1. හැඳින්වීම
This manual provides essential information for the safe and effective operation of your GOOLOO GP3000 Jump Starter and GOOLOO AP150 PRO Portable Tire Inflator. Please read all instructions carefully before use and retain this manual for future reference.
2. වැදගත් ආරක්ෂක තොරතුරු
Always observe the following safety precautions to prevent injury or damage to the devices:
- Do not immerse the devices in water or expose them to rain.
- Do not operate the devices if they are damaged.
- දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
- Do not disassemble the devices. Refer all servicing to qualified personnel.
- සපයා ඇති හෝ අනුමත උපාංග පමණක් භාවිතා කරන්න.
- භාවිතයේදී සහ ආරෝපණය කිරීමේදී නිසි වාතාශ්රය සහතික කරන්න.
- Avoid short-circuiting the clamps of the jump starter.
- ශීත කළ බැටරියක් ආරම්භ නොකරන්න.
- ජම්ප් ස්ටාටරය ක්රියාත්මක කරන විට අක්ෂි ආරක්ෂාව පළඳින්න.
- The tire inflator can become hot during prolonged use. Allow it to cool before handling.
3. පැකේජ අන්තර්ගතය
ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:
- GOOLOO GP3000 Jump Starter
- ස්මාර්ට් ජම්පර් Clamps
- GOOLOO AP150 PRO Portable Tire Inflator
- Air Nozzle Adapters (various types)
- USB-C ආරෝපණ කේබලය
- පරිශීලක අත්පොත
- ගබඩා නඩුව
4. නිෂ්පාදන අවසන්view
4.1 GOOLOO GP3000 Jump Starter
The GP3000 is a powerful 3000A peak current jump starter designed for 12-volt vehicles (up to 9-liter gasoline and 7-liter diesel engines). It also functions as a portable power bank and an emergency LED light.
Image: The GOOLOO GP3000 Jump Starter unit shown with its smart jumper clamps. The unit is black and yellow, featuring a power button and battery indicator lights.
ප්රධාන ලක්ෂණ:
- 3000A උපරිම ධාරාව: Capable of starting large engines.
- "BOOST" ශ්රිතය: සම්පූර්ණයෙන්ම අක්රිය හෝ අඩු පරිමාවක් සඳහාtagඊ බැටරි.
- බහු ආරක්ෂණ පද්ධතිය: Includes over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltage, අධි බර සහ ප්රතිලෝම ආරෝපණ ආරක්ෂාව.
- අතේ ගෙන යා හැකි බලශක්ති බැංකුව: USB output ports for charging mobile devices.
- LED ෆ්ලෑෂ් ලයිට්: With Normal, Strobe, and SOS modes.
Image: The GOOLOO GP3000 Jump Starter highlighting its comprehensive safety features, including icons for over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltage, අධි බර සහ ප්රතිලෝම ආරෝපණ ආරක්ෂාව.
4.2 GOOLOO AP150 PRO Portable Tire Inflator
The AP150 PRO is a portable air compressor designed for fast and precise tire inflation. It features a dynamic LED display, multiple inflation modes, and also serves as a power bank and emergency light.
Image: The GOOLOO AP150 PRO Portable Tire Inflator shown with its various nozzle adapters and examples of vehicles and items it can inflate, such as cars, motorcycles, bicycles, and balls.
ප්රධාන ලක්ෂණ:
- Super-Fast Inflation: High-performance motor for quick inflation.
- Dynamic Progress LED Display: Real-time tracking of inflation progress, visible even in bright sunlight.
- උද්ධමන ක්රම 5: Car, motorcycle, bicycle, ball, and custom.
- 3 Pressure Units: PSI, KPA, BAR.
- ස්මාර්ට් ස්වයංක්රීය වසා දැමීම: Automatically stops when the preset pressure is reached.
- High-Efficiency Battery Management System (BMS): Ensures safe and reliable operation.
- 45 Minutes Wireless Continuous Inflation: Long-lasting battery performance.
- 3-in-1 බහුකාර්ය නිර්මාණය: Air pump, mobile power supply, and emergency LED light (lighting and SOS modes).
Image: The GOOLOO AP150 PRO Tire Inflator's large LED screen, illustrating its five different inflation modes (car, motorcycle, bicycle, ball, and custom) with corresponding icons and color changes.
5. පිහිටුවීම සහ ආරෝපණය කිරීම
5.1 Charging the GOOLOO GP3000 Jump Starter
Before first use, fully charge the GP3000. Connect the provided USB-C charging cable to the input port on the jump starter and to a USB wall adapter (not included). The battery indicator lights will illuminate to show charging progress. All lights will be solid when fully charged.
5.2 Charging the GOOLOO AP150 PRO Tire Inflator
Fully charge the AP150 PRO before initial use. Connect the provided USB-C charging cable to the charging port on the inflator and to a USB power source. The LED display will indicate the charging status. The device is fully charged when the battery icon shows full.
6. මෙහෙයුම් උපදෙස්
6.1 Operating the GOOLOO GP3000 Jump Starter
- ජම්ප් ස්ටාර්ටරය අවම වශයෙන් 50% ක් ආරෝපණය කර ඇති බවට වග බලා ගන්න.
- සම්බන්ධ කරන්න රතු clamp වාහනයේ ධන (+) බැටරි පර්යන්තයට.
