව: Engrave and cut only approved materials. Certain materials can produce toxic fumes or catch fire easily.
- හදිසි නැවතුම: හදිසි නැවතුම් බොත්තමේ පිහිටීම සහ එය භාවිතා කරන ආකාරය පිළිබඳව ඔබව හුරු කර ගන්න.
බිල්ට් ආරක්ෂිත විශේෂාංග:
- ගිනිදැල් අනාවරකය: The IKIER X5 Pro is equipped with a flame detector that will automatically stop processing and trigger a buzzer alarm if it detects a flame.
- Tilt Sensor (Gyroscope): The machine will automatically stop operation and sound an alarm if it tilts more than 15 degrees, preventing accidents from unexpected movement.
Image: The IKIER X5 Pro's integrated flame detector and gyroscope for enhanced operational safety.
2. පැකේජ අන්තර්ගතය
Verify that all components listed below are present in your package before proceeding with assembly.
- IKIER X5 Pro Laser Engraver (main unit)
- Installation Toolkit (screws, wrenches, etc.)
- බල කේබලය
- බල ඇඩැප්ටරය
- USB Flash Drive (containing software and drivers)
- C කේබල් වර්ගය
- X-axis Connecting Line
- Focus Shims
- ආරක්ෂිත වීදුරු
- නිෂ්පාදන අත්පොත
Image: All components included in the IKIER X5 Pro Laser Engraver package.
3. එකලස් කිරීම සහ සැකසීම
The IKIER X5 Pro is designed for quick assembly, typically completed within 10-20 minutes. The full aluminum alloy structure ensures stability and durability.
- සංරචක ඉවත් කරන්න: Carefully remove all items from the packaging and place them on a clean, flat surface.
- රාමුව එකලස් කරන්න: Follow the step-by-step instructions in the included Product Manual to connect the frame components using the provided toolkit. Ensure all screws are securely tightened, but avoid over-tightening, which can cause rail friction.
- Install Laser Module: Mount the laser module onto the gantry. The integral lead screw design ensures precise laser movement.
- කේබල් සම්බන්ධ කරන්න: Connect the power cable, Type C cable, and X-axis connecting line as indicated in the manual.
- මූලික බලය සක්රිය කිරීම: Connect the power adapter and turn on the machine. Observe for any unusual sounds or movements.
Image: Visual guide for quick assembly, mobile app connection, and direct engraving setup.
4. මෙහෙයුම් උපදෙස්
Software and Connectivity:
The IKIER X5 Pro supports various operating systems and file formats, offering flexible control options.
- මෙහෙයුම් පද්ධති: Compatible with Linux, Mac OS, and Windows.
- File ආකෘති: Supports SVG, PNG, DXF, TIF, BMP, and PDF.
- Next-Generation APP Control: Utilize the dedicated mobile application for a streamlined user experience and enhanced control functions. This allows for convenient operation directly from your smartphone or tablet.
- නොබැඳි කැටයම්: The machine supports offline engraving, enabling you to engrave projects without a continuous computer connection once the file පටවනු ලැබේ.
- බලශක්ති පාඩු ප්රතිසාධනය: හදිසි බලයක් ඇති වූ විට outage or accidental interruption, the machine features a power loss recovery function, allowing it to resume engraving from the exact original position.
කැටයම් සහ කැපීමේ ක්රියාවලිය:
- ද්රව්ය සකස් කරන්න: Place your chosen material securely within the working area (410x380mm).
- ලේසර් අවධානය යොමු කරන්න: Use the provided focus shims to set the correct focal distance for optimal engraving and cutting precision. The laser spot area is 0.06*0.06mm, balancing precision and cutting energy.
- පැටවුම් නිර්මාණය: Transfer your design file to the machine via USB or the connected software/APP.
- පරාමිතීන් සකසන්න: Adjust engraving/cutting parameters (speed, power, passes) based on the material type and desired outcome.
- මෙහෙයුම ආරම්භ කරන්න: Initiate the engraving or cutting process. Monitor the machine closely, especially during the initial stages.
Image: The IKIER X5 Pro offers 0.01mm precision engraving with a fine laser spot size of 0.06*0.06mm.
Image: Demonstrates the 5W laser's ability to cut 5mm Paulownia wood and 3mm black acrylic in a single pass.
