IRONZON Fingerprint Door Lock User Manual

1. හැඳින්වීම

Thank you for choosing the IRONZON Fingerprint Door Lock. This biometric and keypad door lock provides enhanced security and convenience for your home, hotel, office, apartment, or bedroom. It offers multiple unlocking methods including fingerprint, passcode, and physical key. This manual provides comprehensive instructions for installation, setup, operation, and maintenance to ensure optimal performance and longevity of your lock.

ස්ථාපනය කිරීමට සහ භාවිතා කිරීමට පෙර කරුණාකර මෙම අත්පොත හොඳින් කියවා, අනාගත යොමුව සඳහා තබා ගන්න.

2 ආරක්ෂිත තොරතුරු

• අගුල ඔබම විසුරුවා හැරීමට හෝ අලුත්වැඩියා කිරීමට උත්සාහ නොකරන්න. සේවාව සඳහා සුදුසුකම් ලත් පුද්ගලයින් වෙත යොමු වන්න.
• Use only specified AAA batteries (not included). Do not mix old and new batteries or different types of batteries.
• Ensure the emergency key is stored in a safe and accessible location outside the room where the lock is installed.
• සෘජු හිරු එළිය, වර්ෂාව හෝ අධික උෂ්ණත්වයන්ට අගුල නිරාවරණය කිරීමෙන් වළකින්න.
• Keep the fingerprint sensor and keypad clean and dry for optimal performance.

3. පැකේජ අන්තර්ගතය

ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

• Front Handle Assembly (with keypad and fingerprint sensor)
• Rear Handle Assembly (with battery compartment)
• ලෑච් බෝල්ට්
• වැඩ වර්ජන තහඩුව
• සවිකරන ඉස්කුරුප්පු
• භෞතික යතුරු (2)
• ස්ථාපන ආකෘතිය
• පරිශීලක අත්පොත

4. නිෂ්පාදන අවසන්view

The IRONZON Fingerprint Door Lock integrates advanced security features into a sleek design. The front handle features a biometric fingerprint sensor and a numeric keypad for convenient access. The rear handle houses the battery compartment and the manual override. The lock is designed for ambidextrous use and is compatible with standard US doors.

Image: The IRONZON Fingerprint Door Lock, displaying both the exterior handle with its integrated keypad and fingerprint sensor, and the interior handle. The design is sleek and modern, with black and orange accents.

5. ස්ථාපනය

The IRONZON Fingerprint Door Lock is designed for DIY installation without the need for wiring or drilling, fitting US standard doors with backsets of 2-3/8″ (60mm) and 2-1/8″ (70mm), and door thicknesses from 1-3/8″ to 2-1/8″ (35mm-55mm).

5.1 පූර්ව ස්ථාපන පරීක්ෂාවන්

• Ensure your door meets the specified thickness and backset requirements.
• Confirm the door is prepared with standard boreholes for a cylindrical lock.

5.2 ලැච් බෝල්ට් එක සවි කිරීම

1. Insert the latch bolt into the door edge hole. Ensure the latch is oriented correctly for your door's swing.
2. සපයා ඇති ඉස්කුරුප්පු වලින් අගුළු බෝල්ට් එක සුරක්ෂිත කරන්න.

5.3 Installing the Exterior Assembly

1. Feed the cable from the exterior handle through the latch bolt and the door borehole.
2. Align the exterior handle with the latch bolt and the door, ensuring the spindle passes through the latch mechanism.

5.4 Installing the Interior Assembly

1. Connect the cable from the exterior assembly to the corresponding port on the interior assembly.
2. Align the interior assembly with the mounting posts from the exterior assembly and secure it with the provided screws.
3. Insert 4 AAA batteries into the battery compartment of the interior assembly.

Image: A detailed diagram illustrating the installation process of the IRONZON Fingerprint Door Lock, including measurements for compatible door thickness (1-3/8" to 2-1/8" or 35mm-55mm) and backset distance (2-3/8" or 60mm and 2-1/8" or 70mm). It shows the latch, front handle, and behind handle components.

6. සැකසුම සහ ක්‍රමලේඛනය

The lock features voice navigation in English, Chinese, and Spanish to guide you through the setup process.

Image: A visual representation of the voice guidance function of the IRONZON Fingerprint Door Lock, showing speech bubbles with prompts like "Please press your finger" and "Please enter the administrator information" next to the lock installed on a door.

6.1 Initial Setup (Administrator Fingerprint/Passcode)

1. Upon first power-up, the lock will prompt you to set an administrator.
2. Follow the voice prompts to register the first fingerprint or passcode. This will be your administrator access.
3. The administrator has full control over adding and deleting other users.