- සම්බන්ධ කරන්න කළු clamp වාහනයේ සෘණ (-) බැටරි පර්යන්තයට.
- cl සහතික කරන්නamps are securely connected and the smart cable indicator light is green.
- If the indicator light is not green, or the vehicle battery is completely dead, press the බූස්ට් button on the smart cable. Wait for the indicator light to turn green.
- වාහනයේ එන්ජිම පණ ගන්වන්න.
- Once the engine starts, immediately remove the smart clamps from the vehicle battery, first the black clamp, then the red clamp.
අතේ ගෙන යා හැකි බලශක්ති බැංකුවක් ලෙස භාවිතා කිරීම:
Connect your USB-powered devices to the USB output ports on the GP3000 using appropriate charging cables. The jump starter will automatically begin charging your devices.
Image: The GOOLOO GP3000 Jump Starter demonstrating its function as a portable power bank, charging various electronic devices like smartphones, tablets, and smartwatches.
LED ආලෝකය භාවිතා කිරීම:
Press and hold the power button on the GP3000 to turn on the LED flashlight. Press again to cycle through Normal, Strobe, and SOS modes. Press and hold to turn off.
Image: A user operating the GOOLOO GP3000 Jump Starter's LED light function in a dark engine bay, illustrating its utility as an emergency light source with Normal, Strobe, and SOS modes.
6.2 Operating the GOOLOO AP150 PRO Tire Inflator
- Ensure the AP150 PRO is sufficiently charged.
- Connect the air hose to the inflator and securely screw the nozzle onto the tire valve stem.
- Press the power button to turn on the inflator. The LED display will show the current tire pressure.
- Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball, or custom).
- ඉලක්ක පීඩනය සැකසීමට '+' සහ '-' බොත්තම් භාවිතා කරන්න.
- Press the inflation button (often indicated by a fan icon) to start inflation. The display will show real-time pressure.
- The inflator will automatically shut off once the preset pressure is reached.
- Unscrew the nozzle from the tire valve and disconnect the air hose.
Image: The GOOLOO AP150 PRO Portable Tire Inflator actively inflating a car tire, demonstrating its cordless and fast inflation capability. The digital display shows the pressure reading.
Image: The GOOLOO AP150 PRO Tire Inflator's display showing both the real-time tire pressure and the preset target pressure, with clear visibility even in bright sunlight, and highlighting its auto shut-off feature.
Using as a Portable Power Bank and LED Light:
The AP150 PRO can also charge small electronic devices via its USB output port. It includes an integrated LED light with lighting and SOS modes, activated by a dedicated button, for use in emergencies or low-light conditions.
7. නඩත්තු කිරීම හා ගබඩා කිරීම
- Clean the devices with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- උපාංග දෙකම සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
- For optimal battery life, charge both devices every 3-6 months, even if not in use.
- Keep the charging ports and air nozzle free from dust and debris.
8. දෝශ නිරාකරණය
8.1 GP3000 Jump Starter Issues
- Vehicle does not start: cl සහතික කරන්නamps are connected correctly and securely. Check if the jump starter has sufficient charge. Try using the බූස්ට් function if the battery is completely dead.
- ස්මාර්ට් clamp indicator light is red: This indicates a reverse polarity connection or a short circuit. Disconnect and reconnect the clamps නිවැරදිව.
8.2 AP150 PRO Tire Inflator Issues
- පුම්බන යන්ත්රය ක්රියාත්මක නොවේ: උපාංගය ආරෝපණය කර ඇති බවට සහතික වන්න.
- Inflator does not start pumping: Check if the hose is securely connected to both the inflator and the tire valve. Ensure a target pressure is set and the inflation button is pressed.
- වැරදි පීඩන කියවීම: Ensure the nozzle is tightly screwed onto the tire valve to prevent air leakage.
9. පිරිවිතර
9.1 GOOLOO GP3000 Jump Starter
| උච්ච ධාරාව | 3000A |
| ආරම්භය වෙළුමtage | 12V |
| එන්ජින් ගැළපුම | 9.0L දක්වා ගෑස්, 7.0L ඩීසල් |
| USB ප්රතිදානය | 5V/2.4A, 9V/2A, 12V/1.5A (ඉක්මන් ආරෝපණය) |
| ආදානය | USB-C 5V/3A, 9V/2A |
| මෙහෙයුම් උෂ්ණත්වය | -4°F සිට 140°F (-20°C සිට 60°C) |
9.2 GOOLOO AP150 PRO Portable Tire Inflator
| උපරිම උද්ධමන පීඩනය | 150 PSI |
| බැටරි ආයු කාලය | Up to 45 minutes continuous inflation |
| උද්ධමන මාදිලි | කාර්, යතුරුපැදි, බයිසිකලය, බෝලය, රේගු |
| පීඩන ඒකක | PSI, KPA, BAR |
| මෙහෙයුම් උෂ්ණත්වය | -4°F සිට 140°F (-20°C සිට 60°C) |
| ආදානය | USB-C |
10. වගකීම් සහ සහාය
GOOLOO products come with a standard warranty. For detailed warranty information, product support, or to report any issues, please visit the official GOOLOO website or contact their customer service directly. Contact information can typically be found on the product packaging or the GOOLOO brand store on Amazon.