5. ද්රව්ය අනුකූලතාව
The IKIER X5 Pro is suitable for engraving and cutting a wide range of materials. Always test on a small, inconspicuous area first to determine optimal settings.
- කැටයම්: Wood, Glass, Plastic, Leather, Rubber, Paper, Cardboard, Anodized Aluminum, Stainless Steel (with coating), Ceramics (with coating), Stone.
- කැපීම: Wood (up to 5mm Paulownia), Paper, Cardboard, Leather, Non-transparent Acrylic (up to 3mm black acrylic), Fabric.
සටහන: Transparent materials like clear acrylic or glass may require a dark coating (e.g., paint or marker) on the surface for the laser to interact effectively.
6. නඩත්තු කිරීම
Regular maintenance ensures the longevity and optimal performance of your IKIER X5 Pro laser engraver.
- Clean Laser Lens: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to ensure clear laser output.
- රේල් පීලි සහ රෝද පිරිසිදු කරන්න: Keep the X and Y axis rails and wheels free from dust and debris. A build-up can affect movement precision.
- පටි ආතතිය පරීක්ෂා කරන්න: Ensure the timing belts are properly tensioned. Loose belts can lead to inaccurate engraving.
- ස්ථිරාංග යාවත්කාලීන කිරීම්: නිල IKIER පරීක්ෂා කරන්න website or APP for any available firmware updates to ensure your machine has the latest features and bug fixes.
7. දෝශ නිරාකරණය
This section addresses common issues you might encounter. For more complex problems, refer to the comprehensive manual or contact customer support.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| යන්ත්රය ක්රියාත්මක නොවේ. | Power cable loose, power adapter faulty, power switch off. | Check all power connections. Ensure the power switch is in the 'ON' position. Test power adapter if possible. |
| Laser not firing or weak. | Laser lens dirty, focus incorrect, power setting too low, laser module faulty. | Clean the laser lens. Re-focus the laser using shims. Increase laser power in software. Contact support if issue persists. |
| Engraving/cutting is inaccurate or skipped lines. | Loose belts, dirty rails, stepper motor issue, material not secured. | Check and tighten timing belts. Clean X and Y axis rails. Ensure material is firmly secured. Verify all assembly bolts are appropriately tightened, as over-tightening can cause rough movement. |
| Machine stops unexpectedly with alarm. | Flame detected, machine tilted, emergency stop pressed. | Check for flames or smoke. Ensure the machine is on a stable, level surface. Release emergency stop button if pressed. |
| Software/APP not connecting to machine. | Incorrect cable connection, driver issues, software version mismatch. | Verify USB/Type C cable connection. Reinstall drivers from the USB flash drive. Ensure software/APP is the latest version. |
8. පිරිවිතර
Key technical specifications for the IKIER X5 Pro Laser Engraver.
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආකෘතිය | IKIER X5 Pro |
| ලේසර් ප්රතිදාන බලය | 5000 මෙගාවොට් (5 වොට්) |
| ලේසර් පන්තිය | 4 පන්තිය |
| Laser Spot Area | 0.06 * 0.06 මි.මී |
| කැටයම් ප්රදේශය | 410 x 380 මි.මී. (අඟල් 16.14 x 14.96) |
| නිෂ්පාදන මානයන් | අඟල් 22.8 x 22.6 x 7.6 |
| අයිතමයේ බර | රාත්තල් 12.18 කි |
| ද්රව්ය | ඇලුමිනියම් මිශ්ර ලෝහය |
| බලශක්ති ප්රභවය | AC/DC |
| සහාය දක්වන OS | Linux, Mac OS, Windows |
| සහාය දුන්නා File ආකෘති | SVG, PNG, DXF, TIF, BMP, PDF |
Image: The generous 410x380mm working area of the IKIER X5 Pro.
9. වගකීම් සහ සහාය
For warranty information, please refer to the documentation included with your product or visit the official IKIER website. If you encounter any issues or require technical assistance, please contact IKIER customer support. They are available to help with troubleshooting and provide guidance for optimal use of your laser engraver.
සබඳතා තොරතුරු: Refer to the official IKIER website or the contact details provided in your product manual for the most up-to-date support channels.
සබැඳි සම්පත්: Explore online forums, community groups, and official IKIER tutorials for additional tips and project ideas.