6.2 ඇඟිලි සලකුණු එකතු කිරීම

1. Access the programming menu using the administrator fingerprint or passcode.
2. Select the option to add a new fingerprint (refer to voice prompts).
3. Place the finger on the sensor multiple times as instructed until registration is complete. Up to 50 fingerprint groups can be added.

6.3 Adding Passcodes

1. Access the programming menu using the administrator fingerprint or passcode.
2. Select the option to add a new passcode.
3. Enter your desired passcode (minimum 6 digits) followed by the '#' key. Re-enter to confirm.

6.4 Deleting Users (Fingerprint/Passcode)

1. Access the programming menu using the administrator fingerprint or passcode.
2. Select the option to delete users. You may be able to delete individual users or all non-administrator users.

6.5 Voice Navigation Settings

The lock supports bilingual voice navigation. Refer to the voice prompts during setup to select your preferred language (Chinese, English, or Spanish) or to adjust the volume.

7. මෙහෙයුම් උපදෙස්

The IRONZON Fingerprint Door Lock offers three convenient ways to unlock your door.

Image: A visual guide demonstrating the three primary methods to unlock the IRONZON Fingerprint Door Lock: by placing a finger on the sensor (Fingerprint Unlock), by entering a code on the keypad (Passcode Unlock), and by using a physical key (Key Unlock).

7.1 ඇඟිලි සලකුණු අගුළු හැරීම

1. ලියාපදිංචි ඇඟිල්ලක් ඇඟිලි සලකුණු සංවේදකය මත තදින් තබන්න.
2. The lock will emit a confirmation sound and unlock if the fingerprint is recognized.

7.2 මුරකේත අගුළු හැරීම

1. යතුරු පුවරුව සක්‍රිය කිරීමට ඕනෑම යතුරක් ඔබන්න.
2. Enter your registered passcode followed by the '#' key.
3. The lock will emit a confirmation sound and unlock if the passcode is correct.

7.3 Key Unlock

1. Insert the physical key into the keyhole located on the exterior handle.
2. Turn the key to unlock the door manually.

7.4 Emergency Unlock / Charging

In case of low battery or power failure, the lock features a Type-C interface for emergency power supply.

Image: The IRONZON Fingerprint Door Lock installed on a door, with a USB Type-C cable plugged into the emergency charging port on the exterior handle, connected to a power bank. This illustrates how to provide emergency power to the lock.

1. Connect a Type-C cable from a power bank or other power source to the Type-C port on the bottom of the exterior handle.
2. තාවකාලික විදුලිය සැපයූ පසු, ඔබට දොර අගුළු ඇරීමට ඔබේ ඇඟිලි සලකුණ හෝ මුර කේතය භාවිතා කළ හැකිය.
3. Note: The Type-C port is for emergency power supply only and does not charge the internal batteries.

8. නඩත්තු කිරීම

8.1 බැටරි ප්රතිස්ථාපනය

The lock is powered by 4 AAA batteries (not included). The lock will provide a low battery reminder. Replace all four batteries promptly when indicated.

1. Locate the battery compartment on the interior handle.
2. Remove the cover and replace all old batteries with new AAA batteries, ensuring correct polarity.
3. බැටරි මැදිරි කවරය ප්රතිස්ථාපනය කරන්න.

8.2 පිරිසිදු කිරීම

Wipe the lock's surface, keypad, and fingerprint sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.

9. දෝශ නිරාකරණය

10. පිරිවිතර

• වෙළඳ නාමය: IRONZON
• ආදර්ශ අංකය: LOC191FOUSIR
• වර්ණය: Orb
• බාහිර නිමාව: කළු
• අගුළු වර්ගය: Biometric (Fingerprint) / Keypad / Key
• බලශක්ති ප්රභවය: 4 x AAA බැටරි (ඇතුළත් කර නැත)
• හදිසි බලය: Type-C USB Port
• ඇඟිලි සලකුණු ධාරිතාව: කණ්ඩායම් 50 දක්වා
• දොර ඝණකම අනුකූලතාව: 1-3/8″ to 2-1/8″ (35mm-55mm)
• පසුපෙළ අනුකූලතාව: 2-3/8″ (60mm) and 2-1/8″ (70mm)
• අත් දිශානතිය: Ambidextrous (Reversible Handle)
• ද්රව්ය: මල නොබැඳෙන වානේ (හසුරුව)
• අයිතමයේ බර: රාත්තල් 1.87 (කිලෝග්‍රෑම් 0.85)
• නිෂ්පාදන මානයන්: අඟල් 6.3 x 2.3 x 2.3

11. වගකීම් සහ සහාය

For warranty information and technical support, please contact IRONZON customer service through the retailer where you purchased the product or visit the official IRONZON website. Please have your model number (LOC191FOUSIR) and purchase date available when contacting support.